A physics-based SPICE model for dopant segregated tunneling field-effect transistors (DS-TFETs) with gate-to-drain underlap is developed for the design technology co-optimization (DTCO) of TFETs with the foundry process. It captures all the current components in full operation regions, including band-to-band tunneling (BTBT), forward p-i-n diode, gate leakage, and also ambipolar conduction. The channel surface potential is formulated first, with which the current expressions are derived and verified with experiments calibrated TCAD simulations. Model predictions of current, conductance, and voltage transfer characteristic (VTC) are in good agreement with measurement data of hardware devices (nTFET and pTFET) as well as circuits. This model has been written in Verilog-A language and employed in the TFET circuits design.
27 July 2021 in IEEE Transactions on Electron Devices
A phase-change memory (PCM) model for robust and efficient simulations of circuits including neuromorphic ones is reported in this work. The features of a hysteretic dynamic resistance in the voltage domain, and the incubation in the crystallization, are covered in the model. The Landau-Khalatnikov (LK)-type equation for ferroelectric is used to develop the PCM hysteresis module. A voltage-controlled relaxation oscillation is successfully simulated for the Ge 2 Sb 2 Te 5 (GST) PCM. A technique of direct evaluation (DE) is then developed to reformulate the PCM model without any internal node. A significant enhancement of simulation efficiency is achieved compared with the traditional approach without sacrificing the accuracy. The functional correctness of the PCM device model and the acceleration effect in circuit simulations are verified.
A robust simulation framework was developed for nanoscale phase change memory (PCM) cells. Starting from the reaction rate theory, the dynamic nucleation was simulated to capture the evolution of the cluster population. To accommodate the non-uniform critical sizes of nuclei due to the non-isothermal conditions during PCM cell programming, an improved crystallization model was proposed that goes beyond the classical nucleation and growth model. With the above, the incubation period in which the cluster distributions reached their equilibrium was captured beyond the capability of simulations with a steady-state nucleation rate. The implications of the developed simulation method are discussed regarding PCM fast SET programming and retention. This work provides the possibility for further improvement of PCM and integration with CMOS technology.
14 October 2022 in IEEE Transactions on Electron Devices
This work develops a model of the temperature and resistance for the RESET of confined phase change memory (PCM). The confined PCM, unlike the mushroom type, has heating inside the cell and higher resistance sensitivity to active region size. The ideal temperature profile is derived from a steady-state heat conduction formulation based on a quasi-3D approach. A thermal subcircuit is then proposed to implement the heating module, considering the thermoelectric effect (TEE) and temperature dependence of phase change materials, to obtain the active region size. The resistance of the irregular active region is then calculated using an integral method. Calibrated TCAD simulations and experimental data are used to verify the model with desired scalability and accuracy.