Zekai Luo

Zekai Luo

Auto-generated profile, based on publicly available information

Zekai Luo

School of Opto-Electronic and Communication Engineering, Xiamen University of Technology, Xiamen, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
ZLZe-Kai Luo
Ze-Kai Luo
Tao SuTao Su
Tao Su
Kai-Da XuKai-Da Xu
Kai-Da Xu
A new design for dual-wideband microstrip patch antenna is proposed in this paper. A dual-band characteristic is obtained with the help of four loaded shorting vias. To widen both lower and upper impedance bandwidth, parasitic annular sectors are employed to introduce two additional resonant modes. For further demonstration, a prototype is manufactured and tested. The measured results which are close to the simulated results indicate that the proposed antenna can achieve 10-dB impedance bandwidth of 10.4% from 2.37 GHz to 2.63 GHz with a maximum realized gain of 5.2 dBi and 14.3% from 5.52 GHz to 6.37 GHz with a maximum realized gain of 6 dBi. Along the whole operating band, the antenna radiates similar patterns which resemble those generated by a monopole antenna. With these advantages, this proposed work is suitable to be applied in the WLAN communications.

26 July 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZLZekai Luo
Zekai Luo
LYLi Yang
Li Yang
TSTao Su
Tao Su
Forest Xi ZhuForest Xi Zhu
Forest Xi Zhu
RGRoberto Gómez-García
Roberto Gómez-García
A class of RF low-pass filters (LPFs) simultaneously featuring flat-in-band-group-delay and input-quasi-reflectionless characteristics is reported for the first time. By means of a multilayered complementary-diplexer-based topology, a single-ended input-quasi-reflectionless LPF with in-band quasi-flat group-delay response and multiple out-of-band transmission zeros (TZs) is first conceived. It consists of the combination of single-pole LPF units with resistively terminated microstrip-to-microstrip vertical slotline transitions (MS-to-MS VSTs). Subsequently, intrinsic common-mode-(CM)-signal suppression for its balanced counterpart is realized through in-series cascading two single-ended LPF stages with a coplanar stripline (CPS) section. As a result, a balanced LPF possessing differential-mode (DM) in-band quasi-constant group-delay response, DM input-quasi-absorptive behavior, and intrinsic CM suppression is obtained. Furthermore, to increase DM selectivity and out-of-band attenuation levels along with CM suppression levels, a higher rejection balanced LPF composed of multiple cascaded single-ended LPF units and CPS sections is also devised. The RF operating principles of the engineered single-ended and balanced LPF circuits are detailed. Three demonstrative prototypes—i.e., one single-ended and two balanced LPF circuits—are manufactured and characterized for practical validation purposes. For the higher rejection balanced LPF prototype, eye-diagram tests are also carried out to verify the quality/integrity of the transmitted DM signal in the time domain.

3 March 2026 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
RGRoberto Gómez-García
Roberto Gómez-García
LYLi Yang
Li Yang
MMMohamed Malki
Mohamed Malki
NINasrin Iranpour
Nasrin Iranpour
JAJim Darrel Ang
Jim Darrel Ang
Forest Xi ZhuForest Xi Zhu
Forest Xi Zhu
RF-signal power reflections produced by impedance mismatches remain a critical limitation in high-frequency systems, degrading their operational performance, robustness, and RF-signal integrity. Typical RF-protection mechanisms, such as inter-RF-stage attenuators, isolators $\boldsymbol {/}$ circulators, or RF-signal-cancellation loops, often impose penalties in terms of increased in-band insertion-loss levels, size, cost, DC-power consumption, and design complexity. To overcome these challenges, reflectionless or absorptive RF circuits have emerged as an alternative paradigm. They intrinsically absorb undesired stopband $\boldsymbol {/}$ non-transmitted RF signals, thereby providing broad-band impedance matching. This overview paper reviews the latest advances on RF reflectionless circuits, covering their fundamental RF design principles and more-recent developments. Beyond the well-established case of RF reflectionless filters illustrated through several state-of-the-art implementations in 3-D and planar technologies, other emerging designs are also addressed. They include reflectionless beyond-transmission-band-flat-group-delay single-ended bandpass filters and balanced lowpass filters for high-data-rate digital communications in planar and integrated RF platforms, and on-chip two-port-absorptive bandstop filters. Furthermore, as key examples of reflectionless RF active devices, millimeter-wave input-absorptive RF amplifiers for beyond-5G wireless scenarios are presented. Cutting-edge applications in antennas, electromagnetic compatibility (EMC), and quantum engineering are also discussed, highlighting the versatility of the reflectionless design philosophy.

17 September 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZLZekai Luo
Zekai Luo
TSTao Su
Tao Su
Kai-Da XuKai-Da Xu
Kai-Da Xu
To overcome electromagnetic interference (EMI) and thermal management issues in chip packages with metal lids or heat sinks, an innovative graphene-based absorptive gasket is proposed in this article. It comprises a dielectric layer and two identical lossy layers that are constituted of printed resistive graphene film with a specific pattern. The proposed gasket can be applied to the bottom of lids/heat sinks, introducing efficient absorption of electromagnetic (EM) energy emitted from internal interconnects and chip circuits in the Ku-and K-bands. Moreover, the presence of the gasket dramatically suppresses the initial parallel-plate mode resonances inside the chip package by means of shifting them to lower frequencies. As a result, the total radiated power (TRP) of the entire chip module can be significantly reduced over a frequency range of 2–28 GHz. Furthermore, the heat dissipation performance of the chip package applying the proposed gasket is enhanced considerably due to the distinguished thermal properties of graphene film. Experimental validations are conducted to verify the benefits of applying the proposed gasket. Fairly good agreements between the simulated and measured results are obtained.

21 August 2025 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
ZLZekai Luo
Zekai Luo
YLYuying Li
Yuying Li
TSTao Su
Tao Su
MZMu-Shui Zhang
Mu-Shui Zhang
LYLi Yang
Li Yang
RGRoberto Gómez-García
Roberto Gómez-García
An innovative type of wideband absorber for mitigating power noise in planar power distribution networks (PDNs) is reported. By means of a symmetrical multilayered configuration with lumped components mounted on the bottom layer, a broadband absorber featuring a quasi-reflectionless low-pass filtering response with over 90% of absorption from 2.75 to 13.74 GHz is engineered. With the conceived absorbers applied, the parallel-plate power noise propagating within planar PDNs is considerably consumed rather than being reflected or transmitted, thereby ensuring self-impedance stability while simultaneously reducing high-frequency power noise transmission and radiation. The radiofrequency (RF) operational principles of the devised absorber are thoroughly explained through its equivalent circuit model. Experimental validations are also carried out to verify the practical effectiveness of the proposed absorber approach, demonstrating reasonably close agreements between the simulated and measured results.

12 May 2026 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
ZLZekai Luo
Zekai Luo
LYLi Yang
Li Yang
RGRoberto Gómez-García
Roberto Gómez-García
A microwave linear-displacement sensor with two-port quasi-reflectionless behavior is proposed. It is made up of a balanced-circuit architecture comprising the following parts: 1) a reflective-type RF-sensing network—constructed by a pair of identical bi-path transversal-signal-interference (TSI) sections serving as the stator and a set of duplicated open-circuit-ended stubs built on a common slider—and 2) two uniform wideband 3-dB quadrature couplers—each composed of three-stage parallel coupled lines and a terminating resistor at the isolated node—at the input and output ports of the overall circuit. In this manner, the frequency spacing between the notch bands of the RF-sensing network varies as a function of slider displacement. Meanwhile, the nontransmitted RF-signal energy coming from the RF-sensing network is dissipated by the resistors of the couplers, thus achieving quasi-reflectionless characteristics at both ports. As experimental validation, a 2-GHz microstrip prototype of the conceived RF sensor exhibiting a 20-mm dynamic range and an averaged sensitivity of 59.4 MHz/mm is manufactured and tested.