15 July 2019 in Nature Electronics
4 May 2017 in IEEE Journal of Solid-State Circuits
An ultra-low power true random number generator (TRNG) based on a sub-ranging SAR analog-to-digital converter (ADC) is proposed. The proposed TRNG is composed of a coarse-SAR ADC with a low-power adaptive-reset comparator and a low-power dynamic amplifier. The coarse-ADC part is shared with a sub-ranging SAR ADC for area reduction. The shared coarse-ADC not only plays the role of discrete-time chaotic circuit but also reduces the overall SAR ADC energy consumption by selectively activating the fine-SAR ADC. Also, the proposed dynamic residue amplifier consumes only 48 nW and the adaptive-reset comparator generates a chaotic map with only 6-nW consumption. The proposed TRNG core occupies 0.0045 mm2 in 0.18-μm CMOS technology and consumes 82 nW at 270-kbps throughput with 0.6-V supply. It successfully passes all of National Institute of Standards and Technology (NIST) tests, and it achieves the state-of-the-art figure-of-merit of 0.3 pJ/bit.
22 December 2015 in IEEE Journal of Solid-State Circuits
A low-energy 40/160 MHz dual-band full duplex body channel communication (BCC) transceiver and a 13.56 MHz R-C oscillator-based super-regenerative transceiver are integrated in 65 nm CMOS mixed mode process for both entertainment and healthcare applications. The on-chip R-C duplexer uses notch filters for full duplex communication with 40 Mb/s data rate and combined dual-band operation shows 80 Mb/s data rate with half duplex communication. 40 MHz sine wave and 160 MHz rectangular wave are adopted for modulation in the dual-band transmitter with 30 dB SNR improvement, and shared-loop BPSK receiver reduces the power consumption by 25%. The proposed super-regenerative transceiver including an OOK transmitter and an R-C oscillator-based receiver achieves >60dB interference rejection with 100 kb/s data rate and 42.5μW power consumption under the 0.8 V supply.
3 October 2017 in IEEE Journal of Solid-State Circuits
A wearable electrical impedance tomography (EIT) system is proposed for the portable real-time 3-D lung ventilation monitoring. It consists of two types of SoCs, active electrode (AE)-SoC and Hub-SoC, mounted on wearable belts. The 48-channel AE-SoCs are integrated on flexible printed circuit board belt, and Hub-SoC is integrated in the hub module which performs data gathering and wireless communication between an external imaging device. To get high accuracy under the variation of conductivity, the dual-mode current stimulator provides the optimal frequency for time difference-EIT and frequency difference-EIT with simultaneous 4 k-128 kHz impedance sensing. A wide dynamic range instruments amplifier is proposed to provide 94 dB of wide dynamic range impedance sensing. In addition, the 48-channel AE system with the dedicated communication and calibration is implemented to achieve 1.4-mΩ sensitivity of impedance difference in the in vivo environment. The AE-/Hub-SoCs occupy 3.2 and 1.3 mm²in 65-nm CMOS technology and consume 124 μW and 1.1 mW with 1.2 V supply, respectively. As a result, EIT images are reconstructed with 90% of accuracy, and up to 10 frames/s real-time 3-D lung images are successfully displayed.
15 November 2016 in IEEE Journal of Solid-State Circuits
The advanced driver assistance system (ADAS) for adaptive cruise control and collision avoidance is strongly dependent upon the robust image recognition technology such as lane detection, vehicle/pedestrian detection, and traffic sign recognition. However, the conventional ADAS cannot realize more advanced collision evasion in real environments due to the absence of intelligent vehicle/pedestrian behavior analysis. Moreover, accurate distance estimation is essential in ADAS applications and semiglobal matching (SGM) is most widely adopted for high accuracy, but its system-on-chip (SoC) implementation is difficult due to the massive external memory bandwidth. In this paper, an ADAS SoC with behavior analysis with Artificial Intelligence functions and hardware implementation of SGM is proposed. The proposed SoC has dual-mode operations of high-performance operation for intelligent ADAS with real-time SGM in D-Mode (d-mode) and ultralow-power operation for black box system in parking-mode. It features: 1) task-level pipelined SGM processor to reduce external memory bandwidth by 85.8%; 2) region-of-interest generation processor to reduce 86.2% of computation; 3) mixed-mode intention prediction engine for dual-mode intelligence; and 4) dynamic voltage and frequency scaling control to save 36.2% of power in d-mode. The proposed ADAS processor achieves 862 GOPS/W energy efficiency and 31.4GOPS/mm 2 area efficiency, which are 1.53× and 1.75× improvements than the state of the art, with 30 frames/s throughput under 720p stereo inputs.
6 April 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
A highly energy-efficient Computing-in-Memory (CIM) processor for Ternary Neural Network (TNN) acceleration is proposed in this paper. Previous CIM processors for multi-bit precision neural networks showed low energy efficiency and throughput. Lightweight binary neural networks were accelerated with CIM processors for high energy efficiency but showed poor inference accuracy. In addition, most previous works suffered from poor linearity of analog computing and energy-consuming analog-to-digital conversion. To resolve the issues, we propose a Ternary-CIM (T-CIM) processor with 16T1C ternary bitcell for good linearity with the compact area and a charge-based partial sum adder circuit to remove analog-to-digital conversion that consumes a large portion of the system energy. Furthermore, flexible data mapping enables execution of the whole convolution layers with smaller bitcell memory capacity. Designed with 65 nm CMOS technology, the proposed T-CIM achieves 1,316 GOPS of peak performance and 823 TOPS/W of energy efficiency.