6 May 2021 in Physical Chemistry Chemical Physics
In this study, in situ electrochemical Raman spectroscopy was applied to clarify the charge storage mechanism in three types of anodes, synthetic graphite, reduced graphene oxide (rGO), and nitrogen-doped reduced graphene oxide (N-rGO). The Li+ intercalation phenomenon was measured in LiPF6 electrolyte solution using a modified coin cell setup. The synthetic graphite anode showed the splitting of the G peak at the potential E < 0.2 V vs. Li/Li+, corresponding to the formation of a graphite intercalation compound (GIC) and its second-order 2D peak was found to be red-shifted due to charge transfer and induced strain in the potential region of 0.5 to 0.15 V vs. Li/Li+. In the case of rGO, the lattice defects assisted in large and early intercalation of electrolyte ions, which is confirmed by the red-shift in the G peak (∼36 cm−1) and its early disappearance below 0.3 V vs. Li/Li+, respectively. Unlike rGO, nitrogen vacancies in N-rGO provide active sites for Li+ intercalation, resulting in enhanced charge transfer, displayed by the large red-shift in the G peak (∼55 cm−1) and blue-shift in the D peak. In addition, a new Raman peak at 1850 cm−1 was observed in N-rGO for the first time, corresponding to the formation of a reversible intermediate species from the interaction between Li+ and nitrogen vacancies. This work demonstrates the use of a simple in situ technique to get insight into the nano-carbon electrodes during device operation and to reveal the role of doped nitrogen atoms for Li+ intercalation.
30 November 2018 in RSC Advances
Hierarchical interconnected nanosheets (HIN) of cobalt manganese nickel sulfide (CoMnNiS) were synthesized on Ni foam by a simple and economical electrodeposition technique for energy storage application. Sulfonated thin nanosheets of Co, Mn and Ni provide stability of chemical activity, surface functionalization and surface reactivity to the electrode. The fabricated electrode shows a specific capacity of 257.4 mA h g−1 (at 2.5 A g−1), measured by galvanostatic charging–discharging (GCD). Both diffusion and capacitive mechanisms in the sulfide layer contribute to the high electrical conductivity. Asymmetric devices CoMnNiS/NiCuO and CoMnNiS/CNT (CNT = carbon nanotubes) were fabricated, providing a maximum operating voltage of 1.7 V and 1 V, specific capacity of 20.8 and 50.8 mA h g−1, and energy density of 8.4 and 6.3 W h kg−1 corresponding to a power density of 985 and 211 W kg−1, respectively, at a current density of 0.5 and 0.63 A g−1. These results demonstrate a novel material for application in energy storage devices as an electrode.
6 March 2021 in Journal of Materials Chemistry A
Improved performance of an IrO 2 nanoparticle catalyst because of the B–N, B–C, and N–C functional groups and conductive rGO network in BN-rGO.
5 September 2020 in SN Applied Sciences
5 August 2020 in Catalysis Science & Technology
The present work details the development of IrO2nanoparticles (nps) supported on B-doped reduced graphene oxide as an oxygen evolution reaction (OER) electrocatalyst for electrochemical water splitting.
1 January 1992 in Materials Science Forum