1 January 2017 in AIP Conference Proceedings
In calibrating hydrological models, there are generally two stages of activity: 1) determining realistic model initial parameters in representing natural component physical processes, 2) entering initial parameter values which are then processed by trial error or automatically to obtain optimal values. To determine a realistic initial value, it takes experience and user knowledge of the model. This is a problem for beginner model users. This paper will present another approach to estimate the infiltration parameters in the tank model. The parameters will be approximated by the runoff coefficient of rational method. The value approach of infiltration parameter is simply described as the result of the difference in the percentage of total rainfall minus the percentage of runoff. It is expected that the results of this research will accelerate the calibration process of tank model parameters. The research was conducted on the sub-watershed Kali Bango in Malang Regency with an area of 239,71 km2. Infiltration measurements were carried out in January 2017 to March 2017. Analysis of soil samples at Soil Physics Laboratory, Department of Soil Science, Faculty of Agriculture, Universitas Brawijaya. Rainfall and discharge data were obtained from UPT PSAWS Bango Gedangan in Malang. Temperature, evaporation, relative humidity, wind speed data was obtained from BMKG station of Karang Ploso, Malang. The results showed that the infiltration coefficient at the top tank outlet can be determined its initial value by using the approach of the coefficient of runoff rational method with good result.
1 June 2018 in Journal of Water and Land Development
The aims of this study were to evaluate five infiltration models for mineral soils in the tropics with different land use types, such as settlements, plantations, rice fields, and forests. The infiltration models evaluated were Green–Ampt, Kostiakov, Kostiakov–Lewis, Philip, and Horton. The research was conducted at the Amprong watershed, Malang, Indonesia. The infiltration rate of the thirteen soil samples was analysed. The infiltration was tested using Turf-Tech infiltrometer. Moreover, each soil sample was tested in terms of the bulk density, specific gravity, porosity, soil moisture, and soil texture. The results of the study indicate that there is no significant difference (α = 5%) in the infiltration rate among the five models of infiltration. The infiltration rate in the study site was considered fast. Three models exhibiting the best performance are Kostiakov, Kostiakov–Lewis, and Horton model, respectively. The highest infiltration rate occurred in the forest land use while the lowest occurred in the rice field land use. The results of this study suggest that the infiltration model parameters correlate closely with the initial infiltration rate (fo) and the final infiltration rate (fc). In other words there is a correlation between the soil's ability to absorb water (representing the capillary force or horizontal flow) at the beginning of the infiltration (fo) and the gravity or the vertical flow upon reaching the final infiltration rate (fc).
15 November 2018 in Environmental Research, Engineering and Management
This research aimed at developing a conceptual hydrological model (tank model) with interception and root uptake. It was conducted in a sub-watershed of Coban Rondo located in an area with 89% forest and plantation land. 10-year rainfall and discharge data were used to perform calibration, verification and simulation. The calibration utilised a hybrid optimisation method of random search and genetic algorithm. A water balance equation was developed. The effect of interception and root uptake parameters on the modelling procedure was evaluated using the Nash-Sutcliffe Efficiency (NSE) coefficient and paired sample t-test. Results showed that, at a significance level of 5%, the interception and root uptake parameters had a significant effect on modelling (t Stat = 8.457 > t Critical two-tail = 1.980). The modelling performance increased by 26.98% with a NSE value of 0.91.DOI: http://dx.doi.org/10.5755/j01.erem.74.3.21154
1 November 2019 in IOP Conference Series: Materials Science and Engineering
Base flow was a vital component in controlling the flow of a river. Base flow came from the groundwater flow. Base flow was the river flow that occurred during the rainless period. Conceptual hydrology model was a model that displays the hydrology process in mathematical formulation and separating the production and routing functions. The tank model was one of the conceptual models. The tank model simulated the watershed by replacing some reservoirs with several tanks. This research aimed to identify the base flow using conceptual hydrology model. The study was conducted in the Bango sub-watershed.. The results exhibited that the tank model was dissatisfactory to simulate the surface flow compared to base flow. Surface flow model tended to be higher (overestimate) whereas the base flow tended to be lower (underestimate) compared to the observation data. The statistic test result displayed that the tank model could describe the base flow well.