Permanent geoelectrical monitoring, using the GEOMON4D instrumentation in combination with high resolution displacement monitoring by means of the D.M.S. system, was performed at two active landslide areas: Ampflwang/Hausruck in Austria, and Bagnaschino in Italy. These sites are part of the Austrian geoelectrical monitoring network, which currently comprises six permanently monitored landslides in Europe. Within the observation intervals, several displacement events, triggered by intense precipitation, were monitored and analysed. All of these events were preceded by a decrease of electric resistivity. The application of an innovative 4D inversion algorithm made it possible to investigate the potential processes which led to the triggering of these events. We conclude that resistivity monitoring can significantly help in the investigation of the causes of landslide reactivation. Since the results also contribute to the extrapolation of local displacement monitoring data to a larger scale, resistivity monitoring can definitely support decision‐finding in emergencies.
1 January 2002 in Physics and Chemistry of the Earth, Parts A/B/C
Complex flow-like landslides (CFLLs) are important geomorphic agents of Late Quaternary mountain evolution in the Flysch Belt of the Outer Western Carpathians. The CFLLs are characterised by the upper section of deep-seated, retrogressive landslide of structurally unfavourably oriented rocks and lower sections composed of earthflows originated due to liquefaction of material accumulated from the upper slopes. Radiocarbon dating of organic matter incorporated into landslide debris or related deposits suggests that most of the CFLLs collapsed repeatedly throughout the Holocene with typical recurrence intervals of approximately 1–2 ka. Catastrophic landslides that occurred during extreme hydrometeorological events in recent decades displayed evidence of Holocene activity. Most of the CFLLs dammed and steepened adjacent valleys. Our chronological dataset is biased by erosion of older landforms, but most of the dated reactivations correlate to regional increases in humidity identified by previous paleoenvironmetal studies.
5 October 2004 in Natural Hazards and Earth System Sciences
Deep-seated mass movements currently comprise one of the main morphogenetic processes in the Flysch Belt of the Western Carpathians of Central Europe. These mass movements result in a large spectrum of slope failures, depending on the type of movement and the nature of the bedrock. This paper presents the results of a detailed survey and reconstruction of three distinct deep-seated slope failures in the Raca Unit of the Magura Nappe, Flysch Belt of the Western Carpathians in the Czech Republic. An interdisciplinary approach has enabled a global view of the dynamics and development of these deep-seated slope failures. The three cases considered here have revealed a complex, poly-phase development of slope failure. They are deep-seated ones with depths to the failure surface ranging from 50 to 110m. They differ in mechanism of movement, failure structure, current activity, and total displacement. The main factors influencing their development have been flysch-bedrock structure, lithology, faulting by bedrock separation (which enabled further weakening through deep weathering), geomorphic setting, swelling of smectite-rich clays, and finally heavy rainfall. All of the slope failures considered here seem to have originated during humid phases of the Holocene or during the Late Glacial.