4 June 2021 in Bioinspiration & Biomimetics
We investigate the influence of smooth and ribletted shark skin on a turbulent boundary layer flow. Through laser Doppler anemometry (LDA) the role of riblets in combination with the shark skin denticle is established for the first time. Our results show that smooth denticles behave like a typical rough surface when exposed to an attached boundary layer. Drag is increased for the full range of tested dimensionless denticle widths, w + ≈ 25–80, where w + is the denticle width, w, scaled by the friction velocity, u
τ
, and the kinematic viscosity, ν. However, when riblets are added to the denticle crown we demonstrate there is a significant reduction in drag, relative to the smooth denticles. We obtain a modest maximum drag reduction of 2% for the ribletted denticles when compared to the flat plate, but when compared to the smooth denticles the difference in drag is in excess of 20% for w + ≈ 80. This study enables a new conclusion that riblets have evolved as a mechanism to reduce or eliminate the skin friction increase due to the presence of scales (denticles). The combination of scales and riblets is hydrodynamically efficient in terms of skin-friction drag, while also acting to maintain flow attachment, and providing the other advantages associated with scales, e.g. anti-fouling, abrasion resistance, and defence against parasites.
1 April 2022 in Physics of Fluids
Lattice Boltzmann method models offer a novel framework for the simulation of high Reynolds number dilute gravity currents. The numerical algorithm is well suited to acceleration via implementation on massively parallel computer architectures. Here, we present two lattice Boltzmann method models of lock-exchange dilute gravity currents in which the largest turbulent length scales are directly resolved. The three-dimensional simulations are accelerated by exporting computations to a graphics processing unit and are validated against experiments and high-resolution simulations for Reynolds numbers up to 30 000. The lattice Boltzmann method models achieve equivalent accuracy to conventional large-eddy simulation models in the prediction of key flow properties. A conservative analysis of computational performance relative to conventional methods indicates that the presented framework reduces simulation times by two orders of magnitude. Therefore, it can be used as a foundation for the development of depth-resolving models that capture more of the complexity of environmental gravity currents.
1 February 2023 in Royal Society Open Science
We investigate the flow over smooth (non-ribletted) shark skin denticles in an open-channel flow using direct numerical simulation (DNS) and two Reynolds averaged Navier–Stokes (RANS) closures. Large peaks in pressure and viscous drag are observed at the denticle crown edges, where they are exposed to high-speed fluid which penetrates between individual denticles, increasing shear and turbulence. Strong lift forces lead to a positive spanwise torque acting on individual denticles, potentially encouraging bristling if the denticles were not fixed. However, DNS predicts that denticles ultimately increase drag by 58% compared to a flat plate. Good predictions of drag distributions are obtained by RANS models, although an underestimation of turbulent kinetic energy production leads to an underprediction of drag. Nevertheless, RANS methods correctly predict trends in the drag data and the regions contributing most to viscous and pressure drag. Subsequently, RANS models are used to investigate the dependence of drag on the flow blockage ratio (boundary layer to roughness height ratio), finding that the drag increase due to denticles is halved when the blockage ratio δ / h is increased from 14 to 45. Our results provide an integrated understanding of the drag over non-ribletted denticles, enabling existing diverse drag data to be explained.
1 September 2017 in Applied Mathematical Modelling