An ultra-low power true random number generator (TRNG) based on a sub-ranging SAR analog-to-digital converter (ADC) is proposed. The proposed TRNG is composed of a coarse-SAR ADC with a low-power adaptive-reset comparator and a low-power dynamic amplifier. The coarse-ADC part is shared with a sub-ranging SAR ADC for area reduction. The shared coarse-ADC not only plays the role of discrete-time chaotic circuit but also reduces the overall SAR ADC energy consumption by selectively activating the fine-SAR ADC. Also, the proposed dynamic residue amplifier consumes only 48 nW and the adaptive-reset comparator generates a chaotic map with only 6-nW consumption. The proposed TRNG core occupies 0.0045 mm2 in 0.18-μm CMOS technology and consumes 82 nW at 270-kbps throughput with 0.6-V supply. It successfully passes all of National Institute of Standards and Technology (NIST) tests, and it achieves the state-of-the-art figure-of-merit of 0.3 pJ/bit.
23 October 2018 in IEEE Journal of Solid-State Circuits
A small form-factor, lightweight wireless capsule endoscope (WCE) system with body channel communication (BCC) transceiver ICs is proposed for VGA-resolution image transferring and capsule localization. The transceiver ICs are composed of capsule chip and receiver chip, implemented in a 65-nm CMOS process. In the capsule side, the proposed system provides 360° image capturing through four-camera integration to reduce the miss rate. Also, a dual-band pulse-shaping BCC transmitter is proposed to enable low-power (<1 mW), high-speed (80 Mb/s) image transmission. In the receiver side, contact attenuation compensated-received signal strength indicator (CAC-RSSI) is proposed to increase the capsule localization accuracy. The external system is composed of eight-receiver nodes that allow signal demodulation and localization of the capsule. To reduce transceiver payload and system power consumption, image encoder is implemented in the capsule. The transceiver IC is integrated into the capsule system and verified with body mimicking phantom. The proposed system satisfies compatibility with medical grade diagnosis by operating longer than 8 h with 4 fps and 12 h with 2 fps with conventional two silver oxide 55-mA· h coin batteries. The tested localization accuracy shows less than sub-centimeter range.
3 October 2017 in IEEE Journal of Solid-State Circuits
A wearable electrical impedance tomography (EIT) system is proposed for the portable real-time 3-D lung ventilation monitoring. It consists of two types of SoCs, active electrode (AE)-SoC and Hub-SoC, mounted on wearable belts. The 48-channel AE-SoCs are integrated on flexible printed circuit board belt, and Hub-SoC is integrated in the hub module which performs data gathering and wireless communication between an external imaging device. To get high accuracy under the variation of conductivity, the dual-mode current stimulator provides the optimal frequency for time difference-EIT and frequency difference-EIT with simultaneous 4 k-128 kHz impedance sensing. A wide dynamic range instruments amplifier is proposed to provide 94 dB of wide dynamic range impedance sensing. In addition, the 48-channel AE system with the dedicated communication and calibration is implemented to achieve 1.4-mΩ sensitivity of impedance difference in the in vivo environment. The AE-/Hub-SoCs occupy 3.2 and 1.3 mm²in 65-nm CMOS technology and consume 124 μW and 1.1 mW with 1.2 V supply, respectively. As a result, EIT images are reconstructed with 90% of accuracy, and up to 10 frames/s real-time 3-D lung images are successfully displayed.
9 August 2017 in IEEE Transactions on Circuits and Systems I: Regular Papers
Autonomous mobile robots are receiving a lot of attention for many applications, such as package delivery and smart surveillance, however, the battery capacity is limited to implement intelligent decision making in robots because of the heavy computational costs. In this paper, an ultra-low-power artificial intelligence processor (AIP) is proposed for real-time decision making of autonomous mobile robots. To achieve low power consumption while maintaining high performance, it adopts four key features: 1) an 8-thread tree search processor for real-time path planning; 2) a reinforcement learning accelerator for the avoidance of unexpected obstacles; 3) a 3-level transposition table cache for the reduction of duplicated computations; and 4) a PVT compensation circuit for the stable operation at near-threshold voltage. The proposed 16 mm² AIP is fabricated using 65-nm triple-well CMOS technology. It consumes only 1.1 mW at 0.55 V supply voltage and 7 MHz operating frequency, and 151 mW at 1.2 V supply voltage and 245 MHz operating frequency. The AIP achieves fast search speed (470,000 search/s) and low energy consumption (79 nJ/search), and it is successfully applied to a battery-powered robot system for autonomous navigation without any collision in dynamic indoor environments.
13 September 2018 in Japanese Journal of Applied Physics
The effects of geometrical parameters on the electrical characteristics of network-channel low-temperature polycrystalline silicon (LTPS) thin-film transistors (TFTs) were investigated. The grain boundary and interface trap densities were also extracted using parameters such as hole-to-hole distance, hole-branch top width, effective channel width, and area filling factor ( AF ). It was found that the electrical characteristics were largely dependent on AF , mainly owing to reduced trap densities. However, excessive hole formation in the network-channel structure was found to increase channel resistance and decrease drain current. These results suggest that, for a given footprint device area, denser hole patterns are preferred for achieving better electrical characteristics in novel network-channel LTPS TFTs.