Aolong Sun

Aolong Sun

Auto-generated profile, based on publicly available information

Aolong Sun

Fudan University

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2025 in IEEE Journal on Selected Areas in Communications
Verified
Journal Article
Closed access
AYAn Yan
An Yan
ASAolong Sun
Aolong Sun
SXSizhe Xing
Sizhe Xing
GLGuoqiang Li
Guoqiang Li
WSWangwei Shen
Wangwei Shen
Junwen ZhangJunwen Zhang
Junwen Zhang
Coherent detection has emerged as a key technology for advancing passive optical networks (PON) beyond 100 Gbps per wavelength, due to its advantages over the intensity and direct-detection (IM/DD) approach, which was previously dominant in PON systems. In coherent PON architectures, the cost of the optical network unit (ONU) is substantial due to the complexity of its transceivers. Consequently, numerous studies have focused on simplifying the transmitters and receivers on the ONU side. Yet, simplifying the ONU transceiver introduces issues like reduced dynamic range and lower data rates. How to make a balance between the performance and the cost, particularly in terms of component complexity, represents a critical challenge for the advancement of coherent PON. Therefore, we propose and demonstrate a hybrid, multi-format, and flexible-rate bidirectional coherent PON system, supporting a compatible OLT and ONUs with different types of transceivers. ONUs are categorized into different tiers based on their performance and cost requirements, with transceivers of varying complexity allocated accordingly. As a demonstration of concept, we have successfully conducted experimental transmissions of 25-GBaud 4/16/64- quadrature-amplitude-modulation signals across 20-km fiber in a bidirectional setup, achieving data rates ranging from 50-Gbps to 300-Gbps. The low-end, middle-end, and high-end ONUs attain power budgets of 39/31/21 dB, 43/36/26 dB, and 40/33/23 dB, respectively. This architecture serves as an effective bridge from the current 50G IM/DD PON to the anticipated 200G coherent PON, meeting the varied requirements of users at different service levels.

17 July 2023 in Optics Express
Verified
Journal Article
Closed access
ASAolong Sun
Aolong Sun
XDXuyu Deng
Xuyu Deng
SXSizhe Xing
Sizhe Xing
ZLZhongya Li
Zhongya Li
JJJunlian Jia
Junlian Jia
Junwen ZhangJunwen Zhang
Junwen Zhang
Inverse design has been widely studied as an efficient method to reduce footprint and improve performance for integrated silicon photonic (SiP) devices. In this study, we have used inverse design to develop a series of ultra-compact dual-band wavelength demultiplexing power splitters (WDPSs) that can simultaneously perform both wavelength demultiplexing and 1:1 optical power splitting. These WDPSs could facilitate the potential coexistence of dual-band passive optical networks (PONs). The design is performed on a standard silicon-on-insulator (SOI) platform using, what we believe to be, a novel two-step direct binary search (TS-DBS) method and the impact of different hyperparameters related to the physical structure and the optimization algorithm is analyzed in detail. Our inverse-designed WDPS with a minimum feature size of 130 nm achieves a 12.77-times reduction in footprint and a slight increase in performance compared with the forward-designed WDPS. We utilize the optimal combination of hyperparameters to design another WDPS with a minimum feature size reduced to 65 nm, which achieves ultra-low insertion losses of 0.36 dB and 0.37 dB and crosstalk values of -19.91 dB and -17.02 dB at wavelength channels of 1310 nm and 1550 nm, respectively. To the best of our knowledge, the hyperparameters of optimization-based inverse design are systematically discussed for the first time. Our work demonstrates that appropriate setting of hyperparameters greatly improves device performance, throwing light on the manipulation of hyperparameters for future inverse design.

1 December 2024 in Photonics Research
Verified
Journal Article
Closed access
RSRuoyu Shen
Ruoyu Shen
FHFangchen Hu
Fangchen Hu
BHBingzhou Hong
Bingzhou Hong
XWXin Wang
Xin Wang
ASAolong Sun
Aolong Sun
WHWeiping Huang
Weiping Huang
Chip-scale multi-dimensional multiplexing technology that combines wavelengths and spatial modes on a silicon photonic integrated circuit (PIC) is highly promising for the link-capacity scaling of future optical interconnects. However, current multi-dimensional multiplexed PICs face significant challenges in simultaneously achieving broad optical bandwidth, low mode crosstalk, and dual-polarization modes in an ultra-compact footprint as the number of spatial modes increases. To address the issue, a topology-optimization-based inverse design assisted by a novel manufacturing calibration method (MCM) is utilized. Based on a 220 nm silicon-on-insulator (SOI) platform, a 100 nm broadband and ultra-compact (6 μm×6 μm) multi-dimensional multiplexed PIC supporting TE0, TE1, TM0, and TM1 modes with modes crosstalk <−16dB ranging from 1500 to 1600 nm is demonstrated for the first time, to the best of our knowledge. Furthermore, the PIC is implemented to experimentally enable a single-wavelength 4-modes ×100 Gbit/s PAM-4 direct modulation data transmission over 51 wavelengths with 0.8 nm channel spacing. This work shows the potential of utilizing multi-dimensional multiplexed PICs as optical interconnects to effectively address the speed limits of data transfer for future high-performance chip-to-chip interconnection.

11 December 2023 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
AYAn Yan
An Yan
GLGuoqiang Li
Guoqiang Li
ZLZhongya Li
Zhongya Li
JJJunlian Jia
Junlian Jia
SXSizhe Xing
Sizhe Xing
Junwen ZhangJunwen Zhang
Junwen Zhang
In high-speed optical communication systems, inter-symbol interferences (ISIs) and nonlinear distortions can occur due to the bandwidth limitations and nonlinear responses of optical and electrical components at the transceiver. To address these issues, this paper proposes the use of Bahl, Cocke, Jelinek and Raviv (BCJR) algorithm based on nonlinear channel models, such as the Volterra nonlinear filter and lookup table (LUT). Additionally, we introduce an ultra-low complexity BCJR algorithm, referred to as states-truncated BCJR based on reduced-size LUT (RLUT-ST-BCJR), to mitigate the impact of bandwidth limitations and nonlinear distortions. The RLUT-ST-BCJR uses a pruned LUT as the channel model emulator to assist in the calculation of the transition metric. Only the states with probabilities greater than a set threshold are retained in the decoding process, resulting in significantly reduced computational complexity. The experimental results confirm the improvement of both BER and normalized general mutual information (NGMI) performance using the proposed RLUT-ST-BCJR algorithm, compared to the conventional linear BCJR equalization. With this approach, we successfully transmit a 100-GBaud PAM-8 signal in both back-to-back and 1-km fiber cases, under the BER threshold of 2.4E-2 assuming 20% overhead soft-decision forward error correction.

18 March 2024 in Optics Letters
Verified
Journal Article
Closed access
AYAn Yan
An Yan
GLGuoqiang Li
Guoqiang Li
SXSizhe Xing
Sizhe Xing
WSWangwei Shen
Wangwei Shen
YHYongzhu Hu
Yongzhu Hu
Junwen ZhangJunwen Zhang
Junwen Zhang
The escalating surge in datacenter traffic creates a pressing demand for augmenting the capacity of cost-effective intensity modulation and direct detection (IM/DD) systems. In this Letter, we report the demonstration of the single-lane 128-GBaud probabilistically shaped (PS)-PAM-20 IM/DD transmission using only a single digital-to-analog converter (DAC) for a net 400 G/λ system. Based on the advanced digital signal processing (DSP), we achieve net bitrates of up to 437 Gb/s for optical back-to-back and 432 Gb/s after the 0.5-km SSMF transmission in the C-band with 128-Gbaud PS-PAM-20 signals. This work is the latest demonstration on ultra-high-order PS-PAM signals achieving net bitrates exceeding 400 Gb/s despite symbol rate limitations. Notably, to the best of our knowledge, the realized net information rate ([net bitrate]/[symbol rate]) of 3.37 marks a new achievement within the domain of 400 G/λ IM/DD systems, with promising implications for enhancing bandwidth efficiency in the upcoming 1.6-Tb Ethernet scenario.

1 January 2024 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
AYAn Yan
An Yan
SXSizhe Xing
Sizhe Xing
ZLZhongya Li
Zhongya Li
GLGuoqiang Li
Guoqiang Li
ASAolong Sun
Aolong Sun
Junwen ZhangJunwen Zhang
Junwen Zhang
High-speed optical transmission systems suffer from severe intersymbol-interference (ISI) caused by limited bandwidth. To address this challenge, previous studies on bandwidth limited signals have explored the use of a post filter after full-response equalization to whiten colored noise and enhance system performance. However, the post filter requires additional training or scanning processes to the appropriate coefficient values, which introduces additional overhead and time consumption. A low-complexity duobinary neural network equalization (DB-NNE) has been investigated recently, which is trained with the target of the duobinary version of the original symbol. Although this approach achieves both channel equalization and noise suppression, it may not achieve the optimal coefficient value for noise suppression. In this research, we propose an adaptive partial-response neural network equalization (APR-NNE) for bandwidth-limited signal processing and nonlinearity mitigation. Our approach seamlessly integrates channel equalization and noise suppression, achieving an optimal balance between these two functions. To verify the effectiveness of the proposed scheme, we experimentally demonstrate the transmission of beyond-150-GBaud PAM-4 signals in a system with -10-dB bandwidth of 57 GHz. The experimental results show that the APR-NNE can compensate the bandwidth-limitation induced ISI effectively, enabling the achievement of the 7% HD-FEC threshold for 155-GBaud PAM-4 signals over a 0.5-km SSMF in C-band.