Currently, there are existing technologies for high-temperature waste disposal, which use the resulting gas as fuel for recycling newly formed waste. However, the composition of waste is not constant, and contents of their components are different, thus, the need for fuel gas for burning is not stable. Therefore, such gas is constantly lost. Thus, the purpose of the article is to present the study results of the energy efficiency of high-temperature waste disposal technology, which includes low-temperature separation of the resulting gas mixtures, which allows accumulating fuel products. By means of numerical simulation an analysis of the functioning of energy-technological facility of separation of multicomponent hydrocarbon mixtures with the subsequent optimization of its parameters in order to improve its efficiency and decrease energy costs for waste gasification was performed. For this purpose, the classical approach and generally accepted thermodynamics relations were used, including the Peng-Robinson equation of state for the description of coefficients of heat-physical characteristics of working bodies. The complexity of calculation of multicomponent systems (with three and more components) does not allow application of the state diagrams. Thus, for the simulation of heat-physical characteristics the REFPROP program was employed. The energy efficiency of the proposed technology of energy resources production at waste utilization was shown. The amount of products obtained by the facility is equal to 5.242 kg/hour of the fuel product No. 1 with methane content of 99.98% and 54.76 kg/hour of the fuel product No. 2 with low quantity of methane. This confirms the economic efficiency of such technology of disposal.
The analytical models for calculating the performance of vehicles used to transport fertilizers have been developed. The durability of undercarriages elements is estimated with consideration of kinetic equations for determining the periods of nucleation and propagation of cracks. The formulas for determining the durability of П-shaped thin-walled sections as the sum of the periods of nucleation and subcritical growth of corrosion-fatigue cracks in metal structures of vehicles, depending on the conditions of operation, are applied as well.
In the modern systems of transportation of oil, gas and condensate, in the units of regasification of liquefied natural gas, two-phase flows play an increasingly important role in technological equipment used in the chemical and oil refining industry, power engineering and other industries. All available studies on the formation of gas hydrates were mainly focused on their ability to clog pipes along their entire length. While their ability to cause (initiate) corrosion remains virtually unexplored. Therefore, to increase the efficiency of industrial pipelines it is necessary to study the joint effect of hydration formation and stresses of friction on corrosion of the pipeline. The mathematical model of pipeline corrosion has been further developed by considering the influence of the gas hydrate. The influence of pressure, temperature on the speed of corrosion processes is estimated and it is shown that under the most unfavorable conditions the corrosion rate under the action of gas hydrates can increase several times.