This study proposes a new approach for the optimization of phase and magnitude responses of fractional-order capacitive and inductive elements based on the mixed integer-order genetic algorithm (GA), over a bandwidth of four decade, and operating up to 1 GHz with low phase error of approximately ±1°. It provides a phase optimization in the desired bandwidth with minimal branch number, and avoids use of negative component values, and any complex mathematical analysis. Standardized, IEC 60063 compliant commercially available passive component values are used; hence, no correction on passive elements is required. To the best knowledge of the authors, this approach is proposed for the first time in the literature. As validation, we present numerical simulations using MATLAB® and experimental measurement results, in particular the Foster-II and Valsa structures with five branches for precise and/or high-frequency applications. Indeed, the results demonstrate excellent performance and significant improvements over the Oustaloup approximation, the Valsa recursive algorithm, and the continued fraction expansion as well as the adaptability of the GA-based design with five different types of distributed RC/RL network.
In this study, a new voltage-mode fractional-order oscillator using two unity-gain voltage buffers, two operational transconductance amplifiers, one resistor, and two capacitors is presented. The design procedure of integer-order as well as fractional-order oscillator employing in total 20 MOS transistors is discussed. Effects of fractional-order capacitors on amplitude, phase, condition of oscillation, and frequency of oscillation are shown. Various case examples are given while SPICE simulations using TSMC 0.35 μm level-3 CMOS process parameters with ±1.65 V supply voltages verify their operation and compare with theoretical ones.
1 January 2013 in Advances in Electrical and Computer Engineering
The paper deals with a technique for the simulation of higher-order electrical circuits with parameters varying randomly. The principle consists in the utilization of the theory of sto ...
6 June 2018 in Journal of Circuits, Systems and Computers
The paper presents a computationally efficient method for modeling and simulating distributed systems with lossy transmission line (TL) including multiconductor ones, by a less conventional method. The method is devised based on 1D and 2D Laplace transforms, which facilitates the possibility of incorporating fractional-order elements and frequency-dependent parameters. This process is made possible due to the development of effective numerical inverse Laplace transforms (NILTs) of one and two variables, 1D NILT and 2D NILT. In the paper, it is shown that in high frequency operating systems, the frequency dependencies of the system ought to be included in the model. Additionally, it is shown that incorporating fractional-order elements in the modeling of the distributed parameter systems compensates for losses along the wires, provides higher degrees of flexibility for optimization and produces more accurate and authentic modelling of such systems. The simulations are performed in the Matlab environment and are effectively algorithmized.