Dmytro Strohonov

Dmytro Strohonov

Auto-generated profile, based on publicly available information

Dmytro Strohonov

E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine, Ukraine

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2025 in Advances in Science and Technology Research Journal
Verified
Journal Article
Open access
SGShiyi Gao
Shiyi Gao
VKVolodymyr Mykolayovych Korzhyk
Volodymyr Mykolayovych Korzhyk
DSDmytro Strohonov
Dmytro Strohonov
OTOleksii Tereshchenko
Oleksii Tereshchenko
ODOleksii Demіanov
Oleksii Demіanov
OGOleg Ganushchak
Oleg Ganushchak
This work demonstrates the possibility of producing spherical Ti-6Al-4V Grade 5 alloy powders with superior technological properties compared to those obtained through conventional industrial gas atomization methods for additive manufacturing, by utilizing plasma atomization of a 1.0 mm diameter...

1 November 2025 in Advances in Science and Technology Research Journal
Verified
Journal Article
Open access
VKVolodymyr Korzhyk
Volodymyr Korzhyk
DSDmytro Strohonov
Dmytro Strohonov
SGShiyi Gao
Shiyi Gao
OTOleksii Tereshchenko
Oleksii Tereshchenko
ODOleksii Demіanov
Oleksii Demіanov
XWXinxin Wang
Xinxin Wang
The possibility of producing spherical powder from Inconel 625 nickel-based superalloy using plasma-arc wire atomization technology in both non-transferred and transferred arc modes has been experimentally confirmed. Particle size distribution analysis showed that using the non-transferred arc...

29 April 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
VKVolodymyr Mykolayovych Korzhyk
Volodymyr Mykolayovych Korzhyk
Vladyslav KhaskinVladyslav Khaskin
Vladyslav Khaskin
OGOleg Ganushchak
Oleg Ganushchak
DSDmytro Strohonov
Dmytro Strohonov
YIYevhenii ILLIASHENKO
Yevhenii ILLIASHENKO
AAAndrii Aloshyn
Andrii Aloshyn
The object of this study is structural formation during the surfacing of steel (iron) on titanium with plasma-sprayed coatings to obtain a butt connection of titanium-steel bimetallic plates. The task to be solved was to devise a technology for applying a barrier layer between titanium and steel to obtain a defect-free butt joint of the edges of bimetallic sheets of carbon steel, clad with a layer of titanium, under conditions of arc or plasma surfacing of carbon steel on titanium. The application of the barrier layer was carried out by plasma spraying of steel wire or iron powder. In this case, a coating with a thickness of 150...750 μm was applied on Grade2 titanium, on which 1–2 mm thick layers of materials similar to the sprayed ones were deposited by arc and plasma deposition. It was established that during spraying with subsequent surfacing of steel wire or iron powder, the main technological factors for eliminating cracks in the resulting compound are the thickness of the sprayed coating and the amount of linear surfacing energy. The thickness of the sprayed coating was selected (at least 400...600 microns) followed by plasma surfacing of ER70S-6 steel wire with a diameter of 1.0 mm or CNPC-Fe200 iron powder with unit energy up to ~200...250 J/mm. A defect-free transition layer from titanium to steel was obtained. It is a continuous layer with a thickness of 50–60 microns, consisting of intermetalides FeTi and FeTi2, as well as a β-phase titanium with an enhanced iron content, which retains certain ductility without cracks and other defects. With the help of the devised approach for connecting titanium-steel bimetallic edges, it is planned to manufacture seam bimetallic pipes for main pipelines to transport oil and gas raw materials extracted from wells.

27 June 2024 in New Materials and Technologies in Metallurgy and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
SPStanislav Petrov
Stanislav Petrov
VKVolodymyr Mykolayovych Korzhyk
Volodymyr Mykolayovych Korzhyk
СБС. Г. Бондаренко
С. Г. Бондаренко
ДСД. В. Строганов
Д. В. Строганов
ВКВ. М. Коржик
В. М. Коржик
Purpose. To study the highly productive evaporation of aluminum micron powder in an atmospheric pressure plasma jet for the synthesis of nanoaluminum. Using special plasma technology, nanoparticles can be produced by rapid melting and evaporation of the initial micrometer particles and their subsequent re-nucleation. Research methods. Methods of mathematical and computer modeling of subsonic plasma turbulent jets at atmospheric pressure and experimental studies of two-phase processes during thermal plasma treatment using an arc plasma torch. Results. Based on computer modeling, a special reactor system was designed and developed, which includes a plasma-jet reactor with an electric arc plasma torch for the synthesis of aluminum nanoparticles. Numerical modeling makes it possible to determine the position of the melting point, evaporation and crushing of a molten particle, the evolution of the fractional composition of the dispersed phase, and find the speed and temperature of the particle in the area from its melting point to the crushing point. An experimental test of the operation of the reactor system was carried out using arc plasma torches with a power of 30 and 150 kW. It has been shown that intensifying the fragmentation of dispersed raw materials in a plasma jet can be useful in technologies for producing nanomaterials. The consequence of the fragmentation process is the redistribution of the fractional composition of the powder along the plasma jet and the accompanying changes in the dynamics of movement, heating and evaporation of particles. It has been determined that when the temperature of the largest aluminum particles reaches 2500 C, the total amount of evaporated mass is theoretically equal to 100%. The main parameters influencing the behavior of particles in a plasma jet are particle diameter, powder injection rate, flow rate, temperature and composition of the plasma gas. Taking these parameters into account will allow the process to operate at increased productivity. Scientific novelty. A mathematical description of the process of fragmentation a polydisperse powder, based on a continuum approach, has been obtained, which makes it possible to determine the position of the crushing point of a molten particle, the fractional composition of the dispersed phase, and find the speed and temperature of the particle in the area from its melting point to the point of crushing and evaporation. It was shown for the first time that it is possible to carry out a process in which complete evaporation of a molten drop is achieved due to the high enthalpy of the plasma before the end of mixing with steam. Practical value. A special reactor system has been designed and developed, which includes a plasma-jet reactor with an electric arc plasmatron for the synthesis of aluminum nanoparticles. The operating parameters of the reactor system have been determined, which will allow the synthesis of aluminum nanoparticles to be carried out with high productivity.

1 January 2026 in AIMS Materials Science
Verified
Journal Article
Open access
PDF file
VKVolodymyr Korzhyk
Volodymyr Korzhyk
DSDmytro Strohonov
Dmytro Strohonov
OTOleksii Tereshchenko
Oleksii Tereshchenko
SPSviatoslav Peleshenko
Sviatoslav Peleshenko
OGOleg Ganushchak
Oleg Ganushchak
YCYu Chen
Yu Chen
The article presents a review of modern designs of direct current arc plasma torches and the technological configurations used for plasma spheroidization of irregularly shaped powders. The study examines plasma torch designs employing both "hot" thermionic tungsten electrodes and "cold" autoemissive copper electrodes, demonstrating their ability to operate with various types of plasma-forming gas mixtures. The influence of the plasma-forming gas's composition on the electrode erosion intensity is analyzed, and approaches to improving the electrode's lifetime and overall torch reliability are outlined. The processes of particle heating, melting, and spheroidization are examined, along with the key parameters determining spheroidization efficiency: Plasma enthalpy and velocity, particle size, residence time in the high-temperature zone, and the powder feeding scheme. It is shown that radial feeding provides 70%–82% spherical particles, and up to 86%–97% under high-power operating conditions. Axial feeding achieves more than 95% spheroidized particles. Promising technological solutions aimed at increasing the productivity of the spheroidization of ceramic and metallic materials are also discussed.

24 February 2023 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
VKVolodymyr Mykolayovych Korzhyk
Volodymyr Mykolayovych Korzhyk
OBOleksii Burlachenko
Oleksii Burlachenko
DSDmytro Strohonov
Dmytro Strohonov
NFNataliia Fialko
Nataliia Fialko
MKMaksym Kharlamov
Maksym Kharlamov
SPSviatoslav Peleshenko
Sviatoslav Peleshenko
Existing techniques for applying intermetallide layers are characterized by low productivity, difficulties associated with the maintenance and operation of technological equipment, as well as significant costs for the purchase of materials for spraying. Therefore, modern science shows considerable interest in the development of new, highly effective technologies to form intermetallide coatings on the surface of articles. Such promising techniques include the technology of plasma-arc spraying (PAS) of flux-cored wires. This technique has a number of significant advantages, namely high performance, relative simplicity, as well as the affordability of equipment and materials for coating. This paper reports a study into the structure and properties of coatings obtained by flux-cored wire PAS, in which the steel sheath and aluminum powder filler interact when heated with the exothermic effect of Fe3Al synthesis. The influence of technological parameters of PAS process on the structure and properties of Fe-Al coatings was investigated by means of mathematical planning of the experiment. It was found that in all samples the main phase is an intermetallide of the Fe3Al type. Tests for gas-abrasive wear resistance at room temperature showed that the wear resistance of coatings exceeds the stability of steel S235 by an average of 2 times. As a result of studying the electrochemical properties in a 3-% aqueous solution of NaCl and in a 0.5-% solution of H2SO4, the score of corrosion resistance for these media was determined, which was, respectively, 4 and 5 (coatings belong to the group of "resistant"). In this regard, the practical use of coatings based on the Fe3Al intermetallide is recommended for protection against oxidation, corrosion, and gas-abrasive wear of components and assemblies in the heat power industry (heat exchanger pipes, catalytic converters, steam turbine blades, shut-off valves, etc.)