7 December 2020 in IEEE Transactions on Microwave Theory and Techniques
This work presents diplexers realized with folded circular substrate integrated waveguide (FCSIW) cavity filters. The properties of such cavities are analyzed, and empirical equations for calculating the resonant frequencies are given. The analysis relies on an even-/odd-mode decomposition. A 10-GHz filter is designed based on this approach. In the second step, its size is reduced, still maintaining the passband behavior. An asymmetric taper is used to connect two such filters to realize a diplexer. Two diplexers with center frequencies of 10/15 and 12/13.5 GHz are presented. The diplexers are several times more compact than comparable devices reported in the literature. The components are manufactured, and the functionality is demonstrated by simulation and measurements.
25 December 2017 in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
The nondestructive characterization of small liquid volumes, as well as the detection of single biological cells, can lead to new insights for biomedical and biotechnological applications. The dielectric permittivity of the sample, which depends on the chemical composition, is detected using electromagnetic sensors in the microwave frequency range. The sensing system proposed here is based on resonant near-field sensors, which are combined with a microfluidic chip. The sample volume of a few picoliters enables single-cell measurements. A novel process featuring a biocompatible polymer material is used for fabricating the microfluidic channel for liquid samples. Two opposed sensing tips are integrated at the bottom of the channel to improve the sensitivity to small dielectric contrasts. They are connected to two resonators, which allows to simultaneously characterize the sample permittivity at two different frequencies. In a proof-of-principle experiment, single cells of the Chinese hamster ovary cell line are detected. This shows that the proposed sensing system is suitable for single-cell characterization due to its high sensitivity and spatial resolution. A potential biomedical application is the systematic investigation of various cell types and states to elucidate potential distinguishing characteristics.
13 February 2018 in IEEE Transactions on Electron Devices
Commercial Ku-band tapered helix traveling-wave tubes (TWTs) and a folded-waveguide Q -band TWT are modeled and simulated in CST Particle Studio (PS) on a desktop computer. Efficient models for the electron beam, the severs, and the delay line are investigated to enable accurate and automatable model generation, simulation, as well as pre- and postprocessing. The results of particle-in-cell simulation in CST PS are presented and compared to those of the specialized steady-state simulation codes MVTRAD and KlysTOP, as well as to measurements.
9 March 2021 in IEEE Microwave and Wireless Components Letters
This contribution presents a vertical transition between a WR34 rectangular waveguide (RWG) and two grounded coplanar waveguides (GCPW). It is intended for dual-band phased array applications and thus includes a diplexer. The RWG is the common port and the GCPWs are the diplexed 20 and 30 GHz ports. This yields a very compact design compared to conventional cascaded circuit topologies. The realized component exhibits a port matching and an isolation exceeding 10 dB and 30 dB, respectively, over more than 500 MHz in both bands.
6 May 2024 in IEEE Transactions on Microwave Theory and Techniques
In this work, a passive dual-polarized shared antenna aperture and active beamformer front-ends are integrated into a phased array module. The system operates in the $K$ -/ $Ka$ -band and is intended for satellite communications. It consists of a hybrid assembly of aluminum waveguide components and printed circuit boards that are electrically connected by anisotropic conductive adhesive, containing a heterodyne transceiver with $L$ -band interfaces. For proof of concept, a demonstrator with 64 transmit (Tx) and 32 receive (Rx) elements is fabricated and characterized. It provides full-duplex Tx/Rx operation with bandwidths of 1 GHz centered around 29.5 (Tx) and 19.5 GHz (Rx), beam scanning over wide angular ranges up to 60 $^{\circ}$ in both $H$ -and $E$ -planes, an equivalent isotropic radiated power of up to 20.4 dBW at 1-dB power compression and an Rx gain to noise temperature ratio of up to $-$ 10.2 dB/K at room temperature. The measured performances are comparable to those of phased array systems with separate apertures and thus validate the integration approach.