1 January 2024 in Tribology and Materials
Explosion welding is an unconventional method of joining two dissimilar metal materials, mostly used to clad dissimilar materials or when some unusual geometries need to be joined. Some of the bimetal joints obtained this way have applications in special cutting tools, transition joints, propellers and turbine blades, and therefore it is important to know the wear resistance of welded joints. In this research, explosive Demex, based on ammonium nitrate and trinitrotoluene, was used to weld plates of aluminium alloy AW-2024 and steel 1.0216. The welding procedure was carried out in the configuration of parallel plates. The quality of the welded joint was inspected on samples cut out from the welded plate by the method of microscopic analysis on the cross-section and by an ultrasonic cavitation test. Materials erosion in the zone of the welded joint after each of 4 cavitation cycles was observed using an optical microscope and by monitoring the mass loss. The wear resistance of the created bimetal was analysed from the aspects of further exploitation.
1 January 2020 in Vojnotehnicki glasnik
Introduction/purpose: When performing the explosive welding procedure, for the safety of workers, it is necessary to take into account the minimum distance between the workers and the place of explosion at the time of explosion. Negligence can cause temporary hearing loss, rupture of the eardrum and in some cases even the death of workers. The aim of this paper is to determine the critical distance based on the mass of explosive charge required for explosive welding, provided that the limit pressure is 6.9 kPa in the case of temporary hearing loss and 35 kPa in the case of eardrum rupture. This paper does not take into account other effects of the explosion than those caused by the shock wave. Methods: Depending on the type of explosion, the equivalent explosive mass was calculated. Based on the equivalent explosive mass and the limit pressure, the minimum distances were calculated using the Sadovsky and Kingery-Bulmash equations. Results: The corresponding tables show the results of the calculation of the critical distance of workers from the place of the explosion when there may be temporary hearing loss or rupture of the eardrum. The calculated value of the critical explosion distance by the Kingery-Bulmash method, under the condition of the maximum pressure for temporary hearing loss, is 5.62% lower than the distance value obtained by the Sadovsky method while the value of the critical explosion distance calculated by the Kingery-Bulmash method, under the condition of the maximum pressure for eardrum rupture, is 7.83% lower than the value obtained by the Sadovsky method. Conclusion: The results of the calculation showed that the critical distance from the explosion can be successfully calculated and that the obtained values have small differences depending on the applied calculation method.
17 August 2021 in International Journal for Quality Research
1 January 2026 in Tehnika
BSBratislav N. Stojiljković
Bratislav N. Stojiljković
Among the numerous artifacts in the scientist's legacy in the Nikola Tesla Museum in Belgrade there are sketches of original conceptual solutions, technical drawings, patent documentation, several sheets of handwritten calculations related to the design of a new fountain model (engine characteristics, fluid flow parameters, dimensions of structural elements), as well as other archival material that testifies to his work on this invention. This research aims to analyze the preserved technical and other archival documents related to the development of several different conceptual solutions of the fountain model for which Tesla, in cooperation with his lawyers, prepared and submitted an application to the Patent Office of the United States of America at the end of October 1913 and for which he was granted US patent No. 1,113,716. We reviewed all the modifications to the construction of the imagined models of the new fountain, which were carried out during the entire development process, from the initial idea to the final patented solutions. To that end, we also made computer models based on original technical and patent documentation.