11 July 2020 in Sedimentology
Contourite drift systems form a significant component of the marine clastic sedimentary record. Although contourites form in all tectonic settings, few studies have described their development along convergent margins; such characterization is needed to underpin oceanographic and palaeoenvironmental studies in active settings. This study is the first to document contourite drift development along the Hikurangi subduction margin of New Zealand. Integration of bathymetric, seismic and well data enables five classes of drift to be recognized around the subduction wedge, occurring in three principal associations: (i) an upper slope drift association of giant elongate mounded (ca 150 km long, 50 km wide and up to 1100 m thick) and plastered drifts (ca 300 km long, 8 km wide and <600 m thick), which occurs upon and inboard of a major intrabasinal thrust‐cored high, whose long axis parallels the coast; shallow bottom currents disperse sub‐parallel to this axis; (ii) a spatiotemporally discontinuous association of confined and mounded hybrid drifts (ca 500 m long, <2 km wide and up to 500 m thick) that occurs along the mid‐to‐outer slope domain of the wedge, recording the interaction of along‐slope and downslope currents within trench‐slope basins; and (iii) a trench fill assemblage that implies the passage of abyssal bottom currents across a 40 km reach of the trench‐axial Hikurangi Channel‐levée, with associated modification of the channel form and of overbank sediment waves. The fundamental presence of contourites along this margin appears to depend on the orientation and strength of oceanographic bottom currents. However, drift type and evolution vary depending on the slope gradient and the presence of irregular seafloor topography created by tectonic structures. The documented drifts are generally smaller, less continuous, and develop more intermittently than similar styles of drifts documented on passive margins; this mode of occurrence may be characteristic of contourite development on convergent margins.
2 July 2018 in Sedimentology
16 April 2019 in Geological Society, London, Special Publications
The structure and distribution of accommodation in fold and thrust belts vary both laterally and longitudinally. Here we integrate gravity, bathymetry and 2D seismic datasets to investigate the structural and stratigraphic variation in the southern part of the Hikurangi subduction wedge, onshore and offshore North Island, New Zealand. Three morphostructural portions are recognized: The inner portion demonstrates reactivation of inherited structures, producing thick-skinned deformation. Pre-subduction rocks are represented by kilometres of acoustically chaotic seismofacies. Thick-skinned deformation and readily deformable substrate lead to the development of wide trench-slope sub-basins, infilled with >5 km of syn-subduction sediments. The mid portion typically demonstrates thrust faults with connections to deeper structures, leading to the development of an imbricate system with asymmetrical sub-basins typically <5 km thick developed on the back-limb of thrust related folds. An antiformal stack marks the transition from the thick-skinned interior of the basin to the thin-skinned accretionary prism. Beyond this, the relatively non-deformed outer portion demonstrates frontal folds, propagating thrusts and up to 3 km thickness of syn-subduction strata. Structural variation across the subduction wedge controls the generation of accommodation with implications for sediment distribution within fold and thrust belts and for petroleum system development.
1 April 2022 in Physics of Fluids
Lattice Boltzmann method models offer a novel framework for the simulation of high Reynolds number dilute gravity currents. The numerical algorithm is well suited to acceleration via implementation on massively parallel computer architectures. Here, we present two lattice Boltzmann method models of lock-exchange dilute gravity currents in which the largest turbulent length scales are directly resolved. The three-dimensional simulations are accelerated by exporting computations to a graphics processing unit and are validated against experiments and high-resolution simulations for Reynolds numbers up to 30 000. The lattice Boltzmann method models achieve equivalent accuracy to conventional large-eddy simulation models in the prediction of key flow properties. A conservative analysis of computational performance relative to conventional methods indicates that the presented framework reduces simulation times by two orders of magnitude. Therefore, it can be used as a foundation for the development of depth-resolving models that capture more of the complexity of environmental gravity currents.
1 September 2022 in Physics of Fluids
The lock-exchange problem is used extensively to study the flow dynamics of density-driven flows, such as gravity currents, and as a canonical problem to mixing in stratified flows. Opposite halves of a domain are filled with two fluids of different densities and held in place by a lock-gate. Upon release, the density difference drives the flow causing the fluids to slosh back and forth. In many scenarios, density stratification will also impose a viscosity stratification (e.g., if there are suspended sediments or the two fluids are distinct). However, numerical models often neglect variable viscosity. This paper characterizes the effect of both density and viscosity stratification in the lock-exchange configuration. The governing Navier–Stokes equations are solved using direct numerical simulation. Three regimes are identified in terms of the viscosity ratio between the dense and less dense fluids: when , the flow dynamics are similar to the equal-viscosity case; for intermediate values ( ), viscosity inhibits interface-scale mixing leading to a global reduction in mixing and enhanced transfer between potential and kinetic energy. Increasing the excess viscosity ratio further ( ) results in significant viscous dissipation. Although many gravity or turbidity current models assume constant viscosity, our results demonstrate that viscosity stratification can only be neglected when . The initial turbidity current composition could enhance its ability to become self-sustaining or accelerating at intermediate excess viscosity ratios. Currents with initially high excess viscosity ratio may be unable to dilute and propagate long distances because of the decreased mixing rates and increased dissipation.
1 January 2020 in Physics of Fluids
Real world gravity current flows rarely exist as a single discrete event, but are instead made up of multiple surges. This paper examines the propagation of surges as pulses in gravity currents. Using theoretical shallow-water modeling, we analyze the structure of pulsed flows created by the sequential release of two lock-boxes. The first release creates a gravity current, while the second creates a pulse that eventually propagates to the head of the first current. Two parameters determine the flow structure: the densimetric Froude number at the head of the current, Fr, and a dimensionless time between releases, tre. The shallow-water model enables the flow behavior to be mapped in (Fr, tre) space. Pulse speed depends on three critical characteristic curves: two that derive from the first release and correspond to a wavelike disturbance which reflects between the head of the current and the back of the lock-box and a third that originates from the second release and represents the region of the flow affected by the finite supply of source material. Pulses have non-negative acceleration until they intersect the third characteristic, after which they decelerate. Variations in pulse speed affect energy transfer and dissipation. Critically for lahars, landslides, and avalanches, pulsed flows may change from erosional to depositional, further affecting their dynamics. Gravity current hazard prediction models for such surge-prone flows may underpredict risk if they neglect internal flow dynamics.