1 April 2025 in FirePhysChem
This study conducted experiments and numerical simulations to investigate the Mechanical Properties of Fragments and Shock Waves generated blast. A combined impulse calculation model was established through the study of post-explosion motion patterns and impact load characteristics of fragments and shock waves acting on targets.The rationality of a combined impulse calculation model was verified using a sled test.Numerical model of square plates subjected to blast loading was established by LS-DYNA to analyze the influence of composite loads with different cased charges on a square plate at different standoff distances.The variation laws of the combined impulse under different standoff distances and different charge structures were obtained.Results indicated that the combined impulse exhibited an exponential decrease with standoff distance in the near-field region of the explosion.The impact acting on the target was characterized by perforation and deflection.The impulse acting on deflection and penetration due to the inertial effect of the target, energy absorption effect, was approximately 15.6% lower than the combined impulse at the beginning of the blast,the attenuation increases with the increase of distance.The length-to-diameter ratio of cased charges, the more the charge mass,the greater the combined impulse of the resulting multiple loads.With the same length-to-diameter ratio, increase the charge mass,the use of small-sized fragments or high-energy charges had an enhanced effect on the combined impulse.
1 January 2025 in Latin American Journal of Solids and Structures
In order to solve the problems related to the prediction of penetration depth of composite materials, a new method combining physical mechanism and data driving is proposed in this paper. This method integrates 53 groups of ballistic experimental data and 278 groups of LS-DYNA simulation data to construct a data set with 23 characteristic parameters. Previous studies have shown that the ratio of the radius of the circular arc of the warhead to the diameter of the projectile (CRH) has a significant influence on the penetration depth of the projectile. This paper uses the hyperbolic tangent function (tanh(2CRH)) to calculate its saturation effect and conduct in-depth analysis. An adaptive noise injection method of concrete type is used in data processing, which can reduce the data distribution difference between C80 and C150 to 42%. At the same time, because of the modified sequential forward selection algorithm, the input dimension of the model is reduced by 56% and its important physical characteristics are retained. Finally, a Bayesian-optimized Bagging integrated model is constructed, which realizes the high accuracy prediction of RMSE (Root mean square error)=0.23 m and R2=0.90 on the test set. The test data show that when the fiber content reaches about 1%, the penetration resistance of the material is obviously improved. This discovery provides a new direction for optimizing protective materials. Compared with the traditional Forrestal theoretical model, this model not only reduces the prediction error by 92%, but also verifies the effectiveness and universality of the "physical mechanism-guided + data-driven correction" hybrid modeling method in complex penetration problems, providing a generalizable research paradigm for similar engineering mechanics problems that are difficult to fully parameterize.
1 January 2026 in Latin American Journal of Solids and Structures
Equivalent-thickness conversion among metallic targets is important for vulnerability assessment and protection modelling, but conventional coefficients are often treated as material constants and seldom include fragment morphology. Penetration tests were conducted on 616 armor steel, Q235 steel, and LY12 aluminum alloy using steel spheres, tungsten spheres, and tungsten block fragments. A V50-based database was established, and failure mechanisms were examined from perforation morphology, exit-side SEM, and metallography. A semi-empirical ballistic-limit model was developed from key variables, with a residual correction term to describe the coupled deviation between fragment geometry and target response. The corrected model achieved a mean absolute percentage error of 7.91% and a coefficient of determination of 0.852. The conversion matrices show strong dependence on fragment type. For 616 steel converted to LY12 aluminum alloy, the coefficient increases from 2.50 for spherical fragments to 3.48 for tungsten blocks, giving a morphology-induced deviation of 39.03%. Thus, conversion should be defined by fragment type and target material rather than by a single material constant.
1 January 2026 in Latin American Journal of Solids and Structures
To support dynamic penetration decision-making, the millisecond-level real-time response requirement of missile attitude control systems requires efficient ballistic limit velocity (BLV) prediction models. This study proposes a deep learning model based on a YOLO–Mamba hybrid architecture, which achieves the adaptive modeling of multiphysical field coupling effects through feature cross-modules and polynomial expansion. The global feature extraction capability of YOLO and the local temporal modeling of Mamba synergistically enhance multiscale feature capture. In experiments, the model’s inference speed is 1.3 times greater than that of traditional methods, and its prediction error on ballistic datasets is reduced by 32.5–47.8% compared to those of SVM/random forests while maintaining a generalization accuracy of over 92% in data-scarce scenarios. The proposed model serves as a high-precision tool for the optimization of protective materials, and the YOLO–Mamba hybrid architecture offers a novel approach to data-driven modeling of complex impact dynamics problems.