1 May 2005 in International Journal of Bifurcation and Chaos
2 June 2009 in IEEE Transactions on Circuits and Systems I: Regular Papers
A single-inductor two-input two-output power electronic dc-dc converter can be used to regulate two generally nonsymmetric positive and negative outputs by means of a pulsewidth modulation with a double voltage feedback. This paper studies the dynamic behavior of this system. First, the operation modes and the steady-state properties of the converter are addressed, and, then, a stability analysis that includes both the power stage and control parameters is carried out. Different bifurcations are determined from the averaged model and from the discrete-time model. The Routh-Hurwitz criterion is used to obtain the stability regions of the averaged (slow-scale) dynamics in the design parameter space, and a discrete-time approach is used to obtain more accurate results and to detect possible (fast-scale) subharmonic oscillations. Experimental measurements were taken from a system prototype to confirm the analytical results and numerical simulations. Some possible nonsmooth bifurcations due to the change in the switching patterns are also illustrated.
1 February 2003 in International Journal of Bifurcation and Chaos
7 September 2011 in IET Power Electronics
In this paper, continuous conduction mode (CCM) operation of a class of single inductor multiple output dc-dc converters is proposed. The power stage combines boost and buck-boost structures loading non-inverted and inverted outputs. The control strategy is based on current mode control under an interleaving scheme, in which each output is controlled by a specific channel. These channels use different dynamic references, which are obtained from a set of proportional-integral (PI) controllers associated to the voltage outputs. The dynamical behaviour of this system is described by means of a large signal averaged model and direct simulations of the switched circuit-based model. Small signal stability analysis of the slow scale dynamics is also carried out by using the averaged model. Finally, some experimental results are provided to validate the theoretical predictions and the numerical simulations.
1 June 2006 in Mathematics and Computers in Simulation
1 January 2009 in SIAM Journal on Applied Dynamical Systems
This paper is concerned with the analysis of two-parameter bifurcation phenomena in the buck power converter. It is shown that the complex dynamics of the converter can be unfolded by considering higher codimension bifurcation points in two-parameter space. Specifically, standard smooth bifurcations are shown to merge with discontinuity-induced bifurcation (DIB) curves, giving rise to intricate bifurcation scenarios. The analytical results are compared with those obtained numerically, showing excellent agreement between the analytical predictions and the numerical observations. The existence of these two-parameter bifurcation phenomena involving DIBs and smooth bifurcations, predicted in [P. Kowalczyk et al., Internat. J. Bifur. Chaos Appl. Sci. Engrg., 16 (2006), pp. 601–629; A. Colombo and F. Dercole, SIAM J. Appl. Dyn. Syst., submitted], is confirmed in this important class of systems.