A wideband reflective polarization converter based on metasurface is proposed in this paper. This converter can transform a linearly polarized (LP) incident electromagnetic (EM) wave into its orthogonal LP reflection wave in a lower band, and a circularly polarized (CP) reflection wave in a higher band. The unit cell of this converter is comprised of two meander-lines and one cut-wire printed on a dielectric substrate backed with metallic ground sheet. The simulation results show that the y/x-polarized incident EM wave can be converted to the x/y-polarized reflected wave over a fractional bandwidth of 59.6% from 6.53 to 12.07 GHz with a polarization conversion ratio (PCR) over 0.88. Besides, the y/x-polarized incident EM wave is converted to CP reflected wave from 13.70 to 15.60 GHz (a fractional bandwidth of 13.0%). To verify the polarization conversion performance, a sample consisting of 30 $\times$ 30 unit cells is fabricated and measured. The experimental and simulation results obtained are in a reasonable agreement, which verify the properties of the design.
1 October 2019 in IEEE Transactions on Antennas and Propagation
A planar antenna array based on checkerboard polarization conversion electromagnetic band-gap (EBG) structures with wideband circular polarization and low radar cross section (RCS) is presented. The array is formed by 2×2 circularly polarized (CP) element antennas fed with a sequential feeding network. On the one hand, CP radiation is obtained due to the polarization conversion characteristic of the metamaterials. A sequentially rotated feeding network is employed for wide operating bandwidth, polarization purity and radiation pattern symmetry. Measured results show that the array has a wide usable bandwidth of 18.4%, the common part of an impedance bandwidth of 37.3% (4.80-7.00 GHz), a 3-dB axial ratio (AR) bandwidth of 22.5% (5.00-6.27 GHz) and a 3-dB gain bandwidth of 18.4% (4.94-5.94 GHz). On the other hand, the checkerboard arrangement of the EBG structure generates both an in-band and a partial out-band RCS reduction under normal incidence for both x-and y-polarizations. Besides, the proposed array achieves a significant gain enhancement compared to the traditional slot array. The experimental and simulated results are in good agreement.
19 October 2020 in IEEE Transactions on Antennas and Propagation
A novel metasurface-based method for broadband radar cross section (RCS) reduction of circularly polarized patch antennas is proposed. The RCS reduction is achieved in a much broader band than the operational band of the antenna. The simple technique is based on metasurface (MS) units on a grounded substrate in a checkerboard-like configuration. The broadband RCS reduction is achieved by combining two different destructive interference principles. In the high frequency region, for a normal incident wave, the RCS is reduced by the phase cancellation generated by the MSs and the grounded substrate. In the low frequency region, the RCS is reduced by the polarization conversion property of the MS. In this case the fields reflected by two MS sections are in counter-phase for a normal incident wave. The metasurface is combined with a circularly polarized (CP) patch antenna. It concerns a traditional corner-truncated square patch and four sequentially rotated surrounding MS cells. This dedicated MS allows two things: an additional resonant mode is excited resulting in a 3-dB AR bandwidth extension from 4.2% to 15.9%, and a broadband RCS reduction of over 6 dB from 4.95 to 15.73 GHz (104.25% bandwidth) for both x-and y-polarized incident waves.
A metasurface (MS)-inspired low-profile circularly polarized (CP) slot array with a wide CP band and broadband low radar cross section (RCS) is proposed in this communication. The slot array consists of four element antennas, four grounded substrates, and a sequential-rotated feeding network. In terms of radiation performance, the array yields a wide CP band resulting from the CP element antenna and the sequential-rotated feeding network. The CP element antenna is achieved due to the polarization conversion property of the MS-based superstrate. The feeding network with multiple related design parameters is optimized by an artificial intelligence (AI)-driven antenna design method to find the widest bandwidth. In terms of scattering performance, broadband RCS reduction is achieved by using a hybrid RCS reduction technique that combines two destructive interference principles. The $\vert \text{S}_{11}\vert < -10$ dB bandwidth reaches 53.2%, the AR < 3 dB bandwidth reaches 50%, and the RCS reduction bandwidth reaches 147.8% for a low-profile structure with a relatively low number of MS unit cells. A prototype was fabricated and measured. The measured and simulated results are in good agreement.
5 August 2024 in IEEE Transactions on Antennas and Propagation
A metasurface (MS)-based low-profile, low radar cross section (RCS), wideband, and miniaturized microstrip patch array is proposed in this paper. First, a new method by combining reactive impedance surface and polarization conversion metasurface for antenna miniaturization and bandwidth enhancement as well as broadband RCS reduction is proposed. The proposed antenna is composed of a conventional patch antenna on top of an MS-based substrate. For the radiation performance, the antenna has a 10-dB impedance matching band of 22.3% and the overall volume is reduced to 78.9% after using the MS. For the scattering performance, broadband RCS reduction is achieved due to the polarization conversion characteristic of the MS. Over 10-dB RCS reduction is obtained from 6.10 to 18.90 GHz (a relative bandwidth of 106%). Second, the array composed of the 4×4 element antennas and a feeding network is constructed and discussed. A 25.6% 10-dB impedance matching bandwidth and 106% 6-dB RCS reduction bandwidth are obtained. The overall size of the proposed array is reduced to 76% compared to the array without the MS. A prototype of the array was fabricated and measured. The measured results and the simulated ones are in good agreement. The proposed array by combining reactive impedance surface and polarization conversion metasurface has the advantages of wideband, miniaturized size, low RCS, and low-profile, which can be used for radar, aircraft, and stealth platforms.