Tailpipe emissions from road traffic contribute substantially to the burden of fine inhalable particulate matter (PM 2.5 ) and deteriorate air quality. Exhaust emission standards, forcing improvements in combustion and exhaust after-treatment technology, considerably decreases combustion-related PM 2.5 emitted by modern cars. A549 cancerous alveolar and BEAS-2B normal bronchial epithelial cells were exposed at the air-liquid interface to the total aerosol or gas phase of either fresh or photochemically aged tailpipe emissions from a gasoline EURO 6d car equipped with a gasoline particulate filter. Diluted fresh emissions contained particle number concentrations comparable to low ambient air levels and induced no detectable cytotoxicity. Photochemical aging led to the formation of secondary aerosols and caused significant cytotoxicity. While the aged aerosol induced significant DNA damage, oxidative stress was more associated with volatile secondary species. Our results call for the consideration of the exhaust emission atmospheric transformation processes in future emission standards toward health effect-driven emission regulations.
Silicon, a material with high theoretical energy density, holds great promise as a candidate material for anodes in lithium-ion batteries. However, due to an alloying mechanism the material undergoes volume expansion of up to 300%, which results in rapid capacity fading. The coating of silicon with carbon is done by using a biomass-based carbon precursor. The effects of annealing temperature on the morphology of the silicon-carbon structures is presented herein. The mechanically and chemically treated barley straw is mixed with silicon particles and induction annealed in argon atmosphere under different temperatures. The material transformation from carbon-coated silicon (Si@C) to graphite-coated silicon carbide (SiC@graphite) is studied. The Si@C displayed initial specific capacity of 1200 mAh g −1 at 0.1 A g −1 , while the capacity retention analysis of Si@C revealed improved cycling stability compared to bare silicon.
Generally, large-scale production of graphene is currently not commercially viable due to expensive raw materials, complexity and the high-energy consumption of the processes currently used in the production. The use of biomass precursors and energy efficient procedures for carbonization have been proposed to reduce the cost of the graphene materials. However, low-cost graphene production has not been accomplished yet. Herein, we present a sustainable procedure and renewable starting materials to synthesize carbon nanostructures with graphene-like features. First, a SiC/C composite was synthesized from phytoliths and sucrose through magnesiothermic reduction. The phytoliths were obtained from barley husk that is an abundant side stream of agricultural industry. Second, graphene-like structures were achieved by the graphitization of SiC/C composite with high temperature induction annealing at 2400 °C under atmospheric pressure. The formation of graphene-like carbon was initiated by vaporization of silicon from the pre-ceramic SiC/C. Complete transformation of SiC/C to hollow, spherical graphene-like carbon structures and sheets were verified with thermogravimetry, x-ray diffraction, energy dispersive spectroscopy, electron microscopy and Raman spectroscopy. Also, the theoretical thermodynamic consideration of the phase separation of silicon carbide and the role of free carbon in the process has been discussed.
This study presents an oxalic acid-assisted method for synthesizing spinel-structured lithium titanate (Li4Ti5O12; LTO)/carbon composite materials. The Ag-doped LTO nanoparticles (NPs) are synthesized via flame spray pyrolysis (FSP). The synthesized material is used as a precursor for synthesizing the LTO-NP/C composite material with chitosan as a carbon source and oxalic acid as an additive. Oxalic acid improves the dissolution of chitosan in water as well as changes the composition and physical and chemical properties of the synthesized LTO-NP/C composite material. The oxalic acid/chitosan ratio can be optimized to improve the electrochemical performance of the LTO-NP/C composite material, and the electrode synthesized with a high mass loading ratio (5.44 mg cm−2) exhibits specific discharge capacities of 156.5 and 136 mAh g−1 at 0.05 C- and 10 C-rate currents, respectively. Moreover, the synthesized composite LTO-NP/C composite material exhibits good cycling stability, and only 1.7% decrease in its specific capacity was observed after 200 charging–discharging cycles at 10 C-rate discharging current.