6 June 2019 in IEEE Transactions on Industrial Informatics
The device-free localization (DFL) has promising application prospects in intrusion detection, emergency rescue and smart home, because it does not require the target to carry any auxiliary positioning equipment. Radio tomographic imaging (RTI) is one of the most potential DFL techniques and has many advantages over other methods. However, in passive ultra high frequency radio frequency identification (UHF RFID) scenario, there are few researches and many problems to be solved. The difficult but urgent matter is how to identify the locations of multiple targets from many false targets and artifacts. This paper proposes a novel method based on Cross-Sectional Scan (CSS), Gray Value Distribution Analysis (GVDA) and Naive Bayes Classifier to solve this problem. CSS obtains gray value distributions of the local maximum pixel in a RTI reconstructed image. Then, GVDA extracts several characteristic parameters from gray value distributions, such as the size, height and shape of the peak. Finally, Naive Bayes Classifier utilizes these series of characteristics to judge whether local maximum pixels are false targets or real targets. The method can also recognize the number of targets that are very close to each other. Simulation and experimental results show that this method can accurately determine the locations and the number of targets.
10 March 2021 in IEEE Transactions on Instrumentation and Measurement
Device-free localization (DFL) is playing a critical role in many applications which do not require any device attached to the target. Because of environmental changes, the fingerprint database established in the original environments is unable to remain effective when used in the changing environments. Looking at dropout as a prior-knowledge-free data augmentation operation, we propose a convolutional denoising autoencoder (DAE)-based DFL architecture AugRF. Our method combines the merits of the convolutional neural network and the DAE in which convolutional operation is beneficial to feature extraction and dropout operation is equivalent to generating augmented versions of the training data. It is noted that our method can improve the localization performance in changed environments without resampling and retraining processes. Simulations and real-world experiments verify the superiority of the proposed architecture. Our localization system can be implemented with a commercial ultrahigh-frequency radio frequency identification system. When the signal-to-noise ratio of the fingerprint data drops significantly due to environmental changes, AugRF contributes to improving localization accuracy. In addition, the time cost for one positioning meets the requirement of real-time indoor localization.
30 September 2020 in IEEE Transactions on Vehicular Technology
Device-free localization (DFL) is a hot topic in passive sensing such as intrusion detection, pose estimation and contact-tracing. To improve the performance, we propose a novel fine-grained DFL method using the phase response shift (PRS) to localize targets, which can mitigate the effect of multipath and noise without phase ambiguity. The phases of received multifrequency signals are linearly fitted as the phase response (PR). The shift of target-induced PR with respect to non-target PR is considered as the PRS. The PRSs at every location of the monitored area are observed with different length communication links and are summarized as a PRS weight model. The PRSbased radio tomography imaging (PRSRTI) localization model is derived, and utilizes the PRS and the weight model to localize targets. Experimental results validate that its performance is obviously higher than the received signal strength based radio tomography imaging (RTI).
10 September 2020 in IEEE Sensors Journal
RFID, a key enabling technology of Internet of Things (IoT), has a broad development prospect in the device-free localization (DFL). The RFID-based radio tomographic imaging (RTI) method has received great attention from scholars, owing to its properties of good real-time performance, low computational complexity, high localization accuracy. However, RTI suffers from the influence of multipath and noise, which results in the artifacts and false targets appearing in the imaging result and, in turn, decreases the positioning performance significantly, especially when there are multiple targets. Therefore, how to recognize the locations and number of true targets from the imaging result becomes an urgent problem in multi-target positioning. To solve this problem, we propose a novel scanning circle link analysis (SCLA-RTI) method to eliminate false targets and locate real targets in UHF RFID scenario. First, scanning circle method is introduced to detect the line-of-sight (LOS) links through the detecting region of the local maximum pixel in the imaging result. After feature analysis and selection of the RSS change of links, the random forest classifier is used to determine the location and number of real targets. Experiments demonstrate that SCLA-RTI method has superior performance in an indoor environment, which can accurately identify true and false targets and obtain high localization accuracy.
24 February 2022 in IEEE Sensors Journal
Many intelligent perception systems are progressively approaching people’s daily lives. Device-free localization (DFL), as a technology that can achieve positioning without the target being equipped with any equipment, has broad development prospects. RFID-based radio tomographic imaging (RTI) method has attracted much attention because of its low cost, easy deployment, and strong real-time performance. However, RTI, as a real-time imaging method that uses the line-of-sight path information and analyzes the received signal strength behavior, cannot effectively resist multipath interference. As the number of targets increases, the positioning performance using RTI method will be hit. In response to this problem, this paper proves the feasibility of applying static reflection multipath to device-free localization, and proposes a new training-free multipath enhancement (TFME-RTI) method using known spatial information. By analyzing the static multipath superposition model and target interference characteristics, a transformation model is established to take advantage of the multipath effect to enhance the positioning performance. Experiments demonstrate that the TFME-RTI method has better positioning performance and robustness in two typical indoor scenarios.
14 February 2022 in IEEE Sensors Journal
The device-free localization (DFL) can locate the target without requiring the target to carry any radio equipment, which has a broad application prospect in the field of indoor positioning. Radio frequency identification (RFID), as a key technology for IoT implementation, has been widely used in objects identification and tracking. RFID-based radio tomographic imaging (RTI) method has received extensive attention due to its low cost, excellent real-time performance and easy to deployment. However, the indoor multipath effect, which leads to unpredictable variations of the received signal strength (RSS), especially in multi-target positioning. It is still a challenging problem to recognize the locations of multiple targets effectively in the complex indoor environment. In this paper, a novel method of intersection multidimensional feature analysis is proposed to solve this problem. The target impact region is introduced to extract the effective intersections, and then the multidimensional feature information is analyzed to determine the region where the real target may exist. The location estimation of the target is obtained by assigning appropriate weights to each intersection in the region. Extensive experiments are conducted with results are demonstrating that the method achieves high localization accuracy and localization stability in different indoor scenarios, while maintaining low computational complexity.