School of Electronic Engineering, Beijing Key Laboratory of Work Safety Intelligent Monitoring Beijing University of Posts and Telecommunications Beijing China
Auto-generated profile, based on publicly available information
Hang Huang
School of Electronic Engineering, Beijing Key Laboratory of Work Safety Intelligent Monitoring Beijing University of Posts and Telecommunications Beijing China
In this letter, a generic method is presented for multioctave power amplifier (PA) based on extended version of the continuous class-F. The theory allows resistive second-harmonic impedance and sacrifices part of efficiency to get a bandwidth over one octave. A high-voltage GaN HEMT is adopted to achieve high output power and drain efficiency. Finally, a 0.2-2.5 GHz miniature multioctave PA is designed and fabricated. Experimental results show the drain efficiency of 55.5%-70.3% and the output power of 43.7-46.9 dBm across 0.2-2.5 GHz (170%). The compact size of the proposed PA can also be observed with only 2.6 cm × 5.5 cm, which is greatly reduced compared with other PAs with similar performances.
1 January 2020 in IEEE Microwave and Wireless Components Letters
An equivalent circuit model of a passive system with nonlinear characteristics was developed to simulate the forward and reversed passive intermodulation product (PIMP) powers. Mitigation methods based on signal compensation were proposed and used to reduce the interferences of passive intermodulation (PIM). The cancellation phenomena of third-order PIMP powers were observed both in the active and passive signal compensation simulations, followed by some theoretical analysis. The advantages and disadvantages of each mitigation method were discussed in detail, providing flexible selections in low-PIM design and PIM elimination in specific applications.
22 September 2017 in Microwave and Optical Technology Letters