1 March 2019 in Materials & Design
13 August 2018 in IEEE Sensors Journal
Acoustic metamaterials have recently become of interest for their ability to attenuate sound by breaking the mass-density law. In this paper, acoustic metamaterials based on Helmholtz resonators and capable of attenuating sound up to 30 dB are fabricated for sound absorption applications in the small scale. The proposed metamaterials are subwavelength at a factor of λ/12 with respect to the lateral dimension of the units. The directional response due to the position of the acoustic source on the sound attenuation provided by the metamaterial is investigated by controlling the location of a loudspeaker with a robot arm. To enhance and broaden the absorption bands, structural modifications are added such that overtones are tuned to selected frequencies and membranes are included at the base of the resonators. This design is made possible by innovative 3-D printing techniques based on stereolithography and on the use of specific UV-curable resins. These results show that these designs could be used for sound control in small-scale electroacoustic devices and sensors.
1 March 2018 in Sensors and Actuators A: Physical
Development of 3D-printed devices, sensors, and actuators has become increasingly popular in recent years due to low cost, rapid production, and device personalization. This personalization process allows the development of devices with unique physical properties and phenomena that enhance the desired properties of the 3D-printed part. Biomimetics is a technique used to develop engineered devices, as organisms present in nature can provide smart and simple solutions to complex problems across a wide range of applications. Locust ears have a simple tympanic membrane with varying thicknesses that allows acoustic frequency selection, as well as presenting nonlinear phenomena. This acoustic frequency selection assists the insect in predation and swarming. This work presents the development of a piezoelectric polymeric material that has been used to 3D-print a new frequency selective piezoelectric sensor inspired by the locust’s tympanic membrane. Such 3D-printing of functional sensors and actuators provides an insight into the development and enhancement of polymer-based science, with exciting and promising potential for the near future
1 December 2017 in Physics of Fluids
Rayleigh surface acoustic waves (SAWs), generated on piezoelectric substrates, can interact with liquids to generate fast streaming flows. Although studied extensively, mainly phenomenologically, the effect of the SAW frequency on streaming in fluids in constrained volumes is not fully understood, resulting in sub-optimal correlations between models and experimental observations. Using microfluidic structures to reproducibly define the fluid volume, we use recent advances modeling the body force generated by SAWs to develop a deeper understanding of the effect of acoustic frequency on the magnitude of streaming flows. We implement this as a new predictive tool using a finite element model of fluid motion to establish optimized conditions for streaming. The model is corroborated experimentally over a range of different acoustic excitation frequencies enabling us to validate a design tool, linking microfluidic channel dimensions with frequencies and streaming efficiencies. We show that in typical microfluidic chambers, the length and height of the chamber are critical in determining the optimum frequency, with smaller geometries requiring higher frequencies.
31 July 2018 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Piezoelectric micromachined ultrasonic transducers (PMUTs) are used to receive and transmit ultrasonic signals in industrial and biomedical applications. This type of transducer can be miniaturized and integrated with electronic systems since each element is small and the power requirements are low. The bandwidth of the PMUT may be narrow in some conventional designs; however, it is possible to apply modified structures to enhance this. This paper presents a methodology for improving the bandwidth of air-coupled PMUTs without sensitivity loss by connecting a number of resonating pipes of various lengths to a cavity. A prototype piezoelectric diaphragm ultrasonic transducer is presented to prove the theory. This novel device was fabricated by additive manufacturing (3-D printing), and consists of a polyvinylidene fluoride thin film over a stereolithography designed backplate. The backplate design is inspired by a pipe organ musical instrument, where the resonant frequency (pitch) of each pipe is mainly determined by its length. The −6-dB bandwidth of the “pipe organ” air-coupled transducer is 55.7% and 58.5% in transmitting and receiving modes, respectively, which is ~5 times wider than a custom-built standard device.
5 August 2019 in IEEE Sensors Journal
This paper presents a 3D printing technique based on stereolithography and direct light processing for the fabrication of low resonance frequency thin plates suitable for acoustic metamaterials applications. It was possible to achieve a better resolution with respect to other 3D printing methods such as fusion deposition modeling and to obtain plates with a thickness of 70 μm. The plates were characterized using three different methods: laser Doppler vibrometer supported by modal analysis, impedance tube measurements backed by a transfer matrix model and nanoindentation. All results are in good agreement. The physical parameters retrieved through the characterization methods can be used for future designs and integrated into finite element analysis to better predict the noise impact of these materials. Thanks to the small radius and thickness of the plates presented in this paper and to their low resonance frequency, it is suggested that they could be arranged in various configurations and used as unit cells in acoustic metamaterials applications for noise attenuation in small-scale electroacoustic devices.