Current robotic laser weeding systems mostly rely on serial mechanisms with one or two actuated axes, which can barely meet the requirements of high precision and dynamic performances. In this article, a novel laser weeding gimbal is proposed based on a two-degree-of-freedom 5-revolute rotational parallel manipulator to perform a dynamic intrarow laser weeding operation. Comprehensive analyses consisting of kinematics, workspace, singularity, and dynamics are carried out to evaluate the performance of the proposed design. Finally, experimental tests were conducted both in lab and field environments and the results are provided, in which the positioning accuracy has been evaluated as in average errors of 0.62 mm in position at the distance of 535 mm, and the dynamic weeding efficiency is around 0.72 s/weed with a dwell time of 0.64 s at the tracking speed of 0.1 m/s. The effectiveness of the proposed dynamic intrarow weeding mechanism has been evaluated in a real field trial.
20 December 2019 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
This paper presents a synthesis of a spherical parallel manipulator for a shoulder of a seven-degrees-of-freedom prosthetic human arm using a multi-objective optimization. Three design objectives are considered, namely the workspace, the dexterity, and the actuators torques. The parallel manipulator is modelled considering 13 design parameters in an optimization procedure. Due to the non-linearity of the design problem, genetic algorithms are implemented. The outcomes show that a suitable performance of the manipulator is achieved using the proposed optimization.
This research analyzes the head and chest injuries with a finite element model of Hybrid III six years old during the vehicle rollover, using a passive safety Child restraint system (CRS). Vehicle seats and passive safety systems were modeled in CAD software. Subsequently, all elements were analyzed using the finite element method in the LS-DYNA® software. The border conditions were established for each study, in accordance with the Federal Motor Vehicle Safety Standard (FMVSS), following the FMVSS 213 standard for the mounting and fastening of the infant, the FMVSS 208 for the dolly rollover test methodology with which the vehicle rollover was performed. The vehicle Toyota Yaris 2010 was considered in all the analyzes. The numerical simulations were performed during an interval of 1 s, and there were obtained values every 2 ms to analyze the efficiency of the system and the restriction performance of the CRS system. It was compared the behavior when the chair uses a 5-point seatbelt, with respect to using the 3-point seatbelt, and what happens when holding the chair with the single seatbelt and with the ISOFIX anchorage. Three cases of studies were analyzed: Study I; CRS Study II; CRS with ISOFIX anchorage; and Study III; CRS with a seatbelt of 5-points. The outcome shows that the best restriction efficiency is that of the CRS 5 points seatbelt because it presents the lowest level of chest injury. In conclusion, the main factor to reduce injuries during a rollover accident is the correct anchoring of CRS, this is achieved with ISOFIX system, on the other hand, a good quality of material and a correct thickness used for the headrest could reduce the risk of a head injury.
3 September 2018 in Applied Bionics and Biomechanics
This work presents the design of a low-cost prosthetic device for shoulder disarticulation. A proper design of the mechanisms has been addressed to obtain a prototype that presents 7 degrees of freedom. Shoulder movement is achieved by means of a spherical parallel manipulator, elbow movement is performed by a six-bar mechanism, and the wrist movement is implemented by a spherical parallel manipulator. A set of dynamic simulations was performed in order to assess the functionality of the design. The prototype was built using 3D printing techniques and implementing low-cost actuators. An experimental evaluation was carried out to characterize this device. The result of this work is a prototype that weighs 1350 g that is able to perform movements related to activities of daily living.