Fine Particle and Aerosol Technology Laboratory, Department of Environmental and Biological Sciences, University of Eastern Finland, Kuopio 70211, Finland
Auto-generated profile, based on publicly available information
Sara-Maaria Alatalo
Fine Particle and Aerosol Technology Laboratory, Department of Environmental and Biological Sciences, University of Eastern Finland, Kuopio 70211, Finland
The hydrothermal carbonization (HTC) technique has shown a great ability in the synthesis of carbon materials with special properties for a wide range of different applications. Here, a hypersaline salt mixture (LiCl–ZnCl2) combined with hydrothermal carbonization was applied in order to obtain sulfur containing micro- and mesoporous (0.3–40 nm) monolithic carbons with high surface areas (400–550 m2 g−1) and well developed porosity (0.4–1.2 cm3 g−1). Fructose was used as a carbon source and sulfur was introduced in an aromatic configuration as 2-thiophenecarboxaldehyde. The resulting carbon materials showed a promising removal capacity (qe = 0.3 mmol g−1) towards methylene blue and the adsorption followed the Sips isotherm independent of the pH. Intraparticle diffusion appeared to control the adsorption kinetics. Carbon materials could be easily regenerated with simple ethanol washing. The dye pollutant could be completely desorbed from the adsorbent's surface, while the adsorbent still maintained removal efficiency of above 90% during three cycles.
Silicon, a material with high theoretical energy density, holds great promise as a candidate material for anodes in lithium-ion batteries. However, due to an alloying mechanism the material undergoes volume expansion of up to 300%, which results in rapid capacity fading. The coating of silicon with carbon is done by using a biomass-based carbon precursor. The effects of annealing temperature on the morphology of the silicon-carbon structures is presented herein. The mechanically and chemically treated barley straw is mixed with silicon particles and induction annealed in argon atmosphere under different temperatures. The material transformation from carbon-coated silicon (Si@C) to graphite-coated silicon carbide (SiC@graphite) is studied. The Si@C displayed initial specific capacity of 1200 mAh g −1 at 0.1 A g −1 , while the capacity retention analysis of Si@C revealed improved cycling stability compared to bare silicon.