25 October 2024 in IEEE Transactions on Electron Devices
Phase change memory (PCM) is a scalable, reliable, and robust technology for embedded and stand-alone memory device. PCM has also been extensively demonstrated for analog in-memory computing (IMC), which allows energy-efficient acceleration of AI workloads. High-temperature data retention requirements in PCM devices are met by Ge-rich GeSbTe (GST), which allows to satisfy consumer-and automotive-grade reliability specifications. However, Ge-rich GST suffers from set state drift, which affects the stability of the multilevel cell (MLC), hence the accuracy of IMC. This work presents: 1) a novel multilevel programming algorithm from weak reset state to prevent conductance instabilities; 2) a drift compensation scheme through a differential weight approach, validated on matrix-vector multiplication (MVM) after high-temperature annealing; and 3) a detailed study of the impact of PCM variability and weight quantization on hardware implementation of neural networks.
21 March 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
Optimizing the power consumption of flip-flops (FFs), as basic building blocks of sequential digital circuits, can substantially reduce the power of the whole system. This work proposes a new Robust Redundant-Free Flip-Flop (RRFF) for ultra-low-power purposes that addresses both aspects that have the potential to reduce power consumption: it has static and contention-free characteristics that provide the robustness required for supply voltage scalability down to the near-threshold region and, at the same time, it eliminates all internal redundant transitions, so that the circuit exclusively consumes dynamic energy when data changes. Measurement results from a test chip fabricated in a 65-nm CMOS technology show that the RRFF achieves 63.4% clock power reduction across a wide voltage range (0.4-1.1 V) and 15.0% power reduction at 100% activity for the same supply voltage range with minimal area overhead compared to the conventional transmission gate flip-flop (TGFF).
1 December 2021 in IEEE Access
Memristors offer the possibility of implementing multilevel cells in Resistive RAMs providing high-density non-volatile data storage solutions. However the writing and reading processes when these devices are integrated into a crossbar is a problem that has not yet been fully solved. Process and temperature variations must be carefully handled when designing reliable interface circuits for RRAM cells. In this work we present a time-domain reading circuit for multilevel RRAM cells. The sensing operation is performed based on the well-known RC circuit that generates a pulse whose width depends on the state of the cell, providing excellent results in terms of area, energy per bit and scalability. Temperature and process variations have been analysed in depth to validate the effective number of levels a cell may store to be read accurately.
1 November 2020 in Integration