29 March 2026 in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
With the expansion of global energy consumption and the increasing reliance on fossil fuels, the costs of these fuels are also rising, and the search for alternative energy sources is accelerating. The conversion of non-structural mechanical energy into electrical energy, the primary target of our study, is gaining importance every day. Piezoelectric properties can generate voltage under mechanical stress, and with these effects, energy recovery applications create active potential. This research investigates whether sudden pressure fluctuations in water prices can be used as a mechanical source for piezoelectric energy harvesting. For the experimental study, an experimental setup consisting of 1-inch diameter pipes, similar to municipal water lines, was constructed. A PZT-4 type piezoelectric material was placed inside the pipe. It was electrically insulated to ensure safe use since it would come into contact with water. Ball valves were chosen to ensure controlled pressure cycles in the experimental setup. Pressure regulators were used to maintain consistent system pressure and prevent exceeding limits. The pressure ranges in which the experiments were conducted were between 1 and 6 bar.Sudden pressure changes occurring in each cycle generated mechanical stress on the piezoelectric element, producing a measurable stress output. After conducting tests with PZT-4 material in the experimental setup, the same experiments were repeated with PZT-5 material. The data obtained from the experimental setup were analyzed, and the voltage values were used to determine the optimum working pressure range.Piezoelectric materials compatible with the results are available and suitable for integration into infrastructures. It was assessed that some of the lost hydraulic energy could be recovered in this way. Furthermore, it was concluded that it would contribute to sustainable energy applications.
26 January 2026 in Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi
The increasing energy demand and the dwindling fossil fuel reserves are leading to a shift towards alternative energy sources. In this context, the conversion of pressure or vibration-induced irregularities in the environment into electrical energy through piezoelectric materials that generate an electric charge under mechanical stress has been considered. In this study, the possibility of generating electrical energy from transient pressure fluctuations in municipal water distribution lines was investigated using an experimental setup. For this purpose, a laboratory-scale experimental setup consisting of 1-inch diameter pipe elements was created to simulate similar hydraulic conditions observed in urban water networks. PZT-5 and PZT-8 type piezoelectric ceramics were used in a pipeline, electrically isolated from the fluid, and subjected to pressure variations controlled by a ball valve in the range of 1–6 bar. Analysis of the results shows that the highest voltage value is reached at 3 bar with PZT-5 material. With PZT-8 material, a stepped voltage value up to 6 bar is observed. It has been shown that the use of PZT material can provide energy recovery from pressure fluctuations and can be used in water distribution lines.