Agamyrat Agambayev

Agamyrat Agambayev

Auto-generated profile, based on publicly available information

Agamyrat Agambayev

Computer, Electrical & Mathematical Science, and Engineering Division (CEMSE) King Abdullah University of Science and Technology (KAUST) Thuwal 23955 Saudi Arabia

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2019 in IEEE Access
Verified
Journal Article
Open access
Aslihan KartciAslihan Kartci
Aslihan Kartci
AAAgamyrat Agambayev
Agamyrat Agambayev
MFMohamed Farhat
Mohamed Farhat
Norbert HerencsarNorbert Herencsar
Norbert Herencsar
LBLubomir Brancik
Lubomir Brancik
Khaled Nabil SalamaKhaled Nabil Salama
Khaled Nabil Salama
This study proposes a new approach for the optimization of phase and magnitude responses of fractional-order capacitive and inductive elements based on the mixed integer-order genetic algorithm (GA), over a bandwidth of four decade, and operating up to 1 GHz with low phase error of approximately ±1°. It provides a phase optimization in the desired bandwidth with minimal branch number, and avoids use of negative component values, and any complex mathematical analysis. Standardized, IEC 60063 compliant commercially available passive component values are used; hence, no correction on passive elements is required. To the best knowledge of the authors, this approach is proposed for the first time in the literature. As validation, we present numerical simulations using MATLAB® and experimental measurement results, in particular the Foster-II and Valsa structures with five branches for precise and/or high-frequency applications. Indeed, the results demonstrate excellent performance and significant improvements over the Oustaloup approximation, the Valsa recursive algorithm, and the continued fraction expansion as well as the adaptability of the GA-based design with five different types of distributed RC/RL network.

27 August 2018 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
AAAgamyrat Agambayev
Agamyrat Agambayev
MFMohamed Farhat
Mohamed Farhat
SPShashikant Patole
Shashikant Patole
AHAli H. Hassan
Ali H. Hassan
HBHakan Bagci
Hakan Bagci
Khaled Nabil SalamaKhaled Nabil Salama
Khaled Nabil Salama
The phase angle of a fractional-order capacitor's (FOC) impedance has a constant value between − 90 ° and 0 ° . Maintaining this value over a broad frequency band is of utmost importance since it increases the applicability of the electrical circuit that employs the fractional-order capacitor (FOC). In this work, a molybdenum disulfide (MoS2)-ferroelectric polymer composite is used to design/fabricate an FOC. The resulting FOC's bandwidth of operation, which is defined as the frequency band where the variation in the phase angle is no more than ± 4 ° , is five decades between 100 Hz and 10 MHz, a 3 decades improvement over the best reported state of the art. The value of the constant phase angle can be tuned from − 80 ° to − 58 ° by changing the type of the ferroelectric polymer in the composite and the volume ratio of MoS2. The results presented in this work demonstrate the potential of the FOCs fabricated using MoS2-ferroelectric polymer composites in robust and accurate realization of various electrical systems.

26 February 2018 in IEEE Access
Verified
Journal Article
Open access
Aslihan KartciAslihan Kartci
Aslihan Kartci
AAAgamyrat Agambayev
Agamyrat Agambayev
Norbert HerencsarNorbert Herencsar
Norbert Herencsar
Khaled Nabil SalamaKhaled Nabil Salama
Khaled Nabil Salama
In this paper, general analytical formulas are introduced for the determination of equivalent impedance, magnitude, and phase, i.e., order, for n arbitrary fractional-order capacitors (FoCs) connected in series, parallel, and their interconnection. The approach presented helps to evaluate these relevant quantities in the fractional domain, since the order of each element has a significant effect on the impedance of each FoC and their equivalent capacitance cannot be considered. Three types of solid-state fractional-order passive capacitors of different orders, using ferroelectric polymer and reduced graphene oxide-percolated P(VDF-TrFE-CFE) composite structures, are fabricated and characterized. Using an impedance analyzer, the behavior of the devices was found to be stable in the frequency range 0.2 - 20 MHz, with a phase angle deviation of ±4°. Multiple numerical and experimental case studies are given, in particular for two and three connected FoCs. The fundamental issues of the measurement units of the FoCs connected in series and parallel are derived. A MATLAB open-access source code is given in the Appendix for easy calculation of the equivalent FoC magnitude and phase. The experimental results are in good agreement with the theoretical assumptions.

10 August 2017 in ChemElectroChem
Verified
Journal Article
Closed access
PDF file
AAAgamyrat Agambayev
Agamyrat Agambayev
SPShashikant Patole
Shashikant Patole
MFMohamed Farhat
Mohamed Farhat
Ahmed ElwakilAhmed Elwakil
Ahmed Elwakil
HBHakan Bagci
Hakan Bagci
Khaled Nabil SalamaKhaled Nabil Salama
Khaled Nabil Salama

22 January 2018 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
PDF file
AAAgamyrat Agambayev
Agamyrat Agambayev
KRKaram Hani Rajab
Karam Hani Rajab
AHAli H. Hassan
Ali H. Hassan
MFMohamed Farhat
Mohamed Farhat
HBHakan Bagci
Hakan Bagci
Khaled Nabil SalamaKhaled Nabil Salama
Khaled Nabil Salama
In this study, multi-walled carbon nanotube (MWCNT) filled polyevinelidenefluoride-trifluoroethylene-chlorofluoroethylene composites are used to realize fractional-order capacitors (FOCs). A solution-mixing and drop-casting approach is used to fabricate the composite. Due to the high aspect ratio of MWCNTs, percolation regime starts at a small weight percentage (wt%), 1.00%.The distributed MWCNTs inside the polymer act as an electrical network of micro-capacitors and micro-resistors, which, in effect, behaves like a FOC. The resulting FOCs’ constant phase angle (CPA) can be tuned from − 65 ∘ to − 7 ∘ by changing the wt% of the MWCNTs. This is the largest dynamic range reported so far at the frequency range from 150 kHz to 2 MHz for an FOC. Furthermore, the CPA and pseudo-capacitance are shown to be practically stable (with less than 1% variation) when the applied voltage is, changed between 500 µ V and 5 V. For a fixed value of CPA, the pseudo-capacitance can be tuned by changing the thickness of the composite, which can be done in a straightforward manner via the solution-mixing and drop-casting fabrication approach. Finally, it is shown that the frequency of a Hartley oscillator built using an FOC is almost 15 times higher than that of a Hartley oscillator built using a conventional capacitor.

1 September 2017 in AIP Advances
Verified
Journal Article
Open access
AAAgamyrat Agambayev
Agamyrat Agambayev
SPShashikant Patole
Shashikant Patole
HBHakan Bagci
Hakan Bagci
Khaled Nabil SalamaKhaled Nabil Salama
Khaled Nabil Salama
Pairs of various Polyvinylidene fluoride P(VDF)-based polymers are used for fabricating bilayer fractional order capacitors (FOCs). The polymer layers are constructed using a simple drop casting approach. The resulting FOC has two advantages: It can be easily integrated with printed circuit boards, and its constant phase angle (CPA) can be tuned by changing the thickness ratio of the layers. Indeed, our experiments show that the CPA of the fabricated FOCs can be tuned within the range from -83° to -65° in the frequency band changing from 150 kHz to 10 MHz. Additionally, we provide an empirical formula describing the relationship between the thickness ratio and the CPA, which is highly useful for designing FOCs with the desired CPA.