This Special Issue is dedicated to recent research in the field of compact modeling of semiconductor devices. This is the first J-EDS Special Issue on compact modeling. In the last years, a number of new semiconductor device structures, for electronic and photonic applications, have been developed. Compact models are needed for the incorporation of these new devices in integrated circuits. Therefore, a Special Issue was needed to present recent compact modeling solutions for semiconductor devices
We report a new junction leakage generation phenomenon which was found at specific junction edges on top of which poly-Si gates ran nearby in a 0.35 /spl mu/m design rule actual DRAM chip. As more advanced isolation schemes that enabled less bird's beak were applied, the phenomenon was more evident. After characterizing a set of junction leakage patterns where the relative position of poly gate to the junction edge was systematically varied, a problematic combination of process window and design rule was found and screened out of the actual circuit layout. This leakage component has to be considered to improve the refresh characteristics and stand-by current.