The processes of supplying natural gas are accompanied by significant losses. In this regard, the complex problem of minimizing losses and improving the efficiency of energy use is very relevant. Steel pipelines for transportation of oil and gas often cross the tracks or are located parallel to the lines of electric power transmission lines of alternating current. Most dangerous from the corrosive point of view of the combination of the chemical composition of the soil electrolyte and the vagal current density were established.
Corrosion and corrosion-fatigue tests of the material of the pipeline, which was in operation for 41 years. It has been shown that prolonged operation reduces the parameters of resistance to fatigue and prolonged static loading in corrosive environments. It was established that the degradation of physical and mechanical properties is insignificant, Ukraine’s main gas pipelines are ready to operate at full capacity provided that timely monitoring measures are carried out.
In the modern systems of transportation of oil, gas and condensate, in the units of regasification of liquefied natural gas, two-phase flows play an increasingly important role in technological equipment used in the chemical and oil refining industry, power engineering and other industries. All available studies on the formation of gas hydrates were mainly focused on their ability to clog pipes along their entire length. While their ability to cause (initiate) corrosion remains virtually unexplored. Therefore, to increase the efficiency of industrial pipelines it is necessary to study the joint effect of hydration formation and stresses of friction on corrosion of the pipeline. The mathematical model of pipeline corrosion has been further developed by considering the influence of the gas hydrate. The influence of pressure, temperature on the speed of corrosion processes is estimated and it is shown that under the most unfavorable conditions the corrosion rate under the action of gas hydrates can increase several times.