Key Laboratory for Information Science of Electromagnetic Waves (MoE), Shanghai Engineering Research Center of LEO Satellite Communication and Applications, Shanghai Collaborative Innovation Center of LEO Satellite Communication Technology, Department of Communication Science and Engineering, Fudan University, Shanghai, China
Auto-generated profile, based on publicly available information
Sizhe Xing
Key Laboratory for Information Science of Electromagnetic Waves (MoE), Shanghai Engineering Research Center of LEO Satellite Communication and Applications, Shanghai Collaborative Innovation Center of LEO Satellite Communication Technology, Department of Communication Science and Engineering, Fudan University, Shanghai, China
Coherent passive optical network (PON) has been proposed to support the next generation high-speed optical access network owing to the superior receiver sensitivity and thereby the extended power budget for 100 G-and-beyond. In addition, PON's flexibility and adaptability are gaining increasing interest. Flexible PON is believed to be a powerful solution in optimizing the overall capacity based on the available channel conditions, i.e., the optical path loss (OPL) and the associated signal-to-noise ratio and nonlinearity impairments of the different groups of optical network units. In this study, we demonstrate the rate-flexible coherent TDM-PON in burst-mode based on probabilistic-shaping (PS) QAM modulations and local oscillator (LO) power adjustment technology, achieving a 300G peak rate and ultra-wide dynamic range. The principle, the burst-mode frame generation as well as the burst-mode signal processing are discussed in detail. To indicate the overall performance of achievable capacity and flexibility, a new metric, namely, dynamic-range and net-rate product ( DRNRP ) is introduced as the indicator to show the optimized throughput. Finally, we experimentally demonstrated a flexible coherent TDM-PON in burst-mode based on 25-GBaud PS-QAMs with the dynamic range of >35-dB in back-to-back. A record DRNRP up to 7,104 dB·Gbps was achieved in the current system with net data rate varying from 255-Gbits/s to 85-Gbits/s as the OPL varies over 20-km fiber transmission.
20 February 2025 in IEEE Journal on Selected Areas in Communications
Coherent detection has emerged as a key technology for advancing passive optical networks (PON) beyond 100 Gbps per wavelength, due to its advantages over the intensity and direct-detection (IM/DD) approach, which was previously dominant in PON systems. In coherent PON architectures, the cost of the optical network unit (ONU) is substantial due to the complexity of its transceivers. Consequently, numerous studies have focused on simplifying the transmitters and receivers on the ONU side. Yet, simplifying the ONU transceiver introduces issues like reduced dynamic range and lower data rates. How to make a balance between the performance and the cost, particularly in terms of component complexity, represents a critical challenge for the advancement of coherent PON. Therefore, we propose and demonstrate a hybrid, multi-format, and flexible-rate bidirectional coherent PON system, supporting a compatible OLT and ONUs with different types of transceivers. ONUs are categorized into different tiers based on their performance and cost requirements, with transceivers of varying complexity allocated accordingly. As a demonstration of concept, we have successfully conducted experimental transmissions of 25-GBaud 4/16/64- quadrature-amplitude-modulation signals across 20-km fiber in a bidirectional setup, achieving data rates ranging from 50-Gbps to 300-Gbps. The low-end, middle-end, and high-end ONUs attain power budgets of 39/31/21 dB, 43/36/26 dB, and 40/33/23 dB, respectively. This architecture serves as an effective bridge from the current 50G IM/DD PON to the anticipated 200G coherent PON, meeting the varied requirements of users at different service levels.
25 October 2022 in Journal of Lightwave Technology
Coherent technology is a promising solution for future 100-Gb/s and even 200-Gb/s single-wavelength time-division multiplexing passive optical network (TDM-PON) systems. One of the key issues for coherent TDM-PON is the upstream burst-mode amplification. The limited resolution of the analog-to-digital converter (ADC) makes it challenging to detect burst signals with widely varying power levels. Local oscillator (LO) power adjustment is a promising solution to this problem. In the present study, we verified the feasibility of LO power adjustment for adaptive amplification in a 200-G coherent TDM-PON system. We investigated the overall performance of the system under different implementation conditions, such as ADC sampling scales, TIA MGC mode control voltages, LO optical power levels, and the received optical power (ROP). Simulation and experimental results indicated that LO power adjustment can widen the dynamic range of the coherent PON system. As a proof of concept, we tested the system performance with continuous-mode signals and signals of isolated patterns with a burst-mode data frame. The dynamic range was extended to >30 dB via LO power adjustment, with 38- and 37-dB power budgets for 200-Gb/s/λ coherent TDM-PON continuous signals and signals of isolated patterns, respectively, after a 50-km standard single-mode fiber (SSMF).
5 April 2024 in Journal of Optical Communications and Networking
Emerging services such as 8K/16K high-quality video streaming, virtual reality/augmented reality, beyond-5G mobile Internet, and edge computing are driving the need for even higher speed, capacity, and flexibility in optical access networks. Coherent passive optical networks (CPONs) have garnered significant attention in recent years due to their superior receiver sensitivity and high flexibility for 100G speeds and beyond. Research interest has surged in flexible, multi-dimensional multiplexing schemes that go beyond traditional time-division multiplexing (TDM). To further leverage the flexibility offered by CPONs, this paper proposes and experimentally demonstrates what we believe to be a novel three-dimensional flexible coherent PON (3D FLCS-CPON) for downstream applications. This system offers resource-allocation capabilities in the time, frequency, and power domains. By utilizing digital subcarrier multiplexing and power allocation in both the time and frequency domains, we achieve more flexible and adaptable access rates compared to traditional TDM and frequency-division multiplexing (FDM). We present in detail the operating principles of 3D FLCS-CPON in the downstream, along with steps for power calibration between subcarriers. As a proof of concept, we demonstrate the feasibility of 3D FLCS-CPON in the downstream using four subcarriers, achieving a peak data rate of 250Gb/s/λ over a 20-km fiber.
11 December 2023 in Journal of Lightwave Technology
In high-speed optical communication systems, inter-symbol interferences (ISIs) and nonlinear distortions can occur due to the bandwidth limitations and nonlinear responses of optical and electrical components at the transceiver. To address these issues, this paper proposes the use of Bahl, Cocke, Jelinek and Raviv (BCJR) algorithm based on nonlinear channel models, such as the Volterra nonlinear filter and lookup table (LUT). Additionally, we introduce an ultra-low complexity BCJR algorithm, referred to as states-truncated BCJR based on reduced-size LUT (RLUT-ST-BCJR), to mitigate the impact of bandwidth limitations and nonlinear distortions. The RLUT-ST-BCJR uses a pruned LUT as the channel model emulator to assist in the calculation of the transition metric. Only the states with probabilities greater than a set threshold are retained in the decoding process, resulting in significantly reduced computational complexity. The experimental results confirm the improvement of both BER and normalized general mutual information (NGMI) performance using the proposed RLUT-ST-BCJR algorithm, compared to the conventional linear BCJR equalization. With this approach, we successfully transmit a 100-GBaud PAM-8 signal in both back-to-back and 1-km fiber cases, under the BER threshold of 2.4E-2 assuming 20% overhead soft-decision forward error correction.
High-speed optical transmission systems suffer from severe intersymbol-interference (ISI) caused by limited bandwidth. To address this challenge, previous studies on bandwidth limited signals have explored the use of a post filter after full-response equalization to whiten colored noise and enhance system performance. However, the post filter requires additional training or scanning processes to the appropriate coefficient values, which introduces additional overhead and time consumption. A low-complexity duobinary neural network equalization (DB-NNE) has been investigated recently, which is trained with the target of the duobinary version of the original symbol. Although this approach achieves both channel equalization and noise suppression, it may not achieve the optimal coefficient value for noise suppression. In this research, we propose an adaptive partial-response neural network equalization (APR-NNE) for bandwidth-limited signal processing and nonlinearity mitigation. Our approach seamlessly integrates channel equalization and noise suppression, achieving an optimal balance between these two functions. To verify the effectiveness of the proposed scheme, we experimentally demonstrate the transmission of beyond-150-GBaud PAM-4 signals in a system with -10-dB bandwidth of 57 GHz. The experimental results show that the APR-NNE can compensate the bandwidth-limitation induced ISI effectively, enabling the achievement of the 7% HD-FEC threshold for 155-GBaud PAM-4 signals over a 0.5-km SSMF in C-band.