22 April 2024 in Solar RRL
27 November 2023 in Advanced Functional Materials
For high‐performance application of perovskite solar cells (PSCs) in monolithic perovskite/silicon tandem configuration, an optimal bandgap and process method of the perovskite top cell is required. While the two‐step method leads to regular perovskite film crystallization, engineering wider bandgaps (Eg > 1.65 eV) for the solution‐based two‐step method remains a challenge. This work introduces an effective and facile strategy to increase the bandgap of two‐step solution‐processed perovskite films by incorporating bromide in both deposition steps, the inorganic precursor deposition (step 1, PbBr2) and the organic precursor deposition (step 2, FABr). This strategy yields improved charge carrier extraction and quasi‐Fermi level splitting with power conversion efficiencies (PCEs) of up to 15.9%. Further improvements are achieved by introducing CsI in the bulk and utilizing LiF as surface passivation, resulting in a stable power output exceeding 18.5% for Eg = 1.68 eV. This additional performance boost arises from enhanced perovskite film crystallization, leading to improved charge carrier extraction. Laboratory scale monolithic perovskite/silicon solar cells (TSCs) (1 cm2 active area) achieve PCEs up to 23.7%. This work marks a significant advancement for wide bandgap two‐step solution‐processed perovskite films, enabling their effective use in high‐performance and reproducible PSCs and perovskite/silicon TSCs.
23 September 2025 in Small Science
Developing high‐efficiency perovskite/silicon tandem solar cells (PSTs) using scalable deposition methods is crucial for the industrialization of next‐generation photovoltaics. However, developing industrially viable deposition techniques to ensure high performance, uniformity, and compatibility with existing silicon manufacturing remains a key challenge. A scalable hybrid two‐step deposition process, combining evaporation and inkjet printing, is presented for fabrication of high‐performance PSTs. Wide bandgap perovskite solar cells are achieved with power conversion efficiencies (PCEs) of up to 19.8%. Applying this approach to textured silicon bottom cells, the process ensures conformal perovskite growth, critical for industry‐relevant tandem integration. Using this technique, highly efficient, fully textured PSTs with a PCE of 27.4% are fabricated. Homogeneous perovskite thin films are formed up to the substrate's very edge, enabling industry standards for silicon edge isolation. These results highlight the potential of hybrid two‐step inkjet printing for scalable, high‐efficiency PST fabrication, paving the way for industrial adoption.
7 May 2025 in Advanced Energy Materials
Innovations in scalable fabrication processes are pivotal for transferring record power conversion efficiencies (PCEs) of spin‐coated perovskite/silicon‐based tandem solar cells (TSCs) from the laboratory scale to full‐size photovoltaics. In this regard, the homogeneous large‐area drying of precursor ink wet films poses one of the major hurdles. Gas‐assisted drying by linear high‐pressure slot jets comes along with an inhomogeneous flow field, causing unwanted backflows, non‐uniform drying patterns, and strong inhomogeneities at the sample edges. In response, it is demonstrated i) a new 2D comb‐nozzle (CN) drying technique that improves the homogeneity of drying processes and, ii) an adjusted strategy to fabricate high‐quality 2‐step slot‐die (SD)‐coated triple‐halide perovskite thin films. Remarkably, homogeneous and pinhole‐free large‐area SD‐coated perovskite SCs fabricated is demonstrated with all scalable techniques reaching up to 19.6% with enhanced mean PCE‐yields of 90% (compared to 62% with slot‐jet drying). Consequently, the CN drying method is employed for a material composition suitable for tandem applications (Eg ≈1.68 eV). Particularly, the reproducible fabrication of TSCs with PCEs up to 24.6% on large areas with homogeneous PCE variances of ±0.7%abs imply high homogeneity during the coating and drying process and confirms the importance of systematically controlled drying within an optimized 2‐step process.
12 June 2025 in Solar RRL
Perovskite photovoltaics promise high power conversion efficiencies (PCEs) and cost‐effective fabrication, making them a transformative solar technology. Among deposition methods, the solution‐based two‐step process has emerged as a promising approach for integrating high‐quality perovskite layers onto silicon (Si) bottom cells, enabling dense and pinhole‐free films. However, achieving both high efficiency and long‐term stability remains underexplored for solution‐based two‐step‐processed perovskite solar cells (PSCs). This study introduces a versatile solution‐based two‐step method, demonstrating a seamless transition from a triple‐cation (CsMAFA) to a more stable double‐cation (CsFA) perovskite composition. Implementing a novel dual bimolecular passivation strategy with propane‐1,3‐diammonium iodide (PDAI2) and n‐butylammonium iodide (BAI) for both bulk and surface passivation effectively addresses defects at grain boundaries and interfaces. This approach minimizes nonradiative recombination, enhances film crystallization, and promotes efficient charge extraction. The resulting PSCs demonstrate a stable power output of 20.9%, representing the highest reported efficiency for a solution‐based two‐step processed PSC with a bandgap of 1.67 eV. Laboratory‐scale monolithic perovskite/Si tandem solar cells (1 cm2 active area) achieve PCEs exceeding 26% on small‐textured Si bottom cells (<2 μm). This emphasizes the potential of the solution‐based two‐step process for practical implementation in high‐performance photovoltaic systems.
11 July 2024 in Solar RRL