Hang Shu

Hang Shu

Auto-generated profile, based on publicly available information

Hang Shu

Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, Towne Building Room 229, 220 S 33rd St, Philadelphia, Pennsylvania, 19104-6243, UNITED STATES

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 July 2023 in Science Advances
Verified
Journal Article
Open access
QHQiguang He
Qiguang He
RYRui Yin
Rui Yin
YHYucong Hua
Yucong Hua
WJWeijian Jiao
Weijian Jiao
CMChengyang Mo
Chengyang Mo
JRJordan R. Raney
Jordan R. Raney
Robots typically interact with their environments via feedback loops consisting of electronic sensors, microcontrollers, and actuators, which can be bulky and complex. Researchers have sought new strategies for achieving autonomous sensing and control in next-generation soft robots. We describe here an electronics-free approach for autonomous control of soft robots, whose compositional and structural features embody the sensing, control, and actuation feedback loop of their soft bodies. Specifically, we design multiple modular control units that are regulated by responsive materials such as liquid crystal elastomers. These modules enable the robot to sense and respond to different external stimuli (light, heat, and solvents), causing autonomous changes to the robot’s trajectory. By combining multiple types of control modules, complex responses can be achieved, such as logical evaluations that require multiple events to occur in the environment before an action is performed. This framework for embodied control offers a new strategy toward autonomous soft robots that operate in uncertain or dynamic environments.

31 July 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
HYH. Yasuda
H. Yasuda
HSH. Shu
H. Shu
WJWeijian Jiao
Weijian Jiao
VTV. Tournat
V. Tournat
JRJ. R. Raney
J. R. Raney
In this work, we show that collisions of one type of nonlinear wave can lead to generation of a different kind of nonlinear wave. Specifically, we demonstrate the formation of topological solitons (or transition waves) via collisions of elastic vector solitons, another type of nonlinear wave, in a multistable mechanical system with coupling between translational and rotational degrees of freedom. We experimentally observe the nucleation of a phase transformation arising from colliding waves, and we numerically investigate head-on and overtaking collisions of solitary waves with vectorial properties (i.e., elastic vector solitons). Unlike KdV-type solitons, which maintain their shape despite collisions, our system shows that collisions of two vector solitons can cause nucleation of a new phase via annihilation of the vector solitons, triggering the propagation of transition waves. The propagation of these depends both on the amount of energy carried by the vector solitons and on their respective rotational directions. The observation of the initiation of transition waves with collisions of vector solitons in multistable mechanical systems is an unexplored area of fundamental nonlinear wave interactions and could also prove useful in applications involving reconfigurable structures.

1 January 2019 in MethodsX
Verified
Journal Article
Open access
HSHang Shu
Hang Shu
CYChongxian Yin
Chongxian Yin
HZHaiyang Zhang
Haiyang Zhang
Ming LiuMing Liu
Ming Liu
MZMan-Zhou Zhang
Man-Zhou Zhang
MMMichael Farley Moyers
Michael Farley Moyers
The Shanghai Advanced Proton Therapy facility (SAPT) is a hospital-based facility that began construction in December of 2014 with commissioning of the first scanned proton beam line starting in October of 2017. Proton beams are extracted from a synchrotron accelerator with energies between 70 and 235 MeV. Beam delivery uses the modulated scanning and energy stacking techniques to produce a maximal scanning area of 40 × 30 cm2 at the iso-center. Prior to clinical use, the beam delivery system was characterized and calibrated following the guidelines of the IEC 62667 medical electronic equipment standard including the spot size in air, spot position, depth dose distributions, and lateral dose profiles, as well as the beam monitor calibrations following the IAEA TRS-398 recommendations with small differences. •The measured dosimetric results showed that the full width at half maximum (FWHM) for the beam spot size in air varied approximately from 6 mm to 13 mm. The dose fall-off (DDF) derived from the measured depth dose in water varied from 4.7 mm at 235 MeV to 0.7 mm at 70 MeV. The homogeneity of the scanned field was better than 2% for various energies as expected.•Furthermore, the beam reproducibility and proportionality delivery accuracy was also stable with the results better than 0.1% and 1% respectively. Finally, the dose monitor calibration factor, its reproducibility and stability were tested. Reproducibility tests exhibited a standard deviation (SD) result of less than 1% during the test period.•All the measured dosimetric parameters showed that the design specifications were well achieved and the results are suitable for being used as a part of the clinical commissioning and quality assurance program for treating patients.

3 July 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
BDBolei Deng
Bolei Deng
HSHang Shu
Hang Shu
JLJian Li
Jian Li
CMChengyang Mo
Chengyang Mo
JRJordan R. Raney
Jordan R. Raney
KBKatia Bertoldi
Katia Bertoldi
In this Letter, we investigate the propagation of nonlinear pulses along the free surface of flexible metamaterials based on the rotating squares mechanism. While these metamaterials have previously been shown to support the propagation of elastic vector solitons through their bulk, here, we demonstrate that they can also support the stable propagation of nonlinear pulses along their free surface. Furthermore, we show that the stability of these surface pulses is higher when they minimally interact with the linear dispersive surface modes. Finally, we provide guidelines to select geometries that minimize these interactions.

6 June 2025 in Bioinspiration & Biomimetics
Verified
Journal Article
Open access
HSHang Shu
Hang Shu
YHYucong Hua
Yucong Hua
WJWeijian Jiao
Weijian Jiao
JRJordan R Raney
Jordan R Raney
In this work, we study the nonlinear dynamics of tail motion using numerical simulations and experiments. Our simulations are based on a discrete model comprising rigid cylinders (representing vertebrae) coupled by longitudinal, shear, and bending springs (representing tissues). We consider how various parameter combinations, such as geometric and stiffness gradients in the tail, affect the dynamic response of tails subjected to impulse loading. Using numerical and experimental approaches, we quantify pulse propagation in tails, demonstrating that flexible tails can support a stable wavefront. By incorporating a gradient that gradually decreases the length of each vertebra (geometric gradient) and the stiffness of its connecting tissues (stiffness gradient), we significantly enhance the lateral displacement and velocity of the propagating pulse towards the tip. We show that this effect can be used to improve stability of robotic vehicles subjected to impulses.

17 October 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
HSHang Shu
Hang Shu
DZDelin Zhang
Delin Zhang
VHValerie Hayez
Valerie Hayez
LMLiangkai Ma
Liangkai Ma
BBBhadriraju Venkata Naga Sai Bhadriraju
Bhadriraju Venkata Naga Sai Bhadriraju
JKJon Kimberlain
Jon Kimberlain
Silicone materials are widely used in a variety of engineering applications because they can undergo large elastic deformations without loss of functionality while maintaining performance across a broad range of operating conditions. Their mechanical response often exhibits both hyperelastic and viscoelastic behavior. However, identifying an appropriate constitutive model and calibrating the associated material parameters for structural finite element analysis remain largely manual, time-consuming, and expertise-dependent tasks. To address this challenge, this work presents a physics-informed neural network (PINN)-based framework for automated constitutive model identification and parameter calibration. The proposed approach considers multiple loading modes, including uniaxial, biaxial, and planar tension, and incorporates strain-rate dependence through a time-dependent Prony series formulation. The framework is validated using experimental datasets spanning different loading conditions and strain rates. The results show that the PINN can accurately identify the most suitable constitutive model and its corresponding material parameters for each dataset. This automated capability has the potential to accelerate modeling workflows by the rapid generation of computer-aided engineering material cards for materials exhibiting hyperelastic and viscoelastic characteristics.