Two types of thermal-diffusion-based technological routes have been realized to obtain ZnSe:Fe plates demanded for laser application in the mid-IR spectral range. For the technological routes used, the iron doping process is shown to lead to the formation of auxiliary luminescence bands including (1) luminescence of residual tetrahedral donors and acceptors; (2) unknown bound exciton line located at 459 nm; (3) broad bands with maxima at 490, 520, 670, and 820 nm; and (4) IR band at 960 nm previously assigned to centers related to transition metals. Using the measurements of photoluminescence under conditions of two-photon excitation and measurements of low-temperature microphotoluminescence, the intensity profiles of the bands have been shown to be uncorrelated with the concentration profile of the optically active ( ) iron. This trend does not depend on the technological routes used. Thus, heavily Fe doped areas, as well as adjacent regions in ZnSe:Fe plates produced by thermal-diffusion-based techniques, contain auxiliary centers governing luminescence in visible and near IR spectral ranges. These centers are not directly related to the optically active ( ) iron.
18 February 2020 in Methods and Applications in Fluorescence
Upconversion nanoparticles have attracted considerable attention as luminescent markers for bioimaging and sensing due to their capability to convert near-infrared (NIR) excitation into visible or NIR luminescence. However, the wavelength of about 970 nm is commonly used for the upconversion luminescence excitation, where the strong absorption of water is observed, which can lead to laser-induced overheating effects. One of the strategies for avoiding such laser-induced heating involves shifting the excitation into shorter wavelengths region. However, the influence of wavelength change on luminescent images quality has not been investigated yet. In this work, we compare wavelengths of 920, 940 and 970 nm for upconversion luminescence excitation in the thickness of biological tissues in terms of detected signal intensity and obtained image quality (contrast and signal-to-background ratio). Studies on biological tissue phantoms with various scattering and absorbing properties were performed to analyze the influence of optical parameters on the depth and contrast of the images obtained under 920–970 nm excitation. It was shown that at the same power the excitation wavelength shift reduces the detected signal intensity and the resulting image contrast. Visualization of biological tissue samples using shorter excitation wavelengths 920 and 940 nm also reduces signal-to-background ratio (S/B) of the obtained images. The S/B of the obtained images amounted to 2, 6 and 8 for 920, 940 and 970 nm, respectively. It was demonstrated that pulse-periodic excitation mode is preferable for obtaining high quality luminescent images of biological tissues deep layers and minimize overheating. Short pulse durations (duty cycle 20%) don’t result in heating even for 1 W cm−2 pumping power density and allow obtaining high luminescence intensity, which provides good images quality.
High-resolution transmission electron microscopy, electron diffraction, and electron energy-loss spectroscopy provide information on the structural evolution, dielectric function, and bandgap values of nanocrystalline 10 nm thick lanthanum doped hafnia (La:HfO2) layers in TiN/La:HfO2/TiN/SiO2/Si irradiated with 24, 46, 72, and 160 MeV (0.2–1.2 MeV/u) Xe ions. Swift heavy Xe ions were expected to create significant atomic rearrangements when passed through a solid losing energy mainly through electronic excitation and ionization of the target atoms. Local heating and subsequent rapid cooling in the region around the ion track can lead to re-solidification with the formation of a new stable crystalline phase, and direct crystal-to-crystal transformations are possible. The structure evolution of hafnia nanocrystals from the orthorhombic Pbcm in the pristine layer to the tetragonal P42/nmc phase in the 160 MeV Xe ion irradiated layer was observed. The mixture of tetragonal and orthorhombic phases was found in samples irradiated with ions of intermediate energies. Textured hafnia layers were formed as a result of ion irradiation. The changes in plasmon line shape and the blueshift of the plasmon energy-loss peak from 14.9 eV in the pristine layer to 15.4 eV in 46 MeV and 15.9 eV in 160 MeV Xe ion irradiated hafnia reflect structural transformations, the increase in the Hf coordination number, and crystal orientations. Valence-electron energy-loss spectroscopy measurements showed a slight increase in the bandgap value from 6.1 eV in the pristine sample to 6.2 eV and 6.3 eV in irradiated samples with 46 and 160 MeV Xe ions, respectively, and dielectric functions changed insignificantly in irradiated hafnia layers.
The method of software analysis of high-resolution TEM images using the peak pairs algorithm [Galindo P L et al 2007 Ultramicroscopy107 1186–93] in combination with Raman spectroscopy was employed to study lattice deformations in Ge/Si(001) structures with low-temperature Ge quantum dots. It was found that the stresses do not spread in a thick Si layer above quantum dots, but completely relax via the formation of a thin boundary layer of mixed composition. However, intermixing of Ge and Si is absent beneath the Ge layer in samples with a Ge coverage of 10 Å. Besides intermixing was not observed at all, both beneath and above the Ge layer, in samples with a Ge coverage of 6 Å or less. This may be due to the predominance of Ge diffusion into the Si matrix from the {105} facets of Ge huts, not from the Ge wetting layer, at low temperatures of the Ge/Si structure deposition. The critical thickness of Si coverage at which the intense stress-induced diffusion takes place is determined to lie in the range from 5 to 8 nm.