9 October 2024 in IEEE Transactions on Power Electronics
A new high-power two-port multiple-frequency LLLC induction heating power system is proposed in this article, which can simultaneously achieve multiple-frequency, multiple-power, and high-efficiency output. A two-port LLLC resonant tank with an inverter at each port is used to power the load. The multiplication of output power and frequency is achieved by coordinating the operating modes of the two inverters. In order to improve the efficiency of the system, a design methodology for tank parameters is proposed, ensuring that the system operates at the optimum point of efficiency, thereby avoiding reactive power losses and realizing zero voltage switching (ZVS). Additionally, an adjusted-pulse density modulation (PDM) (APDM) control method is proposed, which can further enhance the efficiency of PDM control. The shortcomings, such as large current fluctuation and the tendency to lose lock, are optimized, allowing the system to operate with high efficiency across the full power range. Finally, an experimental prototype (SiC mosfet ) is developed to verify the feasibility of the topology, parameter design methodology, and APDM.
27 November 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Given the high power requirements of commercial automatic cooking machines, a comprehensive all-metal induction heating power system with an energy storage port is proposed. The energy storage port serves to peak-shave the Induction Heating (IH) system and utilizes time-of-use electricity pricing to save costs. While domestic induction heating is primarily used for ferromagnetic (FM) pots, there is a challenge with non-ferromagnetic (NFM) pots due to their small equivalent resistance, which can easily cause overcurrent issues of inverter. To achieve all-metal heating, a dual-resonance topology inverter with switches is proposed. The system can utilize a half-bridge LC series resonant inverter for heating FM pots or a full-bridge LLLC resonant inverter for heating NFM pots. Compared to the LLC resonant circuit, the LLLC resonant circuit significantly reduces output impedance angle and switching losses, thereby improving system efficiency. Additionally, an APDM-PFM control strategy is proposed for heating NFM cookware. During heavy loads, an Average Pulse Density Modulation (APDM) control strategy is adopted for power regulation; while during light loads, the system switches from full-bridge (FB) resonant inverter to half-bridge (HB) resonant inverter, and the control strategy changes from APDM to Pulse Frequency Modulation (PFM). This ensures that the load current remains continuous, allowing the system to operate efficiently across the entire power range. Finally, a 5.5kW/10kHz experimental prototype was developed. The topology, the parameter design method and the control strategy were verified through this prototype.
10 September 2024 in IEEE Access
Conventional pre-synchronization control strategies for grid-connected virtual synchronous generator typically involve phase-locked loops, coordinate transformations or other non-linear computations, which may lead to substantial hardware resource consumption, pre-synchronization failures, even potential system instability. Hence, the mathematical relationships between voltage differences and angle differences on both sides before grid-connecting are analyzed. Based on those relationships, A pre-synchronization control strategy is proposed. It achieves smooth grid connection only by simple linear calculations using the filter capacitor voltage and the grid voltage. The difference between the effective values of these two voltage components is processed through a PI controller, with the result serving as a correction value for the output voltage command of the reactive power loop. The instantaneous value difference of the corresponding phase voltages is summed in absolute terms and processed through another PI controller, with the resulting output serving as a correction value for the frequency command of the active power loop. The cutoff frequencies of the two PI controllers are staggered to achieve decoupling. Control parameters are designed through stability analysis. Finally, experimental results validate the effectiveness of the proposed control strategy.
19 March 2024 in IEEE Transactions on Power Delivery
Due to the specificity of continuous casting production, the application of ac/ac MMC structure in induction heating power supply requires the realization of frequency conversion from grid AC to low and medium single-phase AC, which makes the conventional modeling methods inappropriate. In this article, an HSS-based reduced order impedance model is proposed. Firstly, due to the complexity of the internal harmonics, the harmonic attenuation of the internal signals is calculated quantitatively by analyzing the three-dimensional signal-flow graph and then the harmonic frequencies are truncated, which provide a basis for model simplification. Furthermore, to precisely describe the amplitude-phase characteristics of the ac/ac MMC under different output frequencies, the harmonic state space modeling method is improved by combining the double Fourier integral transform. Finally, the correctness of the frequency analysis and the accuracy of the reduced order model are verified.
11 June 2025 in IEEE Transactions on Power Electronics
The full-range zero voltage switching (ZVS) comprehensive control strategy is proposed for a high-power dual-port LLLC induction heating system which allows the system to operate efficiently across the entire power range. Under heavy load, a novel dual-phase-shift (DPS) control strategy is proposed in this article. Using time-domain analysis, the minimum circulating current curve and the ZVS range under DPS conditions are derived. The optimal phase-shift angle relationship is determined by combining the minimum circulating current and the full-range ZVS region. However, under DPS control, the minimum output power is one-quarter of its full load capacity due to the lack of internal phase-shift in inverter II. To overcome this limitation, a frequency-doubling pulse frequency modulation (FD-PFM) control strategy is proposed under light load. Frequency-doubling control is implemented through time-division multiplexing between the two inverters, which enables the resonance circuit frequency to be doubled without altering the switching frequency of each inverter. The FD-PFM approach facilitates a faster response to power variation with frequency, enabling the system to adjust power in a narrower frequency range. This enables smooth, wide-range power adjustment across the entire system and ensures ZVS operation across the full power range. A 14 kW prototype was developed, and the experimental results align closely with the theoretical analysis.
5 November 2024 in IEEE Transactions on Industrial Electronics
The three-level cascaded noninverting buck–boost converter (TL-CNIBBC) has various operating modes and is especially suited at wide-range voltage bidirectional conversion for energy storage. How to choose a suitable operating mode and realize smooth mode switching is the key problem to be solved. In this article, the operation principle of TL-CNIBBC is analyzed, and two extended modes based on the traditional working modes are introduced to eliminate the dead zone when the input voltage is close to the output voltage. Second, a model predictive control (MPC) with inductor current as a cost function is proposed, taking the hysteresis loop control to avoid mode jumping with mode switching rules defined to achieve multimode smooth transition. Finally, to address the capacitor voltage imbalance in three-level converter, a modification of the duty ratio is proposed. Experimental results show the proposed control strategy can select the proper working modes effectively and realize smooth mode switching.