HfO2-based ferroelectric (FE–HfO2) is a promising material for low-power and high-capacity memory technology. Since thinner ferroelectric films are required for low voltage operation, the impact of film thickness on the switching kinetics of FE–HfO2 needs to be studied in detail. In this paper, metal/ferroelectric/metal capacitors are fabricated with several thicknesses of HfZrO2 (HZO) films and characterized to study the switching kinetics based on the nucleation limited switching (NLS) model. Thinner HZO capacitors show slower polarization switching and asymmetry in program and erase operation, although low-frequency polarization charge density is nearly the same for all thicknesses. Slow switching is due to the large variability of the activation field of FE domains and grain boundaries among small FE grains. The asymmetry is caused by the asymmetric interface property at the top and bottom interfaces. High-resolution TEM and electron diffraction mapping methods provide physical evidence for the above discussions.
25 January 2024 in ACS Applied Electronic Materials
This work systematically demonstrates a novel recovery scheme for metal–ferroelectric–insulator–semiconductor (MFIS) ferroelectric field-effect transistor (FeFET) memory arrays involving device fabrication, memory operation, and circuit integration. For the first time, the timing to initiate recovery to prolong the endurance of FeFETs is studied. A 100-ns fast-unipolar pulsing (FUP) recovery treatment at optimized timing is exhibited, significantly extending endurance cycles by a factor of $10^{{2}}$ , together with a nearly zero loss (0.02%) in memory window (MW) per recovery period and a reduced MW fluctuation. An ultralow recovery-induced time loss ratio of $5\times 10^{-{5}}$ % is achieved. Based on the developed scheme, we propose a self-tracking recovery circuit design utilizing current-mode memory sensing to monitor the degree of fatigue and automatically trigger the recovery operation.
This work demonstrates the first electrical characterization of yttrium-doped Hf0.5Zr0.5O2-based ferroelectric capacitors (Y-HZO caps) at cryogenic temperatures down to 4 K, highlighting their superior endurance and reliability. Owing to a decrease in oxygen vacancy (O-vacancy) distribution and less domain pinning (due to reduced trapping) at cryogenic temperatures, the fast pulse characterization reveals 2Pr ~ 20 μC/cm2 of Y-HZO caps at 4 K, showing >33% improvement compared to results at 300 K. Notably, the Y-HZO caps show fatigue-free endurance up to 1012 cycles at 4 K, while undoped Hf0.5Zr0.5O2 ferroelectric capacitors (HZO caps) exhibit slight fatigue. Both capacitors (caps) show imprint immunity and long retention (>105 s). A key observation is that while HZO caps do not require wake-up at 4 K, Y-HZO caps show an anti-ferroelectric behavior, implying wake-up operation cannot be performed in Y-HZO caps at 4 K. The Y-HZO caps must be woken up at 300 K before further electrical analysis at 4 K. These findings point towards the reduced mobility of charged defects and O-vacancies significantly suppressing the domain de-pinning process at 4 K, which plays an essential part in the wake-up and fatigue of these ferroelectric capacitors. The time-dependent dielectric breakdown (TDDB) analysis also points towards improved reliability of both the caps at 4 K. These improved characteristics and reliability of Y-HZO caps make them an attractive choice for cryogenic memory applications like quantum and neuromorphic computing.
31 August 2023 in IEEE Journal of the Electron Devices Society
This work reports an ingenious hybrid thinfilm transistor (TFT) process platform that allows monolithic integration of poly-Si and oxide-semiconductor (OS) TFT-based circuits using three-mask processes. The effectiveness of the proposed fabrication approach is demonstrated by a hybrid poly-Si/indium-gallium-zinc oxide (IGZO) TFT cell, in which source/drain (S/D) contacts of poly-Si TFTs were simultaneously formed during the fabrication of IGZO TFTs. A thin Ti layer is intentionally inserted between poly-Si and IGZO channels in order to improve the contact resistivity of the n+ poly-Si/IGZO structure. The integrated poly-Si/IGZO TFT cells exhibit sharp transition slopes (~ -35 mV/dec) in the transfer curves. With this feature, the sensitivity of the proposed hybrid TFT cells is greatly improved in comparison to individual IGZO TFTs, as evidenced in the detection measurements of NO2 gas.
1 April 2024 in ECS Journal of Solid State Science and Technology
This work explores the characteristics of ferroelectric thin-film transistors (FeTFTs) utilizing an asymmetric dual-gate (DG) structure in both single-gate (SG) and DG operation modes. In the transfer characteristics, DG mode exhibits a memory window (MW) of 1.075 V, smaller than SG mode’s MW of 1.402 V, attributed to the back-gate bias effect causing a reduction in the device’s threshold voltage. However, DG mode demonstrates superior endurance characteristics with 106 cycles compared to SG mode’s 105 cycles. Additionally, the increase in erase pulse voltage (VERS) exacerbates the polycrystalline-silicon channel lattice damage of FeTFT, resulting in subthreshold swing (SS) degradation. Nevertheless, the extent of SS degradation from DG mode operation is significantly lower than that of SG mode, contributing to the superior endurance of DG mode. The elevation of program pulse voltage (VPRG) induces imprint and charge-trapping effects in the top-gate ferroelectric dielectric, leading to reduced endurance. Due to the use of SiO2 as the back-gate dielectric in FeTFT, DG mode exhibits lower impacts of charge-trapping effects from the top-gate ferroelectric dielectric layer, resulting in better endurance compared to SG mode. The asymmetric DG structure provides greater tolerance in the selection of VPRG and VERS.