18 November 2021 in IEEE Transactions on Instrumentation and Measurement
Radio frequency identification (RFID) is one of the major wireless communication technologies and has been applied in the supply chain and retail network for a long time. By contrast, the application of RFID in localization emerges in recent years. Besides, neither precision nor real time of existing RFID localization methods is satisfactory enough. In this article, we propose a novel method called HyLoc for localization of RFID tags based on the hyperbolic model. The problem to locate RFID tags is modeled as the solution of hyperbolic equations formed by synthetic aperture radar (SAR). To solve the equations quickly, the linear least-squares (LLS) algorithm is first used to find the approximate solution, and then, the estimation error is corrected by the Taylor series method for higher accuracy. Comparisons of performance with the state-of-the-art methods in SAR RFID localization are carried out through simulations and experiments. The results show that the proposed method is closer to the Cramér–Rao lower bound than the holography method at high noise level and more efficient than the ordinary nonlinear least-squares (NLS) method without loss of accuracy.
17 November 2022 in IEEE Transactions on Instrumentation and Measurement
Indoor localization systems based on radio frequency identification (RFID) technologies are widely adopted in the Internet of Things (IoT). Many of these applications prefer to obtain the relative position of the target object rather than the absolute position. Existing relative positioning methods are subject to strict trajectory constraints and cannot work under non-straight trajectories. RFID mobile localization which has high accuracy can also be utilized for relative positioning, but they require the acquisition of precise moving trajectory coordinates. To overcome these challenges, we propose a moving relative localization algorithm, TRL, based on phase profiles correlation in this paper. The intuition of TRL is that the phase of the backscattered signal has a linear mapping relationship with the distance between the reader and the antenna, so the closer the tag is to each other, the higher the correlation of their phase curves is. We use the dynamic time warping (DTW) algorithm to calculate the correlation between the phase profiles of different tags and achieve relative localization of all tags by sequentially determining their position intervals in the tag sequence. Compared to state-of-the-art solutions, TRL gives greater flexibility to antenna movement and the demand for trajectory coordinates, and is fully robust to trajectory error. A series of experimental results show that TRL has significant advantages over current state-of-the-art schemes in terms of both accuracy and computation time.
28 August 2023 in IEEE Transactions on Instrumentation and Measurement
RFID-based sensing technology has recently gained extensive attention in numerous applications. However, contactless sensing still faces significant challenges. The existing works are generally limited by backscattered signals of phase and the received signal strength (RSS) as intuitive combination of feature parameters. In this paper, DIMAR, an algorithm leveraging moving tag is presented to enable contactless identification of dielectric materials by determining the dielectric constant using a UHF RFID system. In this framework, by blocking the line-of-sight (LOS) link between the reader and tag, we present a theoretical analysis on the influence of material reflection on RSS from the perspective of electric fields. Then the feature model of a cost function is proposed with respect to the reflection coefficient and the complex permittivity, i.e, the relative permittivity and conductivity. Covariance Matrix Adaptation Evolution Strategy (CMA-ES) is introduced to solve the mathematical model, and Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm is used for noise reduction to deal with environmental distractions. Furthermore, due to the non-convexity of the model, we provide a geometric analysis for the convergence verification within the domain range, and further a numerical analysis to verify rationality and convergence of DBSCAN. Experiment and simulation results show that DIMAR performs superiorly in identification accuracy even in multipath environments. And since the measured materials have close proximity of the properties, DIMAR can achieve fine-grained identification resolution.
20 September 2022 in IEEE Transactions on Vehicular Technology
Exploring and developing the perception system is an important means to promote the development of intelligent transportation. In this paper, we propose RAPP, a radio tomography-based method enabling performance parameterization to achieve parameter adjustment of localization accuracy without dense deployment of passive UHF RFID devices. The reader antenna takes a rapid-moving system as the carrier and generates virtual antenna elements to inventory received signal strength (RSS) of the pre-deployed tags. To eliminate the impact of the lack of tag backward signals during the mobile process and supplement the link distribution for each segment of the monitored platform, the Cubic Spline Interpolation algorithm (CSIA) is proposed to homogenize the spacing of the virtual antenna elements by preprocessing the measurements. Then the optimized link information is adopted to perform radio tomographic imaging to recognize the locations of targets. Theoretical analysis on ill-condition is derived to analyze how the number of virtual interpolation elements affects the localization accuracy. Further derivation about the relationship between the Bayesian Cramér-Rao Bound (CRB) and the link density provides a solution to influence the localization performance through parameter adjustment. Extensive simulation and experiment show that RAPP outperforms on multiple targets localization and behaves robustly in a multipath environment.