Jun Ding

Dr. Jun Ding


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 June 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
QZQi Zheng
Qi Zheng
CGChenjiang Guo
Chenjiang Guo
JDJun Ding
Jun Ding
A wideband reflective polarization converter based on metasurface is proposed in this paper. This converter can transform a linearly polarized (LP) incident electromagnetic (EM) wave into its orthogonal LP reflection wave in a lower band, and a circularly polarized (CP) reflection wave in a higher band. The unit cell of this converter is comprised of two meander-lines and one cut-wire printed on a dielectric substrate backed with metallic ground sheet. The simulation results show that the y/x-polarized incident EM wave can be converted to the x/y-polarized reflected wave over a fractional bandwidth of 59.6% from 6.53 to 12.07 GHz with a polarization conversion ratio (PCR) over 0.88. Besides, the y/x-polarized incident EM wave is converted to CP reflected wave from 13.70 to 15.60 GHz (a fractional bandwidth of 13.0%). To verify the polarization conversion performance, a sample consisting of 30 $\times$ 30 unit cells is fabricated and measured. The experimental and simulation results obtained are in a reasonable agreement, which verify the properties of the design.

28 January 2018 in International Journal of Microwave and Wireless Technologies
Verified
Journal Article
Closed access
PDF file
QZQi Zheng
Qi Zheng
CGChenjiang Guo
Chenjiang Guo
HLHaixiong Li
Haixiong Li
JDJun Ding
Jun Ding
A wideband and high-efficiency polarization conversion metasurface (PCM) is proposed and applied to reduce radar cross section (RCS). The proposed PCM unit is composed of two oblique asymmetry triangle split rings, which generate multiple plasmon resonances. Simulated and measured results demonstrate that it achieves polarization conversion over 90% from 9.24 to 17.64 GHz. Besides square checkerboard, the proposed PCM units and mirror units are arranged in triangle checkerboard. The mechanisms of both checkerboard PCMs are analyzed based on standard array theory, including the relationship between RCS reduction value and polarization conversion ratio value. The derived formulas provide a guideline to design checkerboard structure based on PCM. Simulated results demonstrate that both checkerboard PCMs achieve over 62% relative bandwidth of 10 dB RCS reduction under normal incidence with respect to the equal-sized metallic plate, which also means that the triangle one could be an alternative solution to reduce RCS. To verify the analyzed and simulated results, the fabricated sample and measured results of both checkerboard PCMs are presented. Good agreements are achieved between measurements, simulations and numerical analysis.

22 February 2023 in Electronics
Verified
Journal Article
Open access
PDF file
QLQiwei Li
Qiwei Li
JFJinyong Fang
Jinyong Fang
JDJun Ding
Jun Ding
WCWen Cao
Wen Cao
JSJing Sun
Jing Sun
TLTao Liu
Tao Liu
A novel tuning fork-shaped tri-band planar antenna (NTTPA) for the LTE 2.3/3.8-GHz band, WLAN 2.4/5.2/5.8-GHz band, and WiMax 2.5/3.5/5.5-GHz band is presented in this letter. By introducing an asymmetrical turning fork-shaped patch and an inverted L-shaped patch, three notched bands can be generated to form a triple-band operation. The antenna is fabricated on an FR4 board and excited by an SMA connector using a microstrip line. The antenna structure is simple and has a compact size of 45 mm × 40 mm. The measured operating frequency covers 2.2–2.63, 2.73–3.8, and 5.13–6.3 GHz, and the percentage bandwidth is close to 53.3% (S11 < −9.8 dB from 2.2 to 3.8 GHz) and 20.5% (S11 < −10 dB from 5.13 to 6.3 GHz). The calculated and experimental results suggest that the proposed antenna is one of the best candidates for wireless communication systems in terms of multi operating bands, broad percentage bandwidth (BW), compactness, stable radiation pattern, easy processing, and low cost.

3 May 2016 in Journal of Electromagnetic Waves and Applications
Verified
Journal Article
Closed access
YRY.-H. Ren
Y.-H. Ren
JDJun Ding
Jun Ding
CGC.-J. Guo
C.-J. Guo
YSY.-C. Song
Y.-C. Song
YQY. Qu
Y. Qu
A novel wideband and high gain dual-polarized antenna with log-periodic parasitic directors is presented in this paper. The antenna is composed of two cross printed dipole antennas vertically fixed on an aluminum plate as ground plane, which are excited by two similar micro-strip baluns. In order to further improve the gain with a broad bandwidth, the log-periodic parasitic directors are loaded on the printed dipole antennas innovatively. Measured results show that the proposed antenna achieves a –10 dB return loss with bandwidth of 1–2.1 GHz (71%), and its port isolation is higher than –20 dB within that band. Furthermore, the average gain of antenna is improved by 3 dB because of LPPDs.

6 May 2023 in Electronics
Verified
Journal Article
Open access
PDF file
QLQiwei Li
Qiwei Li
JFJinyong Fang
Jinyong Fang
WCWen Cao
Wen Cao
JSJing Sun
Jing Sun
JDJun Ding
Jun Ding
JWJiangniu Wu
Jiangniu Wu
A balanced bandpass filter (BPF) with an improved frequency selectivity for differential-mode (DM) excitation and high rejection for common-mode (CM) excitation is proposed in this paper. Two half-wavelength stepped impedance resonators (SIRs) are employed based on mixed electric and magnetic couplings to realize a DM passband centered at 2.48 GHz. The center frequency and bandwidth can be easily controlled by optimizing the dimensions of SIRs and the coupling between them, respectively. Meanwhile, two transmission zeros (TZs) are generated based on the mixed electric and magnetic couplings and are independently controlled by tuning the coupling strength. Moreover, a wide DM stopband can be realized by optimizing the SIRs. The proposed balanced BPF is fed by balanced U-type microstrip–slotline transition structures, which can achieve high wideband CM rejection without influencing the DM responses, and the design complexity can be clearly reduced. Finally, a balanced BPF is fabricated, and a good agreement between the simulation and the measurement is observed, which verifies the design method.

13 November 2018 in International Journal of Microwave and Wireless Technologies
Verified
Journal Article
Closed access
PDF file
JZJiakai Zhang
Jiakai Zhang
JXJiachen Xu
Jiachen Xu
YQYan Qu
Yan Qu
JDJun Ding
Jun Ding
CGChenjiang Guo
Chenjiang Guo
This paper proposes a microstrip antenna with reduced in-band and out-of-band radar cross-section (RCS) by subtracting the area of weak scattered current on the ground plane. Fourteen square slots were subtracted from the ground plane, reducing in-band and out-of-band RCS while maintaining radiation performance. Modified and reference antenna surface current distributions were simulated and analyzed in radiating and scattering modes. Two antenna prototypes were fabricated and measured to verify the simulation. The proposed antenna RCS was reduced compared with the reference antenna in the frequency range 1–4.4 GHz, including in-band and out-of-band frequency bands. Maximum in-band and out-of-band RCS reduction was 16.3 dBsm at the working frequency, and 19.3 dBsm at 3.4 GHz, respectively