This paper proposes the optimization of the shape and size of a ferrite magnet and the arrangements necessary to reduce torque ripple and maximize back electromotive force (B-EMF) in a permanent-magnet-assisted synchronous reluctance motor. First, four different models of general magnet arrangements were selected, and analysis using the finite-element method was performed under open circuit and load operations for each of the four models. Next, the relationship between the cogging torque and the torque ripple was analyzed, considering the segment saturation phenomenon. Then, based on the initial model, the design was optimized for maximum B-EMF and minimum torque ripple, and the total harmonic distortion was measured. Finally, the validity and superiority of the optimized design were confirmed by manufacturing a prototype motor and performing the experiment.
Recently, the permanent magnet-assisted synchronous reluctance motor (PMa-SynRM) that can replace induction motor has been more studying because of the needs of the high efficiency motor development for minimum energy performance standard. PMa-SynRM requires the speed and position information of rotor to control motor correctly. However, sensor for rotor information has many problems such as mounting space shortage and the additional system cost. Therefore, in this paper, the speed-sensorless control based on reference model adaptive control is introduced to eliminate the sensor. And mechanical design is improved for control. The proposed method is verified by simulation.
2 January 2017 in Journal of Electrical Engineering & Technology