16 August 2021 in IEEE Electron Device Letters
Cu-Cu direct bonding at low temperature with Cr wetting layer and Au passivation has been developed, and the bonding mechanism has been investigated. A chip-level Cu-to-Cu direct bonding can be achieved under a very low thermal budget condition at 70 °C for 90 s or 150 °C for 15 s, while wafer level bonding can be achieved at 100 °C under a low vacuum environment (10-2 Torr) by deposition of capping metal layers, which can protect Cu from oxidation, as well as reduce surface roughness and grain size of Cu. During the bonding process, Cu atoms diffuse through Cr/Au layers into the bonding interface, forming a new inter-layer without voids to achieve high quality bonding. The phenomenon of recrystallization and effects of grain size have been validated by TEM analyses. This Cu-Cu bonding with capping metal layers scheme can enable bonding with ultra-low thermal budget, excellent bonding quality, good electrical performance and high reliability, showing the great feasibility for the 3D integration applications.
9 August 2021 in IEEE Transactions on Electron Devices
A single-crystal islands (SCI) technique using low thermal budget pulse laser process is proposed and demonstrated to fabricate single-crystal silicon islands over amorphous dielectric for monolithic 3-D and back-end-of-line (BEOL) FinFET circuits. By laser recrystallizing mask-defined a-Si islands encapsulated with conformal silicon nitride film, designed single-crystal Si islands can be obtained. The single crystallinity of the island are verified with SECCO Etch, high-resolution electron microscopy (HREM), transmission electron microscopy (TEM), and electron backside scattering (EBSD). About 40 nm FinFETs were successfully fabricated in the SCI Si islands and shown to exhibit excellent electrical performance and low variability that are compatible with the FinFETs fabricated on commercial silicon-on-insulator (SOI) wafer.