12 March 2024 in IEEE Microwave and Wireless Technology Letters
A novel class of balanced-to-single-ended (BTSE) out-of-phase/3-dB power divider with added high-selectivity filtering and RF-input-quasi-absorptive capabilities is reported. This type of RF multifunctional power-division/filtering component consists of a planar/single-layer mixed-mode magic-T on microstrip-to-slotline transition with a resistively-terminated multistage transmission-line section loaded at its $\Sigma$ port, along with two reflective-type quadruplet-based bandpass-filter (BPF) units and phase-delay stages at its arms. In this manner, the fourth-order sharp-rejection filtering transfer function with two transmission zeros (TZs) of the embedded quadruplet BPF unit is co-integrated along with the RF power-splitting function. Furthermore, owing to the transversal cancellation at the input access between the out-of-band RF signals reflected by both the branches after the action of the phase-delay stage at the input of one arm, a differential-mode (DM) RF-input-quasi-absorptive behavior is obtained. The basic theoretical foundations and equivalent circuit model of the devised DM-input-quasi-reflectionless BTSE filtering power divider are shown. Furthermore, for practical validation purposes, a 3-GHz proof-of-concept prototype is built and tested.
26 July 2024 in IEEE Transactions on Microwave Theory and Techniques
A class of RF low-pass filters (LPFs) simultaneously featuring flat-in-band-group-delay and input-quasi-reflectionless characteristics is reported for the first time. By means of a multilayered complementary-diplexer-based topology, a single-ended input-quasi-reflectionless LPF with in-band quasi-flat group-delay response and multiple out-of-band transmission zeros (TZs) is first conceived. It consists of the combination of single-pole LPF units with resistively terminated microstrip-to-microstrip vertical slotline transitions (MS-to-MS VSTs). Subsequently, intrinsic common-mode-(CM)-signal suppression for its balanced counterpart is realized through in-series cascading two single-ended LPF stages with a coplanar stripline (CPS) section. As a result, a balanced LPF possessing differential-mode (DM) in-band quasi-constant group-delay response, DM input-quasi-absorptive behavior, and intrinsic CM suppression is obtained. Furthermore, to increase DM selectivity and out-of-band attenuation levels along with CM suppression levels, a higher rejection balanced LPF composed of multiple cascaded single-ended LPF units and CPS sections is also devised. The RF operating principles of the engineered single-ended and balanced LPF circuits are detailed. Three demonstrative prototypes—i.e., one single-ended and two balanced LPF circuits—are manufactured and characterized for practical validation purposes. For the higher rejection balanced LPF prototype, eye-diagram tests are also carried out to verify the quality/integrity of the transmitted DM signal in the time domain.
8 April 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
The theoretical design and practical development of RF analog filtering devices with co-integrated lowpass, single $\bm{/}$ multi-band bandpass, and highpass transfer functions is reported. For this purpose, two different classes of generalized frequency transformation that convert the equivalent normalized lowpass filter prototype into the desired RF filter with several co-designed filtering actions are proposed. They realize a frequency mapping of the reactance of a normalized unitary capacitor into that of a one-port single $/$ multi-resonance cell with added lowpass and highpass filtering capabilities. For these devised frequency transformations, the theoretical foundations and various illustrative filter examples designed at the ideal-circuit-model level are presented. In addition, higher-selectivity filter architectures based on the generation of additional out-of-band transmission zeros (TZs) by means of cross-coupling techniques are shown. Afterwards, the extension of this design methodology to RF multi-functional filtering components, such as input-reflectionless $\bm{/}$ absorptive filters based on complementary-diplexer circuit networks and two-way filtering power-distribution circuits, is also demonstrated. Furthermore, two design examples of distributed-element and inverterless lumped-element RF filters are provided. Besides, for the distributed-element circuit, a proof-of-concept microstrip prototype is manufactured and measured as experimental validation.
24 May 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
A class of reflectionless RF bandpass filters (BPFs) with wideband quasi-constant in-band group-delay response in transmission for high-data-rate digital-communication systems is presented. These BPFs are developed by exploiting multilayer wideband microstrip-to-microstrip vertical transitions and lossy multi-section microstrip lines in complementary-diplexer-based architectures. A two-port-reflectionless wideband BPF with low-in-band-variation equi-ripple-type group-delay characteristics is firstly realized by using two resistively-terminated one-section microstrip lines. To further flatten its passband group delay, its counterpart based on lossy two-section microstrip lines is then conceived to attain extremely-flat wideband group-delay pattern. Subsequently, by means of a modified wideband microstrip transition with a short-circuit-ended two-section microstrip line and a resistively-terminated two-section microstrip line, an input-reflectionless BPF with two close-to-passband transmission zeros (TZs) and wideband in-band flat group-delay profile is reported. In order to obtain a higher-order flat-group-delay wideband BPF response with more TZs, its structure shaped by two in-series-cascaded units of the previous input-absorptive BPF section with two TZs is engineered, in which different impedance values for their constituent short-circuit-ended microstrip lines are utilized. The operational foundations of all the proposed wideband flat-group-delay RF BPFs are described in detail. Furthermore, for practical-validation purposes, three 2-GHz microstrip prototypes of these reflectionless wideband RF BPFs with quasi-constant group-delay responses beyond their 3-dB absolute bandwidths (BWs) are designed, simulated, manufactured, and characterized.