1 March 2019 in Materials & Design
30 August 2015 in Journal of Medical Systems
28 April 2017 in IEEE Sensors Journal
Standard microphones and ultrasonic devices are generally designed with a static and flat frequency response in order to address multiple acoustic applications. However, they may not be flexible or adaptable enough to deal with some requirements. For instance, when operated in noisy environments such devices may be vulnerable to wideband background noise which will require further signal processing techniques to remove it, generally relying on digital processor units. In this work, we consider if microphones and ultrasonic devices could be designed to be sensitive only at selected frequencies of interest, whilst also providing flexibility in order to adapt to different signals of interest and to deal with environmental demands. This research exploits the concept where the “transducer becomes part of the signal processing chain” by exploring feedback processes between mechanical and electrical mechanisms that together can enhance peripheral sound processing. This capability is present within a biological acoustic system, namely in the ears of certain moths. That was used as the model of inspiration for a smart acoustic sensor system which provides dynamic adaptation of its frequency response with amplitude and time dependency according to the input signal of interest.
30 October 2019 in IEEE Sensors Journal
In recent years, there has been increasing interest in using additive manufacturing (3D printing) technology to fabricate sensors and actuators due to rapid prototyping, low-cost manufacturing processes, customized features and the ability to create complex geometries at micrometre scale. State of the art additive manufactured acoustic and ultrasonic transducers show limitations in miniaturization, repeatability (defects) and sensitivity. This new work encompasses the development of a capacitive acoustic and ultrasonic transducer, including its fabrication process using a commercial digital light processing printer and output signal characterization with a custom-made amplification circuit. A set of capacitive-acoustic and ultrasonic transducers was fabricated and tested using different diaphragm diameters from 1.8 - 2.2 mm, for comparison, with central operating frequency between 19 - 54 kHz, respectively. This capacitive transducer design has a receiving sensitivity of up to 0.4 mV/Pa at its resonant frequency, and a comparison with a commercial reference microphone is provided.