23 August 2018 in Measurement Science and Technology
Electrical capacitance tomography (ECT) is a non-intrusive and non-invasive imaging technique for the visualisation of material distribution, e.g. in a gas–solid fluidised bed. So far, ECT has been successfully used in gas–solid fluidised beds at ambient temperature. However, ECT has been rarely used in high-temperature gas–solid fluidised beds, which is of practical importance in many applications. Considering that most fluidised bed reactors are operated at high temperature, it is necessary to investigate the application of ECT in high-temperature industrial processes. In this work, a high-temperature ECT sensor, which can withstand 1073 K, is designed and fabricated. It has been verified by three stationary objects. The results show that the ECT sensor can give satisfactory images at different high-temperature levels and the change in temperature has little effect on the signal-to-noise ratio. It has also been found that the minimum bubbling velocity estimated by ECT is the same as that obtained by pressure drop measurements, and two fluidisation regimes, i.e. bubbling and slugging can be identified by ECT.
14 July 2021 in Chinese Physics B
The monocrystalline LiNbO3 (LN) and LiTaO3 (LT) plates have been qualified as a kind of material platform for high performance RF filter that is considerable for the 5G communication. LN and LT thin films are usually transferred on handle wafers by combining ion-slicing and wafer bonding technique to form a piezoelectric on insulator (POI) substrate. The ion implantation is a key process and the implantation-induced strain is essential for the layer transfer. Here, we reported the strain profile of ion implanted rotated Y-cut LN and LT. The ion implantation generates the out-of-plane tensile strain of the sample surface and (006) plane, while both the tensile and compressive strain are observed on the (030) plane. The implanted ions redistributed due to the anisotropy of LN and LT, and induce the main tensile normal to the (006) plane. Meanwhile, the (030) planes are contracted due to the Poisson effect with the interstitial ions disturbing and mainly show a compressive strain profile.