Huai-Cong Liu

Huai-Cong Liu

Auto-generated profile, based on publicly available information

Huai-Cong Liu

Department of Electrical Engineering, Hanyang University, Seoul, Korea

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 October 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HLHuai-Cong Liu
Huai-Cong Liu
JLJu Lee
Ju Lee
As a kind of direct-on-line motor, super premium efficiency (IE4) line-start synchronous reluctance motors (LS-SynRMs) were developed recently and are now used in many applications, including fans, pumps, and compressors. This paper presents an optimum design and comparative study of LS-SynRMs with additional losses and impact during the manufacturing process (electrical steel cutting/punching damage as well as squirrel-cage die-casting with bubble effects). The work results indicate that the LS-SynRM design with the “manufacturing process loss” effect should be considered and compensated for the design in order to achieve an IE4 class efficiency and ensure synchronization. Furthermore, the LS-SynRM rotor with multilayer flux barriers and rotor slots is investigated in detail. The influences of optimum design geometrical parameters (flux barriers thickness, segments thickness, length of rotor slots, etc.) on the performances of the basic model and optimum design model are evaluated with finite-element analysis (FEA) results. For more accurate results, the effects of saturation, saliency ratio, inductance difference, and the change in the B-H/B-P curve in damaged motor core edges are considered. Meanwhile, in the squirrel cage, the porosity rate distributions are considered. The copper loss, iron loss, starting torque, power factor, efficiency, and synchronization ability are investigated. The experimental results verify the accuracy of the process presented in this paper.

7 February 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
HLHuai-Cong Liu
Huai-Cong Liu
IKIn-Gun Kim
In-Gun Kim
YOYe Jun Oh
Ye Jun Oh
JLJu Lee
Ju Lee
SGSung-Chul Go
Sung-Chul Go
This paper proposes the optimization of the shape and size of a ferrite magnet and the arrangements necessary to reduce torque ripple and maximize back electromotive force (B-EMF) in a permanent-magnet-assisted synchronous reluctance motor. First, four different models of general magnet arrangements were selected, and analysis using the finite-element method was performed under open circuit and load operations for each of the four models. Next, the relationship between the cogging torque and the torque ripple was analyzed, considering the segment saturation phenomenon. Then, based on the initial model, the design was optimized for maximum B-EMF and minimum torque ripple, and the total harmonic distortion was measured. Finally, the validity and superiority of the optimized design were confirmed by manufacturing a prototype motor and performing the experiment.

24 May 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
SCSooyoung Cho
Sooyoung Cho
HLHuai-Cong Liu
Huai-Cong Liu
HAHanwoong Ahn
Hanwoong Ahn
JLJu Lee
Ju Lee
HLHyungwoo Lee
Hyungwoo Lee
This paper presents a new method for calculating the braking force of a drum-type eddy current brake with a two-layer structure. The drum-type eddy current brake should have a structure that improves the braking force by applying a material with high conductivity inside the drum because the eddy current loss generated from the drum is used as the braking force. In addition, because the eddy current brake operates at various speeds while braking the vehicle, it is necessary to grasp the braking force according to the speed. Furthermore, because the material of the drum is composed of non-laminated iron having conductivity, the skin effect and the armature reaction phenomenon appear, and the skin depth and the air-gap flux density are different depending on the braking speed. In this paper, the value of the eddy current loss of the eddy current brake with a copper coating inside the drum is newly presented and compared with the finite-element analysis results. In addition, the change in the speed-torque curve according to the conductivity value of the drum and inner coating material are shown. Finally, an experiment was conducted to compare and verify the characteristic curve of the eddy current brake obtained from the newly derived equations.

2 February 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
HHHyun-Seok Hong
Hyun-Seok Hong
HLHuai-Cong Liu
Huai-Cong Liu
SCSooyoung Cho
Sooyoung Cho
JLJu Lee
Ju Lee
CJChang-Sung Jin
Chang-Sung Jin
This paper contains the results of actually applying to motor development the 3-D printing technology, which is one of noteworthy technologies to lead industries in the future. The current level of 3-D printing technology was identified, synchronous reluctance motor was designed and fabricated on the basis of the technology, and experiment was carried out to verify the design and fabrication. The comparative analysis between the existing model and the proposed model was carried out by finite element method analysis and experiment, and it shows the possibility that 3-D printing technology can be applied to the motor industry.

7 February 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
SCSooyoung Cho
Sooyoung Cho
HAHanwoong Ahn
Hanwoong Ahn
HLHuai Cong Liu
Huai Cong Liu
HHHyun-Seok Hong
Hyun-Seok Hong
JLJu Lee
Ju Lee
SGSung-Chul Go
Sung-Chul Go
The spoke-type permanent magnet synchronous motor (PMSM) is a motor built using nonrare earth elements, which feature low flux density. It has a flux concentrated structure of permanent magnet arrangement to improve power density. Further, the torque in the spoke-type PMSM is composed of a magnetic torque component from the permanent magnets and a reluctance torque arising from the inductance difference between the d - and q -axis. This paper analyzed the d - and q -axes inductances that affect the reluctance torque depending on the magnitude of the applied current and the current phase angle of the spoke-type PMSM at base speed. We also derived the variation of the d - and q - axis inductances, which is shown at the operation speed region. Accordingly, the variation of the current phase angle for generating the maximum output power is analyzed. Based on the above results, we predicted the variation in the driving mode of the spoke-type PMSM, and subsequently verified the prediction experimentally.

18 September 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
HLHuai-Cong Liu
Huai-Cong Liu
Ho-Joon LeeHo-Joon Lee
Ho-Joon Lee
HSHyun-Soo Seol
Hyun-Soo Seol
SCSooyoung Cho
Sooyoung Cho
JLJu Lee
Ju Lee
Ye Jun OhYe Jun Oh
Ye Jun Oh
This paper proposes a quasi-semi-closed (QSC) slot design method for an open-slot-type interior permanent magnet synchronous motor (IPMSM) for independently rotating wheelsets necessary to reduce the total harmonic distortion of no-load back-electromotive force and the torque ripple in the IPMSM. Four different slot-opening models were selected--the basic model, hairpin coil model, magnetic-wedge model, and QSC-slot model--and 2-D finite-element analysis was performed under open-circuit and load operations for each of the four models. Next, the relationships among the cogging torque, the torque ripple, and the saturation phenomenon in the core were analyzed. In addition, the manufacturing process, manufacturing cost, fill factor, end-winding resistance, copper loss, and efficiency were investigated. The experimental results verify the accuracy of the proposed method.