2 December 2016 in IEEE Transactions on Microwave Theory and Techniques
In this paper, a novel terminated coupled line structure (TCLS) is introduced, which is constructed by a coupled line section and four terminations loaded on it. Introducing different kinds of terminations, three types of bandpass filters (BPFs) based on TCLSs are proposed, theoretically analyzed, and fabricated, including two single-ended wideband BPFs with fractional bandwidths (FBWs) of 67% and 40% respectively, and a wideband differential BPF with 74% differential-mode FBW. These BPFs can achieve wide passband bandwidth, low in-band insertion loss, high passband selectivity, as well as deep stopband rejection performance simultaneously, benefited from the multiple transmission zeros and transmission poles obtained by the TCLSs. The practical design procedures of these BPFs are presented and explained. The agreement among theoretical predictions, EM-simulated, and measured results validates our proposed filter structures. Finally, the generalized multistage filter topology based on TCLSs is proposed to design high-order filters with better filtering performances.
24 August 2017 in IEEE Microwave and Wireless Components Letters
In this letter, a generic method is presented for multioctave power amplifier (PA) based on extended version of the continuous class-F. The theory allows resistive second-harmonic impedance and sacrifices part of efficiency to get a bandwidth over one octave. A high-voltage GaN HEMT is adopted to achieve high output power and drain efficiency. Finally, a 0.2-2.5 GHz miniature multioctave PA is designed and fabricated. Experimental results show the drain efficiency of 55.5%-70.3% and the output power of 43.7-46.9 dBm across 0.2-2.5 GHz (170%). The compact size of the proposed PA can also be observed with only 2.6 cm × 5.5 cm, which is greatly reduced compared with other PAs with similar performances.
1 November 2015 in Electronics Letters
A wideband filtering power divider (PD) with high selectivity is introduced, based on a terminated coupled line structure. The bandwidth tuning, isolation and impedance matching performances optimisation are presented and explained. Finally, the filtering PD is designed and implemented with a centre frequency ( f 0 ) of 3.0 GHz and a fractional bandwidth of 70%. The upper stopband is achieved up to 2.6 f 0 , with a rejection of better than 13 dB. The measured minimum in‐band insertion loss is 0.3 dB (not including the splitting loss). Isolation of higher than 16.7 dB between the output ports is observed up to 2.7 f 0 .
1 February 2015 in Electronics Letters
A compact and high selective lowpass filter (LPF) with wide stopband is presented using coupled rhombic stubs. The proposed LPF unit is constructed by loading a rhombic stub on a transmission line. Then, a folded three‐element LPF is proposed to achieve compact size and high selectivity by introducing coupling between adjacent rhombic stubs. The operating mechanism of the filter is investigated and explained, by adopting the physically‐based LC‐equivalent circuit model. The implemented final LPF exhibits a wide stopband of up to 11.5 f c with a rejection level of better than 35 dB. Furthermore, the final LPF features a compact size of 0.12 λ g × 0.10 λ g , where λ g is the guide wavelength of f c , and a very high figure‐of‐merit (FOM) of 27 142.
13 May 2016 in Journal of Electromagnetic Waves and Applications
This paper presents a novel compact power divider (PD) with bandpass response and improved out-of-band rejection performance, which features flexible bandwidth adjustment and high passband selectivity. The proposed filtering PD consists of two coupled-line sections, two short-circuited transmission line sections (TLSs), and two cascaded stepped impedance TLSs in symmetrical arrangement. The unique loading point of isolation resistor is proposed to provide enhanced isolation performance, different from that of the conventional Wilkinson PD where the isolation resistor loaded between the output ports. Theoretical investigation adopting even–odd-mode method is presented to explain the operating mechanism. For verification, a filtering PD centered at 2.4 GHz is designed and measured. The measured results agree well with the simulated ones.
1 August 2016 in Electronics Letters
A novel filtering push–pull power amplifier (PPPA), based on unbalanced‐to‐balanced impedance transformers, is presented for the first time. This novel impedance transformer can not only simplify the PPPA topology and miniaturise the overall circuit size, but also provide the bandpass filtering response and improve the second harmonic suppression performance. The proposed impedance transformers, which are constructed by two different C‐type line resonators, can provide good impedance matching performance under the odd‐mode excitation, while achieve high common mode suppression under the even‐mode excitation. Finally, a PPPA is designed and fabricated with the centre frequency of 2.45 GHz and bandwidth of 200 MHz for WLAN application. Moreover, detailed explanation and measured results are demonstrated for verification.