State Key Laboratory of Soil Pollution control and safety, School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China
Auto-generated profile, based on publicly available information
Yang Lei
State Key Laboratory of Soil Pollution control and safety, School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, China
Phosphorus (P) is an essential nutrient for living organisms and cannot be replaced or substituted. In this paper, we present a simple yet efficient membrane free electrochemical system for P removal and recovery as calcium phosphate (CaP). This method relies on in situ formation of hydroxide ions by electro mediated water reduction at a titanium cathode surface. The in situ raised pH at the cathode provides a local environment where CaP will become highly supersaturated. Therefore, homogeneous and heterogeneous nucleation of CaP occurs near and at the cathode surface. Because of the local high pH, the P removal behavior is not sensitive to bulk solution pH and therefore, efficient P removal was observed in three studied bulk solutions with pH of 4.0 (56.1%), 8.2 (57.4%), and 10.0 (48.4%) after 24 h of reaction time. While P removal efficiencies are not generally affected by bulk solution pH, the chemical-physical properties of CaP solids collected on the cathode are still related to bulk solution pH, as confirmed by structure characterizations. High initial solution pH promotes the formation of more crystalline products with relatively high Ca/P molar ratio. The Ca/P molar ratio increases from 1.30 (pH 4.0) to 1.38 (pH 8.2) and further increases to 1.55 (pH 10.0). The formation of CaP precipitates was a typical crystallization process, with an amorphous phase formed at the initial stage which then transforms to the most stable crystal phase, hydroxyapatite, which is inferred from the increased Ca/P molar ratio from 1.38 (day 1) to the theoretical 1.76 (day 11) and by the formation of needle-like crystals. Finally, we demonstrated the efficiency of this system for real wastewater. This, together with the fact that the electrochemical method can work at low bulk pH, without dosing chemicals and a need for a separation process, highlights the potential application of the electrochemical method for P removal and recovery.
Phosphorus (P) is an essential element for the growth and reproduction of organisms. Unfortunately, the natural P cycle has been broken by the overexploitation of P ores and the associated discharge of P into water bodies, which may trigger the eutrophication of water bodies in the short term and possible P shortage soon. Consequently, technologies emerged to recover P from wastewater to mitigate pollution and exploit secondary P resources. Electrochemically induced phosphate precipitation has the merit of achieving P recovery without dosing additional chemicals via creating a localized high pH environment near the cathode. We critically reviewed the development of electrochemically induced precipitation systems toward P removal and recovery over the past ten years. We summarized and discussed the effects of pH, current density, electrode configuration, and water matrix on the performance of electrochemical systems. Next to ortho P, we identified the potential and illustrated the mechanism of electrochemical P removal and recovery from non-ortho P compounds by combined anodic or anode-mediated oxidation and cathodic reduction (precipitation). Furthermore, we assessed the economic feasibility of electrochemical methods and concluded that they are more suitable for treating acidic P-rich waste streams. Despite promising potentials and significant progress in recent years, the application of electrochemical systems toward P recovery at a larger scale requires further research and development. Future work should focus on evaluating the system's performance under long-term operation, developing an automatic process for harvesting P deposits, and performing a detailed economic and life-cycle assessment.
7 January 2014 in Industrial & Engineering Chemistry Research
To address the issues of eutrophication and the potential risk of phosphorus (P) shortage, it is essential to remove and recover P from P-containing streams to close this nutrient cycle. Electrochemical induced calcium phosphate (CaP) precipitation was shown to be an efficient method for P recovery. However, the influence of natural organic matter (NOM) is not known for this treatment. In this paper, the behavior of NOM and its effect on CaP precipitation was studied. In contrast to studies where NOM hindered CaP precipitation, results show that the interaction of NOM with CaP improves the removal of P, independent of the types of NOM. The P removal at the average increased from 43.8 ± 4.9% to 58.5 ± 1.2% in the presence of 1.0 mg L-1 NOM. Based on the yellow color of the CaP product, NOM is co-precipitated. The bulk solution pH with and without buffers has totally different effects on the precipitation process. Without buffer, CaP precipitates on the cathode surface in a wide pH range (pH 4.0-10.0). However, the precipitation process is completely inhibited when the bulk solution is buffered at pH 4.0 and 6.0. This is probably due to neutralization of OH- by the buffers. Regardless of the presence or absence of NOM and solution pH, the recovered products are mainly amorphous CaP unless the electrolysis time was increased to seven days with 4.0 A m-2, in which crystalline CaP formed. These findings advance our understanding on the interaction of Ca, P and NOM species for the application of electrochemical method for P recovery from real wastewater.