15 March 2019 in Semiconductor Science and Technology
Human health, environmental protection and safety are just a few examples of humankind’s current main concerns, that drive the scientific community to develop sensors able to monitor precisely and provide alerts of possible harm in real time. Over the years, semiconductor metal oxide-based materials have been extensively employed as sensors in several applications. They are of particular interest at the nanometer scale, since it is widely known that a smaller crystallite size enhances a sensor’s performance. Moreover, these materials are highly appealing as they can be produced by low-cost wet-chemical synthesis routes and are in general nontoxic, earth abundant and low cost. This manuscript extensively reviews the recent developments of nanostructured semiconductor metal oxide sensors ranging from gas to humidity sensors, including ultraviolet sensors and biosensors. Sensors based on zinc oxide (ZnO), titanium dioxide (TiO 2 ), tungsten trioxide (WO 3 ), copper oxide (CuO and Cu 2 O), tin oxide (SnO and SnO 2 ) and vanadium oxide (VO 2 and V 2 O 5 ), either as nanoparticles or as continuous films or layers, are described. Their sensing properties are correlated to size, shape, presence of defects and doping elements, amongst other relevant parameters. Various techniques and methods of fabricating these materials are addressed. The review concludes with novel approaches for functionalization and future perspectives for sensor developments.
17 March 2005 in Thin Solid Films
11 October 2009 in Philosophical Magazine
This paper reports the performance of small area solar cells, 128 linear integrated position sensitive detector arrays and thin film transistors based on nanostructured silicon thin films produced by plasma-enhanced chemical vapour deposition technique, close to the onset of dusty plasma conditions, within the transition region from amorphous to microcrystalline. The small area solar cells, produced in a modified single chamber reactor, exhibited very good electrical characteristics with a conversion efficiency exceeding 9%. The 128 integrated position sensitive detector arrays, based on a similar pin structure, allow real-time 3D object imaging with a resolution higher than 90 l p/mm. The thin film transistors produced exhibited field effect mobility of 2.47 cm2/V/s, threshold voltage of 2 V, on/off ratio larger than 107 and sub-threshold slopes of 0.32 V/decade, which are amongst the best results reported for this type of device.
6 February 2019 in ACS Applied Energy Materials
1 July 2013 in Solid State Ionics