The present paper demonstrates a novel partial negative curvature hollow-core fiber for low-loss terahertz transmission. In the optimized fiber structure, the tubes in the vertical direction are replaced by plate-like dielectric sheets, thereby achieving low loss and low blocked risk of 3D printing, while retaining a small fiber hollow core and fiber diameter. The 3D printed fiber is characterized by a terahertz time-domain spectroscopy (THz-TDS) system. The obtained transmission spectrum demonstrates the mode beating phenomenon and its peak position varies periodically with fiber length at short distances. The thin antiresonant walls endow the fiber with two broad low-loss windows of 0.2–0.4 THz and 0.55–0.85 THz. Besides, the x-polarization and y-polarization waves achieve minimum losses of 16.2 dB/m@0.28 THz and 16.0 dB/m@0.29 THz, respectively. Furthermore, our fiber has low experimental dispersions, namely −0.18±1.1 ps/THz/cm (x-pol) and 0.67±0.77 ps/THz/cm (y-pol). The experimental losses and dispersions match well with the simulation results. Additionally, the simulation results reveal that the fiber has the potential to attain a high birefringence of 10 −3 .
3 December 2019 in Journal of Physics D: Applied Physics
The tapered long-period fiber grating (TLPFG) and rotated chiral long-period fiber gratings (CLPFG) heated by a CO 2 laser were fabricated by periodically tapering and rotating standard single-mode fibers (SMF). The temperature sensing characteristics of the TLPFG and CLPFG between 30 °C and 60 °C were experimentally investigated, and the slopes of the wavelength shift corresponded to 0.115 nm °C −1 and 0.04 nm °C −1 , respectively. The graphene films were coated on gratings to fabricate graphene-coated TLPFG (GTLPFG) and graphene-coated CLPFG (GCLPFG). Given the thermal effects of graphene, the slopes of the resonance dip shift of the GTLPFG and GCLPFG between 30 °C and 60 °C increased to 0.196 nm °C −1 and 0.113 nm °C −1 , respectively. Additionally, the high temperature sensing properties of TLPFG and CLPFG between 100 °C and 1000 °C were investigated. The slopes of the higher-order resonance dips of the TLPFG and CLPFG corresponded to 0.119 nm °C −1 and 0.09 nm °C −1 , respectively, during the heating process, and to 0.116 °C −1 and 0.09 nm °C −1 , respectively, during the cooling process. In the low and high temperature zones, the TLPFG exhibited higher sensitivity when compared to that of the CLPFG, while the CLPFG exhibited higher sensing precision with linearity approaching 1. Given the simple and unsophisticated fabrication process and the high quality and sensitivity of the fabricated gratings, the proposed sensors can play an important role in high-precision temperature-sensing applications.
Imaging an object hidden behind a highly scattering medium is difficult since the wave has gone through a round-trip distortion: On the way in for the illumination and on the way out for the detection. Although various approaches have recently been proposed to overcome this seemingly intractable problem, they are limited to two-dimensional (2D) intensity imaging because the phase information of the object is lost. In such a case, the morphological features of the object cannot be recovered. Here, based on the round-trip optical transmission matrix of the scattering medium, we propose an imaging method to recover the complex amplitude (both the amplitude and the phase) information of the object. In this way, it is possible to achieve the three-dimensional (3D) complex amplitude imaging. To preliminarily verify the effectiveness of our method, a simple virtual complex amplitude object has been tested. The experiment results show that not only the amplitude but also the phase information of the object can be recovered directly from the distorted output optical field. Our method is effective to the thick scattering medium and does not involve scanning during the imaging process. We believe it probably has potential applications in some new fields, for example, using the scattering medium itself as an imaging sensor, instead of a barrier.
A chiral long-period fiber grating (CLPFG) was fabricated by rotating the standard single mode fiber that fixed on two fiber holders with an axis-offset. We investigated the performance of CLPFGs by sensing the mechanical twist, bending, and liquid refractive index experimentally. The wide twist sensing range of ±720° and 26.7 nm wavelength tuning range were achieved. Compared with the tapered long-period fiber grating, the bending sensitivity of CLPFG is 5 times higher. Considering the simple and flexible fabrication process and low cost, this CLPFG may offer a simple and alternative choice for sensing mechanical deformation in the industrial applications.
To our knowledge, optical 4f systems have been widely used as a convolutional layer to perform convolutional computation in free-space optical neural networks (ONNs), which makes ONNs too bulky to be easily applied to miniaturized smart systems. Hence, we propose a compact lensless optoelectronic convolutional neural network (LOE-CNN) architecture in which a single optimized diffractive phase mask acts as an analog convolution processor to perform convolutional operation without a Fourier lens or lenslet array. We demonstrate that this LOE-CNN can be functionally comparable to existing electronic counterparts in classification performance, achieving a classification accuracy of 98.07% and 95% over the Modified National Institute of Standards and Technology dataset in simulation and experiment, respectively, which not only opens new application prospects for free-space ONNs based on a compact single-chip convolution processor, but also facilitates the development of ONN-based smart devices.