We demonstrate a few-mode erbium-doped fiber amplifier employing a mode-selective photonic lantern for controlling the modal content of the pump light. Amplification of six spatial modes in a 5 m long erbium-doped fiber to average power is obtained while maintaining high modal fidelity. Through mode-selective forward pumping of the two degenerate modes operating at 976 nm, differential modal gains of between all modes and signal gains of at 1550 nm are achieved. In addition, low differential modal gain for near-full C-band operation is demonstrated.
In this paper an approach to detect smoke columns from outdoor forest video sequences is proposed. The approach follows three basic steps. The first step is an image pre-processing block which resizes the image by applying a bicubic interpolation algorithm. The image is then transformed to its intensity values with a gray-scale transformation and finally the image is grouped by common areas with an image indexation. The second step consists of a smoke detection algorithm which performs a stationary wavelet transform (SWT) to remove high frequencies on horizontal, vertical, and diagonal details. The inverse SWT is then implemented and finally the image is compared to a non-smoke scene in order to determine the possible regions of interest (ROI). In order to reduce the number of false alarms, the final step of the proposed approach consists on a smoke verification algorithm, which determines whether the ROI is increasing its area or not. These results are combined to reach a final decision for detecting a smoke column on a sequence of static images from an outdoor video. Experimental results show that multi-resolution wavelet analysis is more accurate than the traditional low-pass filters on this application.
1 January 2000 in IEEE Transactions on Instrumentation and Measurement