17 December 2019 in IEEE Transactions on Electron Devices
A SPICE model for phase change memories (PCM) without relying on macro modules is developed in this work. The crystal fraction, physical geometry, and the conduction path of the amorphous region are treated as dynamic state variables to keep track of the memory cell status during SET and RESET. The memory cell resistance is calculated based on a detail 3-D resistance model to capture its transitional behavior during switching. The detail physical formulation correctly reproduced a recent observation of oscillation during the SET operation. The model has been implemented in SPICE, and the convergence of the model is demonstrated by simulations of a complete PCM array. The use of dynamic state variables also significantly reduces the number of internal nodes to one, which helps convergence and reduces the simulation time.
20 May 2020 in IEEE Access
A phase change memory (PCM) model suitable for neuromorphic circuit simulations is developed. A crystallization ratio module is used to track the memory state in the SET process, and an active region radius module is developed to track the continuously varying amorphous region in the RESET process. To converge the simulations with bi-stable memory states, a predictive filament module is proposed using a previous state in iterations of nonlinear circuit matrix under a voltage-driven mode. Both DC and transient analysis are successfully converged in circuits with voltage sources. The spiking-timedependent- plasticity (STDP) characteristics essential for synaptic PCM are successfully reproduced with SPICE simulations verifying the model’s promising applications in neuromorphic circuit designs. Further on, the developed PCM model is applied to propose a neuron circuit topology with lateral inhibitions which is more bionic and capable of distinguishing fuzzy memories. Finally, unsupervised learning of handwritten digits on neuromorphic circuits is simulated to verify the integrity of models in a large-scale-integration circuits. For the first time in literature an emerging memory model is developed and applied successfully in neuromorphic circuit designs, and the model is applicable to flexible designs of neuron circuits for further performance improvements.
2 June 2021 in IEEE Transactions on Electron Devices
A dynamic current model for the double gate negative capacitance field-effect transistor (NCFET) of the metal-ferroelectric-insulator-semiconductor (MFIS) structure is presented in this work. With a damping parameter ρ in the Landau-Khalatnikov (LK) theory for general ferroelectric (FE) materials, the gate control equation of NCFET is intrinsically dynamic which is solved directly as a basis of NCFET modeling. With the time-dependent charge densities at the source and drain sides, a dynamic current model is formulated analytically for the first time, considering the dynamic terms in a self-consistent way. The model has been verified with numerical TCAD simulations. It accurately reproduces the static negative capacitance (NC) effect in enhancing the driving current, as well as the dynamic NC effect, in the conduction delay and hysteresis for a wide range of NCFET parameters. The dynamic model after implementations is successfully applied to circuit simulations such as ring oscillators without convergence issues.
27 July 2021 in IEEE Transactions on Electron Devices
A phase-change memory (PCM) model for robust and efficient simulations of circuits including neuromorphic ones is reported in this work. The features of a hysteretic dynamic resistance in the voltage domain, and the incubation in the crystallization, are covered in the model. The Landau-Khalatnikov (LK)-type equation for ferroelectric is used to develop the PCM hysteresis module. A voltage-controlled relaxation oscillation is successfully simulated for the Ge 2 Sb 2 Te 5 (GST) PCM. A technique of direct evaluation (DE) is then developed to reformulate the PCM model without any internal node. A significant enhancement of simulation efficiency is achieved compared with the traditional approach without sacrificing the accuracy. The functional correctness of the PCM device model and the acceleration effect in circuit simulations are verified.
24 July 2018 in Integrated Ferroelectrics
It has been previously indicated that graphyne-like BN (BNyne) sheets have distinct and interesting properties with graphyne and h-BN sheets. Herein, the geometric and electronic properties of C-doped graphyne-like BN (C-BNyne) sheets (including α-, β- and γ-) were systematically investigated by the first-principles calculations. The results reveal that C impurity is more likely to substitute the linear-B and corner-N sites due to the lower formation energy. The C atom incorporation could lead to a change in electron transfer and local bond lengths and a pronounced structural distortion was observed in α C-doped linear-B BNyne and in γ C-doped linear-B BNyne configurations. When a single C impurity atom was doped in linear-B site, it introduced donor levels near the bottom of the conduction band and thus the structures show n-type semiconductor character. As for C-doped corner-N site BNynes, electronic structure calculation showed p-type semiconductor character. Meanwhile, strong spin splitting phenomenon occurs in β C-doped linear-B BNyne and the spin splitting character originated from the impurity C atom and its first neighboring B atom. However, the other doped configurations are nonmagnetic semiconductor.