Undirected, sparse and large-scaled networks existing ubiquitously in practical engineering, are vitally important since they usually contain rich information in various patterns. Matrix factorization (MF) technique is an efficient method to extract the useful latent factors (LFs) from the LF model, which directly gives rise to the so-called MF model. However, most MF models cannot maintain some frequently encountered constraints such as non-negativity of LFs and the symmetry of the target network. In addition, in spite of its potential capability of obtaining the effectiveness of both the computation and the storage, the currently-developed double factorization (DF)-based model still suffers from the problem of the low prediction accuracy due to the limited amount of LFs. To address the above problems, a novel MF model is proposed in terms of the triple-factorization (TF) technique, thereby leading to TFbased symmetric and nonnegative latent factor (SNLF) models. Compared with the traditional DF-based SNLF model, the proposed TF-based SNLF model is equipped with: 1) constraints on symmetry and non-negativity; 2) desirable performance with high accuracy; 3) the convergence of the algorithm; and 4) fairly low storage and computational complexity. Furthermore, in order to reduce overfitting so as to further improve the model performance, regularization is precisely considered into the proposed TF-based SNLF model. Experiments on real data sets show that the proposed TF-based SNLF model has a whelming ability of improving the estimation accuracy for the missing data as well as guaranteeing the symmetry of the target network and the non-negativity of LFs at little bit expense of the computation and storage burden. Moreover, it is easy to be implemented for the data analysis.
18 October 2017 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
This paper is concerned with the robust H 2 /H ∞ model predictive control problem for a class of linear systems with polytopic uncertainties under weighted maximum-error-first and try-once-discard (MEF-TOD) protocol. To prevent data from collision, the weighted MEF-TOD protocol is employed during the data transmission from sensors to controller, where only one sensor is allowed to transmit the measurement at every time instant. A switched linear system is established with respect to the switching signals generated by the adopted weighted MEF-TOD protocol. By taking the influence of the exogenous disturbance and the weighted MEF-TOD protocol into consideration, an online optimization problem with nonconvex conditions is formulated. Then, to deal with the couplings of unknown variables, singular value decomposition technique is utilized to transform the nonconvex conditions into solvable ones. Subsequently, a set of dynamic output-feedback controllers is designed to guarantee the stability of the closed-loop system with guaranteed robust H 2 /H ∞ performance. Finally, a direct current motor example is used to illustrate the validity and effectiveness of the proposed methods.
In this paper, the efficient model predictive control (EMPC) problem of a class of nonlinear systems in the framework of interval type-2 Takagi-Sugeno (IT2 T-S) fuzzy is investigated. In order to improve the reliability of the data transmission while reducing the network communication burden, a so-called stochastic communication protocol (SCP) governed by a Markov chain is adopted to orchestrate the data transmission order from the controller to the actuator. The purpose of the addressed problem is to design a set of desired EMPC controllers so as to guarantee the mean-square system stability and obtain a good balance among the computation burden, the initial feasible region and the control performance. A novel control model is established for the SCP and IT2 T-S fuzzy nonlinearities in a unified representation by using a fuzzy periodic switching related to the transmission token and the membership function. Then, the system state, the SCP-based control perturbation, and the previous input under the SCP are fully taken into consideration for constructing the objective function. By virtue of the “min-max” strategy, a few optimizations are formulated, and the corresponding EMPC algorithm is provided, where the feedback gain is designed offline while the control perturbation is obtained online. Furthermore, by means of the matrix partition technique, sufficient conditions are presented to rigidly guarantee the feasibility of the proposed EMPC algorithm and the mean-square stability of the underlying IT2 T-S fuzzy system. Finally, two illustrative examples are utilized to demonstrate the validity of the proposed EMPC strategy.